From: Denis Plotnikov <dplotnikov@virtuozzo.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, vsementsov@virtuozzo.com,
qemu-block@nongnu.org, armbru@redhat.com, mreitz@redhat.com,
den@openvz.org
Subject: [PATCH v3 2/4] qcow2: rework the cluster compression routine
Date: Tue, 3 Mar 2020 13:59:48 +0300 [thread overview]
Message-ID: <20200303105950.26744-3-dplotnikov@virtuozzo.com> (raw)
In-Reply-To: <20200303105950.26744-1-dplotnikov@virtuozzo.com>
The patch enables processing the image compression type defined
for the image and chooses an appropriate method for image clusters
(de)compression.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
---
block/qcow2-threads.c | 77 +++++++++++++++++++++++++++++++++++--------
1 file changed, 63 insertions(+), 14 deletions(-)
diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c
index 77bb578cdf..9288a4f852 100644
--- a/block/qcow2-threads.c
+++ b/block/qcow2-threads.c
@@ -74,7 +74,9 @@ typedef struct Qcow2CompressData {
} Qcow2CompressData;
/*
- * qcow2_compress()
+ * qcow2_zlib_compress()
+ *
+ * Compress @src_size bytes of data using zlib compression method
*
* @dest - destination buffer, @dest_size bytes
* @src - source buffer, @src_size bytes
@@ -83,8 +85,8 @@ typedef struct Qcow2CompressData {
* -ENOMEM destination buffer is not enough to store compressed data
* -EIO on any other error
*/
-static ssize_t qcow2_compress(void *dest, size_t dest_size,
- const void *src, size_t src_size)
+static ssize_t qcow2_zlib_compress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
{
ssize_t ret;
z_stream strm;
@@ -119,19 +121,19 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,
}
/*
- * qcow2_decompress()
+ * qcow2_zlib_decompress()
*
* Decompress some data (not more than @src_size bytes) to produce exactly
- * @dest_size bytes.
+ * @dest_size bytes using zlib compression method
*
* @dest - destination buffer, @dest_size bytes
* @src - source buffer, @src_size bytes
*
* Returns: 0 on success
- * -1 on fail
+ * -EIO on failure
*/
-static ssize_t qcow2_decompress(void *dest, size_t dest_size,
- const void *src, size_t src_size)
+static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
{
int ret = 0;
z_stream strm;
@@ -144,7 +146,7 @@ static ssize_t qcow2_decompress(void *dest, size_t dest_size,
ret = inflateInit2(&strm, -12);
if (ret != Z_OK) {
- return -1;
+ return -EIO;
}
ret = inflate(&strm, Z_FINISH);
@@ -154,7 +156,7 @@ static ssize_t qcow2_decompress(void *dest, size_t dest_size,
* @src buffer may be processed partly (because in qcow2 we know size of
* compressed data with precision of one sector)
*/
- ret = -1;
+ ret = -EIO;
}
inflateEnd(&strm);
@@ -189,20 +191,67 @@ qcow2_co_do_compress(BlockDriverState *bs, void *dest, size_t dest_size,
return arg.ret;
}
+/*
+ * qcow2_co_compress()
+ *
+ * Compress @src_size bytes of data using the compression
+ * method defined by the image compression type
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: compressed size on success
+ * a negative error code on failure
+ */
ssize_t coroutine_fn
qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
const void *src, size_t src_size)
{
- return qcow2_co_do_compress(bs, dest, dest_size, src, src_size,
- qcow2_compress);
+ BDRVQcow2State *s = bs->opaque;
+ Qcow2CompressFunc fn;
+
+ switch (s->compression_type) {
+ case QCOW2_COMPRESSION_TYPE_ZLIB:
+ fn = qcow2_zlib_compress;
+ break;
+
+ default:
+ abort();
+ }
+
+ return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn);
}
+/*
+ * qcow2_co_decompress()
+ *
+ * Decompress some data (not more than @src_size bytes) to produce exactly
+ * @dest_size bytes using the compression method defined by the image
+ * compression type
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: 0 on success
+ * a negative error code on failure
+ */
ssize_t coroutine_fn
qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size,
const void *src, size_t src_size)
{
- return qcow2_co_do_compress(bs, dest, dest_size, src, src_size,
- qcow2_decompress);
+ BDRVQcow2State *s = bs->opaque;
+ Qcow2CompressFunc fn;
+
+ switch (s->compression_type) {
+ case QCOW2_COMPRESSION_TYPE_ZLIB:
+ fn = qcow2_zlib_decompress;
+ break;
+
+ default:
+ return -ENOTSUP;
+ }
+
+ return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn);
}
--
2.17.0
next prev parent reply other threads:[~2020-03-03 11:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 10:59 [PATCH v3 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
2020-03-03 10:59 ` [PATCH v3 1/4] qcow2: introduce compression type feature Denis Plotnikov
2020-03-03 10:59 ` Denis Plotnikov [this message]
2020-03-03 10:59 ` [PATCH v3 3/4] qcow2: add zstd cluster compression Denis Plotnikov
2020-03-03 10:59 ` [PATCH v3 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303105950.26744-3-dplotnikov@virtuozzo.com \
--to=dplotnikov@virtuozzo.com \
--cc=armbru@redhat.com \
--cc=den@openvz.org \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).