From: Guenter Roeck <linux@roeck-us.net>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>,
Andrew Jeffery <andrew@aj.id.au>,
qemu-devel@nongnu.org, qemu-arm@nongnu.org,
Joel Stanley <joel@jms.id.au>, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH] hw/arm: ast2400/ast2500: Wire up EHCI controllers
Date: Thu, 6 Feb 2020 10:34:37 -0800 [thread overview]
Message-ID: <20200206183437.3979-1-linux@roeck-us.net> (raw)
Initialize EHCI controllers on AST2400 and AST2500 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux
successfully instantiates a USB interface.
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
hw/arm/aspeed_soc.c | 25 +++++++++++++++++++++++++
include/hw/arm/aspeed_soc.h | 6 ++++++
2 files changed, 31 insertions(+)
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index b5e809a1d3..696c7fda14 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -30,6 +30,7 @@ static const hwaddr aspeed_soc_ast2400_memmap[] = {
[ASPEED_IOMEM] = 0x1E600000,
[ASPEED_FMC] = 0x1E620000,
[ASPEED_SPI1] = 0x1E630000,
+ [ASPEED_EHCI1] = 0x1E6A1000,
[ASPEED_VIC] = 0x1E6C0000,
[ASPEED_SDMC] = 0x1E6E0000,
[ASPEED_SCU] = 0x1E6E2000,
@@ -59,6 +60,8 @@ static const hwaddr aspeed_soc_ast2500_memmap[] = {
[ASPEED_FMC] = 0x1E620000,
[ASPEED_SPI1] = 0x1E630000,
[ASPEED_SPI2] = 0x1E631000,
+ [ASPEED_EHCI1] = 0x1E6A1000,
+ [ASPEED_EHCI2] = 0x1E6A3000,
[ASPEED_VIC] = 0x1E6C0000,
[ASPEED_SDMC] = 0x1E6E0000,
[ASPEED_SCU] = 0x1E6E2000,
@@ -91,6 +94,8 @@ static const int aspeed_soc_ast2400_irqmap[] = {
[ASPEED_UART5] = 10,
[ASPEED_VUART] = 8,
[ASPEED_FMC] = 19,
+ [ASPEED_EHCI1] = 5,
+ [ASPEED_EHCI2] = 13,
[ASPEED_SDMC] = 0,
[ASPEED_SCU] = 21,
[ASPEED_ADC] = 31,
@@ -180,6 +185,11 @@ static void aspeed_soc_init(Object *obj)
sizeof(s->spi[i]), typename);
}
+ for (i = 0; i < sc->ehcis_num; i++) {
+ sysbus_init_child_obj(obj, "ehci[*]", OBJECT(&s->ehci[i]),
+ sizeof(s->ehci[i]), TYPE_PLATFORM_EHCI);
+ }
+
snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc),
typename);
@@ -364,6 +374,19 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp)
s->spi[i].ctrl->flash_window_base);
}
+ /* EHCI */
+ for (i = 0; i < sc->ehcis_num; i++) {
+ object_property_set_bool(OBJECT(&s->ehci[i]), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ sc->memmap[ASPEED_EHCI1 + i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ aspeed_soc_get_irq(s, ASPEED_EHCI1 + i));
+ }
+
/* SDMC - SDRAM Memory Controller */
object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
if (err) {
@@ -472,6 +495,7 @@ static void aspeed_soc_ast2400_class_init(ObjectClass *oc, void *data)
sc->silicon_rev = AST2400_A1_SILICON_REV;
sc->sram_size = 0x8000;
sc->spis_num = 1;
+ sc->ehcis_num = 1;
sc->wdts_num = 2;
sc->macs_num = 2;
sc->irqmap = aspeed_soc_ast2400_irqmap;
@@ -496,6 +520,7 @@ static void aspeed_soc_ast2500_class_init(ObjectClass *oc, void *data)
sc->silicon_rev = AST2500_A1_SILICON_REV;
sc->sram_size = 0x9000;
sc->spis_num = 2;
+ sc->ehcis_num = 2;
sc->wdts_num = 3;
sc->macs_num = 2;
sc->irqmap = aspeed_soc_ast2500_irqmap;
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 90ac7f7ffa..78b9f6ae53 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -26,8 +26,10 @@
#include "target/arm/cpu.h"
#include "hw/gpio/aspeed_gpio.h"
#include "hw/sd/aspeed_sdhci.h"
+#include "hw/usb/hcd-ehci.h"
#define ASPEED_SPIS_NUM 2
+#define ASPEED_EHCIS_NUM 2
#define ASPEED_WDTS_NUM 4
#define ASPEED_CPUS_NUM 2
#define ASPEED_MACS_NUM 4
@@ -50,6 +52,7 @@ typedef struct AspeedSoCState {
AspeedXDMAState xdma;
AspeedSMCState fmc;
AspeedSMCState spi[ASPEED_SPIS_NUM];
+ EHCISysBusState ehci[ASPEED_EHCIS_NUM];
AspeedSDMCState sdmc;
AspeedWDTState wdt[ASPEED_WDTS_NUM];
FTGMAC100State ftgmac100[ASPEED_MACS_NUM];
@@ -71,6 +74,7 @@ typedef struct AspeedSoCClass {
uint32_t silicon_rev;
uint64_t sram_size;
int spis_num;
+ int ehcis_num;
int wdts_num;
int macs_num;
const int *irqmap;
@@ -94,6 +98,8 @@ enum {
ASPEED_FMC,
ASPEED_SPI1,
ASPEED_SPI2,
+ ASPEED_EHCI1,
+ ASPEED_EHCI2,
ASPEED_VIC,
ASPEED_SDMC,
ASPEED_SCU,
--
2.17.1
next reply other threads:[~2020-02-06 18:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 18:34 Guenter Roeck [this message]
2020-02-07 8:16 ` [PATCH] hw/arm: ast2400/ast2500: Wire up EHCI controllers Cédric Le Goater
2020-02-07 12:58 ` Guenter Roeck
2020-02-07 13:05 ` Cédric Le Goater
2020-02-07 13:09 ` Joel Stanley
2020-02-07 14:21 ` Guenter Roeck
2020-02-07 14:30 ` Cédric Le Goater
2020-02-07 13:40 ` Philippe Mathieu-Daudé
2020-02-13 11:58 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206183437.3979-1-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andrew@aj.id.au \
--cc=clg@kaod.org \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).