From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH] target/arm: Honor the HCR_EL2.TSW bit
Date: Tue, 18 Feb 2020 08:47:17 -0800 [thread overview]
Message-ID: <20200218164717.12842-1-richard.henderson@linaro.org> (raw)
These bits trap EL1 access to set/way cache maintenance insns.
Buglink: https://bugs.launchpad.net/bugs/1863685
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
Based-on: <20200218152844.29351-1-richard.henderson@linaro.org>
("target/arm: Honor the HCR_EL2.{TVM,TRVM} bits")
Not really dependent on the above, but there will be a
trivial patch conflict without it.
r~
---
target/arm/helper.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 69946a57f8..b87518b97a 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -542,6 +542,16 @@ static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri,
return CP_ACCESS_OK;
}
+/* Check for traps from EL1 due to HCR_EL2.TSW. */
+static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) {
+ return CP_ACCESS_TRAP_EL2;
+ }
+ return CP_ACCESS_OK;
+}
+
static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
{
ARMCPU *cpu = env_archcpu(env);
@@ -4659,14 +4669,14 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.access = PL1_W, .type = ARM_CP_NOP },
{ .name = "DC_ISW", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2,
- .access = PL1_W, .type = ARM_CP_NOP },
+ .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP },
{ .name = "DC_CVAC", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1,
.access = PL0_W, .type = ARM_CP_NOP,
.accessfn = aa64_cacheop_access },
{ .name = "DC_CSW", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2,
- .access = PL1_W, .type = ARM_CP_NOP },
+ .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP },
{ .name = "DC_CVAU", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1,
.access = PL0_W, .type = ARM_CP_NOP,
@@ -4677,7 +4687,7 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
.accessfn = aa64_cacheop_access },
{ .name = "DC_CISW", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
- .access = PL1_W, .type = ARM_CP_NOP },
+ .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP },
/* TLBI operations */
{ .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
@@ -4858,17 +4868,17 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
{ .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1,
.type = ARM_CP_NOP, .access = PL1_W },
{ .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2,
- .type = ARM_CP_NOP, .access = PL1_W },
+ .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw },
{ .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1,
.type = ARM_CP_NOP, .access = PL1_W },
{ .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2,
- .type = ARM_CP_NOP, .access = PL1_W },
+ .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw },
{ .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1,
.type = ARM_CP_NOP, .access = PL1_W },
{ .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1,
.type = ARM_CP_NOP, .access = PL1_W },
{ .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
- .type = ARM_CP_NOP, .access = PL1_W },
+ .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw },
/* MMU Domain access control / MPU write buffer control */
{ .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0,
.access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0,
--
2.20.1
reply other threads:[~2020-02-18 16:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200218164717.12842-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).