From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, qemu-s390x@nongnu.org, cohuck@redhat.com,
david@redhat.com
Subject: [PATCH v5 01/18] s390x: Use constant for ESA PSW address
Date: Wed, 26 Feb 2020 07:20:21 -0500 [thread overview]
Message-ID: <20200226122038.61481-2-frankja@linux.ibm.com> (raw)
In-Reply-To: <20200226122038.61481-1-frankja@linux.ibm.com>
Lets make it a bit more clear that we're extracting the 31 bit address
from the short psw.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
hw/s390x/ipl.c | 2 +-
target/s390x/cpu.c | 4 ++--
target/s390x/cpu.h | 1 +
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 7773499d7f..42e21e7a6a 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -179,7 +179,7 @@ static void s390_ipl_realize(DeviceState *dev, Error **errp)
/* if not Linux load the address of the (short) IPL PSW */
ipl_psw = rom_ptr(4, 4);
if (ipl_psw) {
- pentry = be32_to_cpu(*ipl_psw) & 0x7fffffffUL;
+ pentry = be32_to_cpu(*ipl_psw) & PSW_MASK_ESA_ADDR;
} else {
error_setg(&err, "Could not get IPL PSW");
goto error;
diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
index 8da1905485..43360912a0 100644
--- a/target/s390x/cpu.c
+++ b/target/s390x/cpu.c
@@ -78,13 +78,13 @@ static void s390_cpu_load_normal(CPUState *s)
S390CPU *cpu = S390_CPU(s);
uint64_t spsw = ldq_phys(s->as, 0);
- cpu->env.psw.mask = spsw & 0xffffffff80000000ULL;
+ cpu->env.psw.mask = spsw & PSW_MASK_ESA_MASK;
/*
* Invert short psw indication, so SIE will report a specification
* exception if it was not set.
*/
cpu->env.psw.mask ^= PSW_MASK_SHORTPSW;
- cpu->env.psw.addr = spsw & 0x7fffffffULL;
+ cpu->env.psw.addr = spsw & PSW_MASK_ESA_ADDR;
s390_cpu_set_state(S390_CPU_STATE_OPERATING, cpu);
}
diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
index 8a557fd8d1..74e66fe0c2 100644
--- a/target/s390x/cpu.h
+++ b/target/s390x/cpu.h
@@ -277,6 +277,7 @@ extern const VMStateDescription vmstate_s390_cpu;
#define PSW_MASK_64 0x0000000100000000ULL
#define PSW_MASK_32 0x0000000080000000ULL
#define PSW_MASK_ESA_ADDR 0x000000007fffffffULL
+#define PSW_MASK_ESA_MASK 0xffffffff80000000ULL
#undef PSW_ASC_PRIMARY
#undef PSW_ASC_ACCREG
--
2.20.1
next prev parent reply other threads:[~2020-02-26 12:21 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 12:20 [PATCH v5 00/18] s390x: Protected Virtualization support Janosch Frank
2020-02-26 12:20 ` Janosch Frank [this message]
2020-02-26 13:46 ` [PATCH v5 01/18] s390x: Use constant for ESA PSW address Christian Borntraeger
2020-02-26 13:47 ` Janosch Frank
2020-02-26 14:27 ` David Hildenbrand
2020-02-26 17:51 ` Cornelia Huck
2020-02-26 17:52 ` David Hildenbrand
2020-02-27 7:53 ` Janosch Frank
2020-02-27 8:09 ` Janosch Frank
2020-02-27 9:06 ` Cornelia Huck
2020-02-27 9:23 ` [PATCH v6] s390x: Rename and use constants for short PSW address and mask Janosch Frank
2020-02-27 9:27 ` David Hildenbrand
2020-02-27 10:36 ` Cornelia Huck
2020-02-26 12:20 ` [PATCH v5 02/18] Sync pv Janosch Frank
2020-02-26 12:20 ` [PATCH v5 03/18] s390x: protvirt: Add diag308 subcodes 8 - 10 Janosch Frank
2020-02-26 12:20 ` [PATCH v5 04/18] s390x: protvirt: Support unpack facility Janosch Frank
2020-02-26 12:20 ` [PATCH v5 05/18] s390x: protvirt: Add migration blocker Janosch Frank
2020-02-26 14:05 ` Christian Borntraeger
2020-02-26 14:08 ` Janosch Frank
2020-02-26 12:20 ` [PATCH v5 06/18] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2020-02-26 15:00 ` Christian Borntraeger
2020-02-26 15:11 ` Janosch Frank
2020-02-26 12:20 ` [PATCH v5 07/18] s390x: protvirt: Inhibit balloon when switching to protected mode Janosch Frank
2020-02-26 14:59 ` David Hildenbrand
2020-02-26 15:06 ` Christian Borntraeger
2020-02-26 15:16 ` David Hildenbrand
2020-02-26 15:30 ` Janosch Frank
2020-02-26 15:31 ` David Hildenbrand
2020-02-26 18:24 ` Cornelia Huck
2020-03-03 12:42 ` Christian Borntraeger
2020-02-26 15:11 ` Janosch Frank
2020-02-26 15:13 ` Christian Borntraeger
2020-02-26 15:15 ` David Hildenbrand
2020-02-27 12:24 ` Halil Pasic
2020-03-19 13:42 ` Halil Pasic
2020-03-19 13:54 ` David Hildenbrand
2020-03-19 15:40 ` Halil Pasic
2020-03-19 17:31 ` David Hildenbrand
2020-03-20 18:43 ` Halil Pasic
2020-03-24 21:07 ` Brijesh Singh
2020-03-27 10:50 ` David Hildenbrand
2020-03-19 17:45 ` Michael S. Tsirkin
2020-03-20 9:36 ` David Hildenbrand
2020-03-29 14:48 ` Michael S. Tsirkin
2020-03-31 8:59 ` David Hildenbrand
2020-02-26 12:20 ` [PATCH v5 08/18] s390x: protvirt: KVM intercept changes Janosch Frank
2020-02-26 12:20 ` [PATCH v5 09/18] s390x: Add SIDA memory ops Janosch Frank
2020-02-26 12:20 ` [PATCH v5 10/18] s390x: protvirt: Move STSI data over SIDAD Janosch Frank
2020-02-26 12:20 ` [PATCH v5 11/18] s390x: protvirt: SCLP interpretation Janosch Frank
2020-02-26 12:20 ` [PATCH v5 12/18] s390x: protvirt: Set guest IPL PSW Janosch Frank
2020-02-26 12:20 ` [PATCH v5 13/18] s390x: protvirt: Move diag 308 data over SIDAD Janosch Frank
2020-02-26 12:20 ` [PATCH v5 14/18] s390x: protvirt: Disable address checks for PV guest IO emulation Janosch Frank
2020-02-26 12:20 ` [PATCH v5 15/18] s390x: protvirt: Move IO control structures over SIDA Janosch Frank
2020-02-26 12:20 ` [PATCH v5 16/18] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2020-02-26 12:20 ` [PATCH v5 17/18] s390x: Add unpack facility feature to GA1 Janosch Frank
2020-02-26 12:20 ` [PATCH v5 18/18] docs: Add protvirt docs Janosch Frank
2020-02-26 20:09 ` [PATCH v5 00/18] s390x: Protected Virtualization support Cornelia Huck
2020-02-27 8:32 ` Janosch Frank
2020-03-03 15:50 ` [PATCH] pc-bios: s390x: Save iplb location in lowcore Janosch Frank
2020-03-03 16:13 ` David Hildenbrand
2020-03-04 8:59 ` Janosch Frank
2020-03-04 9:05 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200226122038.61481-2-frankja@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).