From: Guenter Roeck <linux@roeck-us.net>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>,
Andrew Jeffery <andrew@aj.id.au>,
qemu-devel@nongnu.org, qemu-arm@nongnu.org,
Joel Stanley <joel@jms.id.au>, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2] hw/arm: ast2600: Wire up EHCI controllers
Date: Fri, 7 Feb 2020 09:45:48 -0800 [thread overview]
Message-ID: <20200207174548.9087-1-linux@roeck-us.net> (raw)
Initialize EHCI controllers on AST2600 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2600-evb
into Linux successfully instantiates a USB interface after
the necessary changes are made to its devicetree files.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 25, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: Manufacturer: Linux 5.5.0-09825-ga0802f2d0ef5-dirty ehci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-platform
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: Rebased to master (to fix context conflict)
Added Reviewed-by: tag
hw/arm/aspeed_ast2600.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 90cf1c755d..446b44d31c 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -31,6 +31,8 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
[ASPEED_FMC] = 0x1E620000,
[ASPEED_SPI1] = 0x1E630000,
[ASPEED_SPI2] = 0x1E641000,
+ [ASPEED_EHCI1] = 0x1E6A1000,
+ [ASPEED_EHCI2] = 0x1E6A3000,
[ASPEED_MII1] = 0x1E650000,
[ASPEED_MII2] = 0x1E650008,
[ASPEED_MII3] = 0x1E650010,
@@ -79,6 +81,8 @@ static const int aspeed_soc_ast2600_irqmap[] = {
[ASPEED_ADC] = 78,
[ASPEED_XDMA] = 6,
[ASPEED_SDHCI] = 43,
+ [ASPEED_EHCI1] = 5,
+ [ASPEED_EHCI2] = 9,
[ASPEED_EMMC] = 15,
[ASPEED_GPIO] = 40,
[ASPEED_GPIO_1_8V] = 11,
@@ -166,6 +170,11 @@ static void aspeed_soc_ast2600_init(Object *obj)
sizeof(s->spi[i]), typename);
}
+ for (i = 0; i < sc->ehcis_num; i++) {
+ sysbus_init_child_obj(obj, "ehci[*]", OBJECT(&s->ehci[i]),
+ sizeof(s->ehci[i]), TYPE_PLATFORM_EHCI);
+ }
+
snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc),
typename);
@@ -416,6 +425,19 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
s->spi[i].ctrl->flash_window_base);
}
+ /* EHCI */
+ for (i = 0; i < sc->ehcis_num; i++) {
+ object_property_set_bool(OBJECT(&s->ehci[i]), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ sc->memmap[ASPEED_EHCI1 + i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ aspeed_soc_get_irq(s, ASPEED_EHCI1 + i));
+ }
+
/* SDMC - SDRAM Memory Controller */
object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
if (err) {
@@ -534,6 +556,7 @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
sc->silicon_rev = AST2600_A0_SILICON_REV;
sc->sram_size = 0x10000;
sc->spis_num = 2;
+ sc->ehcis_num = 2;
sc->wdts_num = 4;
sc->macs_num = 4;
sc->irqmap = aspeed_soc_ast2600_irqmap;
--
2.17.1
next reply other threads:[~2020-02-07 17:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 17:45 Guenter Roeck [this message]
2020-02-07 21:25 ` [PATCH v2] hw/arm: ast2600: Wire up EHCI controllers Niek Linnenbank
2020-02-07 21:34 ` Guenter Roeck
2020-02-07 22:15 ` Niek Linnenbank
2020-02-07 22:04 ` no-reply
2020-02-07 22:48 ` Guenter Roeck
2020-02-11 8:12 ` Philippe Mathieu-Daudé
2020-02-11 19:13 ` Peter Maydell
2020-02-11 19:33 ` Guenter Roeck
2020-02-07 23:23 ` no-reply
2020-02-07 23:25 ` no-reply
2020-02-13 11:58 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207174548.9087-1-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andrew@aj.id.au \
--cc=clg@kaod.org \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).