From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, mihajlov@linux.ibm.com, david@redhat.com,
cohuck@redhat.com
Subject: [PATCH v4 11/16] s390x: protvirt: Move diag 308 data over SIDAD
Date: Thu, 20 Feb 2020 07:56:33 -0500 [thread overview]
Message-ID: <20200220125638.7241-12-frankja@linux.ibm.com> (raw)
In-Reply-To: <20200220125638.7241-1-frankja@linux.ibm.com>
For protected guests the IPIB is written/read to/from the satellite
block, so we need those accesses to go through
s390_cpu_pv_mem_read/write().
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
target/s390x/diag.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/target/s390x/diag.c b/target/s390x/diag.c
index aedc774695..be80c0367b 100644
--- a/target/s390x/diag.c
+++ b/target/s390x/diag.c
@@ -88,6 +88,7 @@ static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
{
CPUState *cs = env_cpu(env);
+ S390CPU *cpu = S390_CPU(cs);
uint64_t addr = env->regs[r1];
uint64_t subcode = env->regs[r3];
IplParameterBlock *iplb;
@@ -119,13 +120,22 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
return;
}
iplb = g_new0(IplParameterBlock, 1);
- cpu_physical_memory_read(addr, iplb, sizeof(iplb->len));
+ if (!env->pv) {
+ cpu_physical_memory_read(addr, iplb, sizeof(iplb->len));
+ } else {
+ s390_cpu_pv_mem_read(cpu, 0, iplb, sizeof(iplb->len));
+ }
+
if (!iplb_valid_len(iplb)) {
env->regs[r1 + 1] = DIAG_308_RC_INVALID;
goto out;
}
- cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
+ if (!env->pv) {
+ cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
+ } else {
+ s390_cpu_pv_mem_read(cpu, 0, iplb, be32_to_cpu(iplb->len));
+ }
if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
!(iplb_valid_pv(iplb) && s390_ipl_pv_check_components(iplb) >= 0)) {
@@ -137,7 +147,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
env->regs[r1 + 1] = DIAG_308_RC_OK;
out:
g_free(iplb);
- return;
+ break;
case DIAG308_STORE:
case DIAG308_PV_STORE:
if (diag308_parm_check(env, r1, addr, ra, true)) {
@@ -148,12 +158,18 @@ out:
} else {
iplb = s390_ipl_get_iplb();
}
- if (iplb) {
- cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
- env->regs[r1 + 1] = DIAG_308_RC_OK;
- } else {
+ if (!iplb) {
env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
+ return;
}
+
+ if (!env->pv) {
+ cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
+ } else {
+ s390_cpu_pv_mem_write(cpu, 0, iplb, be32_to_cpu(iplb->len));
+ }
+
+ env->regs[r1 + 1] = DIAG_308_RC_OK;
break;
case DIAG308_PV_START:
iplb = s390_ipl_get_iplb_secure();
--
2.20.1
next prev parent reply other threads:[~2020-02-20 13:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 12:56 [PATCH v4 00/16] s390x: Protected Virtualization support Janosch Frank
2020-02-20 12:56 ` [PATCH v4 01/16] Sync pv Janosch Frank
2020-02-25 9:42 ` David Hildenbrand
2020-02-25 11:10 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 02/16] s390x: protvirt: Add diag308 subcodes 8 - 10 Janosch Frank
2020-02-21 9:49 ` Cornelia Huck
2020-02-21 11:42 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 03/16] s390x: protvirt: Support unpack facility Janosch Frank
2020-02-24 14:13 ` Christian Borntraeger
2020-02-24 14:25 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 04/16] s390x: protvirt: Add migration blocker Janosch Frank
2020-02-25 9:50 ` David Hildenbrand
2020-02-25 11:21 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 05/16] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2020-02-20 12:56 ` [PATCH v4 06/16] s390x: protvirt: KVM intercept changes Janosch Frank
2020-02-25 10:01 ` David Hildenbrand
2020-02-25 11:33 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 07/16] s390x: Add SIDA memory ops Janosch Frank
2020-02-25 9:59 ` David Hildenbrand
2020-02-25 11:27 ` Janosch Frank
2020-02-20 12:56 ` [PATCH v4 08/16] s390x: protvirt: Move STSI data over SIDAD Janosch Frank
2020-02-25 10:05 ` David Hildenbrand
2020-02-20 12:56 ` [PATCH v4 09/16] s390x: protvirt: SCLP interpretation Janosch Frank
2020-02-20 12:56 ` [PATCH v4 10/16] s390x: protvirt: Set guest IPL PSW Janosch Frank
2020-02-20 12:56 ` Janosch Frank [this message]
2020-02-20 12:56 ` [PATCH v4 12/16] s390x: protvirt: Disable address checks for PV guest IO emulation Janosch Frank
2020-02-20 12:56 ` [PATCH v4 13/16] s390x: protvirt: Move IO control structures over SIDA Janosch Frank
2020-02-20 12:56 ` [PATCH v4 14/16] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2020-02-20 12:56 ` [PATCH v4 15/16] s390x: Add unpack feature to GA1 Janosch Frank
2020-02-25 9:53 ` David Hildenbrand
2020-02-20 12:56 ` [PATCH v4 16/16] docs: Add protvirt docs Janosch Frank
2020-02-21 10:00 ` Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220125638.7241-12-frankja@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=mihajlov@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).