From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 13/52] target/arm: Split out aa64_va_parameter_tbi, aa64_va_parameter_tbid
Date: Fri, 21 Feb 2020 13:07:01 +0000 [thread overview]
Message-ID: <20200221130740.7583-14-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200221130740.7583-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
For the purpose of rebuild_hflags_a64, we do not need to compute
all of the va parameters, only tbi. Moreover, we can compute them
in a form that is more useful to storing in hflags.
This eliminates the need for aa64_va_parameter_both, so fold that
in to aa64_va_parameter. The remaining calls to aa64_va_parameter
are in get_phys_addr_lpae and in pauth_helper.c.
This reduces the total cpu consumption of aa64_va_parameter in a
kernel boot plus a kvm guest kernel boot from 3% to 0.5%.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216194343.21331-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/internals.h | 3 --
target/arm/helper.c | 68 +++++++++++++++++++++++-------------------
2 files changed, 37 insertions(+), 34 deletions(-)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 58c4d707c5d..14328e3f7da 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -1127,15 +1127,12 @@ typedef struct ARMVAParameters {
unsigned tsz : 8;
unsigned select : 1;
bool tbi : 1;
- bool tbid : 1;
bool epd : 1;
bool hpd : 1;
bool using16k : 1;
bool using64k : 1;
} ARMVAParameters;
-ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va,
- ARMMMUIdx mmu_idx);
ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
ARMMMUIdx mmu_idx, bool data);
diff --git a/target/arm/helper.c b/target/arm/helper.c
index eec7b01ab35..8d0f6eca27b 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -10234,12 +10234,34 @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs)
}
#endif /* !CONFIG_USER_ONLY */
-ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va,
- ARMMMUIdx mmu_idx)
+static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx)
+{
+ if (regime_has_2_ranges(mmu_idx)) {
+ return extract64(tcr, 37, 2);
+ } else if (mmu_idx == ARMMMUIdx_Stage2) {
+ return 0; /* VTCR_EL2 */
+ } else {
+ return extract32(tcr, 20, 1);
+ }
+}
+
+static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx)
+{
+ if (regime_has_2_ranges(mmu_idx)) {
+ return extract64(tcr, 51, 2);
+ } else if (mmu_idx == ARMMMUIdx_Stage2) {
+ return 0; /* VTCR_EL2 */
+ } else {
+ return extract32(tcr, 29, 1);
+ }
+}
+
+ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
+ ARMMMUIdx mmu_idx, bool data)
{
uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
- bool tbi, tbid, epd, hpd, using16k, using64k;
- int select, tsz;
+ bool epd, hpd, using16k, using64k;
+ int select, tsz, tbi;
if (!regime_has_2_ranges(mmu_idx)) {
select = 0;
@@ -10248,11 +10270,9 @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va,
using16k = extract32(tcr, 15, 1);
if (mmu_idx == ARMMMUIdx_Stage2) {
/* VTCR_EL2 */
- tbi = tbid = hpd = false;
+ hpd = false;
} else {
- tbi = extract32(tcr, 20, 1);
hpd = extract32(tcr, 24, 1);
- tbid = extract32(tcr, 29, 1);
}
epd = false;
} else {
@@ -10266,28 +10286,30 @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va,
epd = extract32(tcr, 7, 1);
using64k = extract32(tcr, 14, 1);
using16k = extract32(tcr, 15, 1);
- tbi = extract64(tcr, 37, 1);
hpd = extract64(tcr, 41, 1);
- tbid = extract64(tcr, 51, 1);
} else {
int tg = extract32(tcr, 30, 2);
using16k = tg == 1;
using64k = tg == 3;
tsz = extract32(tcr, 16, 6);
epd = extract32(tcr, 23, 1);
- tbi = extract64(tcr, 38, 1);
hpd = extract64(tcr, 42, 1);
- tbid = extract64(tcr, 52, 1);
}
}
