From: Guenter Roeck <linux@roeck-us.net>
To: Peter Maydell <peter.maydell@linaro.org>,
Gerd Hoffmann <kraxel@redhat.com>
Cc: Beniamino Galvani <b.galvani@gmail.com>,
qemu-arm@nongnu.org, qemu-devel@nongnu.org,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2 3/3] arm: allwinner: Wire up USB ports
Date: Fri, 14 Feb 2020 16:12:48 -0800 [thread overview]
Message-ID: <20200215001248.2642-4-linux@roeck-us.net> (raw)
In-Reply-To: <20200215001248.2642-1-linux@roeck-us.net>
Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are
modeled as companions of the respective EHCI ports.
With this patch applied, USB controllers are discovered and instantiated
when booting the cubieboard machine with a recent Linux kernel.
ehci-platform 1c14000.usb: EHCI Host Controller
ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000
ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
ehci-platform 1c1c000.usb: EHCI Host Controller
ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
ohci-platform 1c14400.usb: Generic Platform OHCI controller
ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400
ohci-platform 1c1c400.usb: Generic Platform OHCI controller
ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
usb 2-1: new high-speed USB device number 2 using ehci-platform
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host1: usb-storage 2-1:1.0
usb 3-1: new full-speed USB device number 2 using ohci-platform
input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: Instantiate EHCI and OHCI in a single patch
Use define instead of ARRAY_SIZE to get the number of USB ports
Instantiate OHCI in companion mode
Use &error_fatal to handle error conditions
hw/arm/allwinner-a10.c | 43 ++++++++++++++++++++++++++++++++++
include/hw/arm/allwinner-a10.h | 6 +++++
2 files changed, 49 insertions(+)
diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c
index 45cd8d2db5..57275c92f5 100644
--- a/hw/arm/allwinner-a10.c
+++ b/hw/arm/allwinner-a10.c
@@ -24,12 +24,16 @@
#include "hw/arm/allwinner-a10.h"
#include "hw/misc/unimp.h"
#include "sysemu/sysemu.h"
+#include "hw/boards.h"
+#include "hw/usb/hcd-ohci.h"
#define AW_A10_CCM_REG_BASE 0x01c20000
#define AW_A10_PIC_REG_BASE 0x01c20400
#define AW_A10_PIT_REG_BASE 0x01c20c00
#define AW_A10_UART0_REG_BASE 0x01c28000
#define AW_A10_EMAC_BASE 0x01c0b000
+#define AW_A10_EHCI_BASE 0x01c14000
+#define AW_A10_OHCI_BASE 0x01c14400
#define AW_A10_SATA_BASE 0x01c18000
static void aw_a10_init(Object *obj)
@@ -53,6 +57,17 @@ static void aw_a10_init(Object *obj)
sysbus_init_child_obj(obj, "sata", &s->sata, sizeof(s->sata),
TYPE_ALLWINNER_AHCI);
+
+ if (machine_usb(current_machine)) {
+ int i;
+
+ for (i = 0; i < AW_A10_NUM_USB; i++) {
+ sysbus_init_child_obj(obj, "ehci[*]", OBJECT(&s->ehci[i]),
+ sizeof(s->ehci[i]), TYPE_PLATFORM_EHCI);
+ sysbus_init_child_obj(obj, "ohci[*]", OBJECT(&s->ohci[i]),
+ sizeof(s->ohci[i]), TYPE_SYSBUS_OHCI);
+ }
+ }
}
static void aw_a10_realize(DeviceState *dev, Error **errp)
@@ -133,6 +148,34 @@ static void aw_a10_realize(DeviceState *dev, Error **errp)
serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2,
qdev_get_gpio_in(dev, 1),
115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
+
+ if (machine_usb(current_machine)) {
+ int i;
+
+ for (i = 0; i < AW_A10_NUM_USB; i++) {
+ char bus[16];
+
+ sprintf(bus, "usb-bus.%d", i);
+
+ object_property_set_bool(OBJECT(&s->ehci[i]), true,
+ "companion-enable", &error_fatal);
+ object_property_set_bool(OBJECT(&s->ehci[i]), true, "realized",
+ &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ AW_A10_EHCI_BASE + i * 0x8000);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
+ qdev_get_gpio_in(dev, 39 + i));
+
+ object_property_set_str(OBJECT(&s->ohci[i]), bus, "masterbus",
+ &error_fatal);
+ object_property_set_bool(OBJECT(&s->ohci[i]), true, "realized",
+ &error_fatal);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->ohci[i]), 0,
+ AW_A10_OHCI_BASE + i * 0x8000);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci[i]), 0,
+ qdev_get_gpio_in(dev, 64 + i));
+ }
+ }
}
static void aw_a10_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h
index 0007a927bb..12ca731cb2 100644
--- a/include/hw/arm/allwinner-a10.h
+++ b/include/hw/arm/allwinner-a10.h
@@ -9,11 +9,15 @@
#include "hw/intc/allwinner-a10-pic.h"
#include "hw/net/allwinner_emac.h"
#include "hw/ide/ahci.h"
+#include "hw/usb/hcd-ohci.h"
+#include "hw/usb/hcd-ehci.h"
#include "target/arm/cpu.h"
#define AW_A10_SDRAM_BASE 0x40000000
+#define AW_A10_NUM_USB 2
+
#define TYPE_AW_A10 "allwinner-a10"
#define AW_A10(obj) OBJECT_CHECK(AwA10State, (obj), TYPE_AW_A10)
@@ -29,6 +33,8 @@ typedef struct AwA10State {
AwEmacState emac;
AllwinnerAHCIState sata;
MemoryRegion sram_a;
+ EHCISysBusState ehci[AW_A10_NUM_USB];
+ OHCISysBusState ohci[AW_A10_NUM_USB];
} AwA10State;
#endif
--
2.17.1
next prev parent reply other threads:[~2020-02-15 0:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-15 0:12 [PATCH v2 0/3] arm: allwinner: Wire up USB ports Guenter Roeck
2020-02-15 0:12 ` [PATCH v2 1/3] hw: usb: hcd-ohci: Move OHCISysBusState and TYPE_SYSBUS_OHCI to include file Guenter Roeck
2020-02-15 0:12 ` [PATCH v2 2/3] hcd-ehci: Introduce "companion-enable" sysbus property Guenter Roeck
2020-02-15 0:12 ` Guenter Roeck [this message]
2020-02-17 10:13 ` [PATCH v2 3/3] arm: allwinner: Wire up USB ports Peter Maydell
2020-02-17 18:05 ` Guenter Roeck
2020-02-17 8:21 ` [PATCH v2 0/3] " Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200215001248.2642-4-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=b.galvani@gmail.com \
--cc=kraxel@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).