tsz = MIN(tsz, 39); /* TODO: ARMv8.4-TTST */
tsz = MAX(tsz, 16); /* TODO: ARMv8.2-LVA */
+ /* Present TBI as a composite with TBID. */
+ tbi = aa64_va_parameter_tbi(tcr, mmu_idx);
+ if (!data) {
+ tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx);
+ }
+ tbi = (tbi >> select) & 1;
+
return (ARMVAParameters) {
.tsz = tsz,
.select = select,
.tbi = tbi,
- .tbid = tbid,
.epd = epd,
.hpd = hpd,
.using16k = using16k,
@@ -10295,16 +10317,6 @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va,
};
}
-ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
- ARMMMUIdx mmu_idx, bool data)
-{
- ARMVAParameters ret = aa64_va_parameters_both(env, va, mmu_idx);
-
- /* Present TBI as a composite with TBID. */
- ret.tbi &= (data || !ret.tbid);
- return ret;
-}
-
#ifndef CONFIG_USER_ONLY
static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va,
ARMMMUIdx mmu_idx)
@@ -12134,21 +12146,15 @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el,
{
uint32_t flags = rebuild_hflags_aprofile(env);
ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx);
- ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1);
+ uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
uint64_t sctlr;
int tbii, tbid;
flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1);
/* Get control bits for tagged addresses. */
- if (regime_has_2_ranges(mmu_idx)) {
- ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1);
- tbid = (p1.tbi << 1) | p0.tbi;
- tbii = tbid & ~((p1.tbid << 1) | p0.tbid);
- } else {
- tbid = p0.tbi;
- tbii = tbid & !p0.tbid;
- }
+ tbid = aa64_va_parameter_tbi(tcr, mmu_idx);
+ tbii = tbid & ~aa64_va_parameter_tbid(tcr, mmu_idx);
flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii);
flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid);
--
2.20.1
next prev parent reply other threads:[~2020-02-21 13:14 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-21 13:06 [PULL 00/52] target-arm queue Peter Maydell
2020-02-21 13:06 ` [PULL 01/52] aspeed/scu: Create separate write callbacks Peter Maydell
2020-02-21 13:06 ` [PULL 02/52] aspeed/scu: Implement chip ID register Peter Maydell
2020-02-21 13:06 ` [PULL 03/52] hw/misc/iotkit-secctl: Fix writing to 'PPC Interrupt Clear' register Peter Maydell
2020-02-21 13:06 ` [PULL 04/52] mainstone: Make providing flash images non-mandatory Peter Maydell
2020-02-21 13:06 ` [PULL 05/52] z2: " Peter Maydell
2020-02-21 13:06 ` [PULL 06/52] target/arm: Flush high bits of sve register after AdvSIMD EXT Peter Maydell
2020-02-21 13:06 ` [PULL 07/52] target/arm: Flush high bits of sve register after AdvSIMD TBL/TBX Peter Maydell
2020-02-21 13:06 ` [PULL 08/52] target/arm: Flush high bits of sve register after AdvSIMD ZIP/UZP/TRN Peter Maydell
2020-02-21 13:06 ` [PULL 09/52] target/arm: Flush high bits of sve register after AdvSIMD INS Peter Maydell
2020-02-21 13:06 ` [PULL 10/52] target/arm: Use bit 55 explicitly for pauth Peter Maydell
2020-02-21 13:06 ` [PULL 11/52] target/arm: Fix select for aa64_va_parameters_both Peter Maydell
2020-02-21 13:07 ` [PULL 12/52] target/arm: Remove ttbr1_valid check from get_phys_addr_lpae Peter Maydell
2020-02-21 13:07 ` Peter Maydell [this message]
2020-02-21 13:07 ` [PULL 14/52] target/arm: Add _aa32_ to isar_feature functions testing 32-bit ID registers Peter Maydell
2020-02-21 13:07 ` [PULL 15/52] target/arm: Check aa32_pan in take_aarch32_exception(), not aa64_pan Peter Maydell
2020-02-21 13:07 ` [PULL 16/52] target/arm: Add isar_feature_any_fp16 and document naming/usage conventions Peter Maydell
2020-02-21 13:07 ` [PULL 17/52] target/arm: Define and use any_predinv isar_feature test Peter Maydell
2020-02-21 13:07 ` [PULL 18/52] target/arm: Factor out PMU register definitions Peter Maydell
2020-02-21 13:07 ` [PULL 19/52] target/arm: Add and use FIELD definitions for ID_AA64DFR0_EL1 Peter Maydell
2020-02-21 13:07 ` [PULL 20/52] target/arm: Use FIELD macros for clearing ID_DFR0 PERFMON field Peter Maydell
2020-02-21 13:07 ` [PULL 21/52] target/arm: Define an aa32_pmu_8_1 isar feature test function Peter Maydell
2020-02-21 13:07 ` [PULL 22/52] target/arm: Add _aa64_ and _any_ versions of pmu_8_1 isar checks Peter Maydell
2020-02-21 13:07 ` [PULL 23/52] target/arm: Stop assuming DBGDIDR always exists Peter Maydell
2020-02-21 13:07 ` [PULL 24/52] target/arm: Move DBGDIDR into ARMISARegisters Peter Maydell
2020-02-21 13:07 ` [PULL 25/52] target/arm: Read debug-related ID registers from KVM Peter Maydell
2020-02-21 13:07 ` [PULL 26/52] target/arm: Implement ARMv8.1-PMU extension Peter Maydell
2020-02-21 13:07 ` [PULL 27/52] target/arm: Implement ARMv8.4-PMU extension Peter Maydell
2020-02-21 13:07 ` [PULL 28/52] target/arm: Provide ARMv8.4-PMU in '-cpu max' Peter Maydell
2020-02-21 13:07 ` [PULL 29/52] target/arm: Correct definition of PMCRDP Peter Maydell
2020-02-21 13:07 ` [PULL 30/52] target/arm: Correct handling of PMCR_EL0.LC bit Peter Maydell
2020-02-21 13:07 ` [PULL 31/52] target/arm: Test correct register in aa32_pan and aa32_ats1e1 checks Peter Maydell
2020-02-21 13:07 ` [PULL 32/52] target/arm: Use isar_feature function for testing AA32HPD feature Peter Maydell
2020-02-21 13:07 ` [PULL 33/52] target/arm: Use FIELD_EX32 for testing 32-bit fields Peter Maydell
2020-02-21 13:07 ` [PULL 34/52] target/arm: Correctly implement ACTLR2, HACTLR2 Peter Maydell
2020-02-21 13:07 ` [PULL 35/52] hw: usb: hcd-ohci: Move OHCISysBusState and TYPE_SYSBUS_OHCI to include file Peter Maydell
2020-02-21 13:07 ` [PULL 36/52] hcd-ehci: Introduce "companion-enable" sysbus property Peter Maydell
2020-02-21 13:07 ` [PULL 37/52] arm: allwinner: Wire up USB ports Peter Maydell
2020-02-21 13:07 ` [PULL 38/52] target/arm: Vectorize USHL and SSHL Peter Maydell
2020-02-21 13:07 ` [PULL 39/52] target/arm: Convert PMUL.8 to gvec Peter Maydell
2020-02-21 13:07 ` [PULL 40/52] target/arm: Convert PMULL.64 " Peter Maydell
2020-02-21 13:07 ` [PULL 41/52] target/arm: Convert PMULL.8 " Peter Maydell
2020-02-21 13:07 ` [PULL 42/52] xilinx_spips: Correct the number of dummy cycles for the FAST_READ_4 cmd Peter Maydell
2020-02-21 13:07 ` [PULL 43/52] sh4: Fix PCI ISA IO memory subregion Peter Maydell
2020-02-21 13:07 ` [PULL 44/52] target/arm: Rename isar_feature_aa32_simd_r32 Peter Maydell
2020-02-21 13:07 ` [PULL 45/52] target/arm: Use isar_feature_aa32_simd_r32 more places Peter Maydell
2020-02-21 13:07 ` [PULL 46/52] target/arm: Set MVFR0.FPSP for ARMv5 cpus Peter Maydell
2020-02-21 13:07 ` [PULL 47/52] target/arm: Add isar_feature_aa32_simd_r16 Peter Maydell
2020-02-21 13:07 ` [PULL 48/52] target/arm: Rename isar_feature_aa32_fpdp_v2 Peter Maydell
2020-02-21 13:07 ` [PULL 49/52] target/arm: Add isar_feature_aa32_{fpsp_v2, fpsp_v3, fpdp_v3} Peter Maydell
2020-02-21 13:07 ` [PULL 50/52] target/arm: Perform fpdp_v2 check first Peter Maydell
2020-02-21 13:07 ` [PULL 51/52] target/arm: Replace ARM_FEATURE_VFP3 checks with fp{sp, dp}_v3 Peter Maydell
2020-02-21 13:07 ` [PULL 52/52] target/arm: Add missing checks for fpsp_v2 Peter Maydell
2020-02-21 14:17 ` [PULL 00/52] target-arm queue no-reply
2020-02-21 16:06 ` no-reply
2020-02-21 16:10 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200221130740.7583-14-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).