From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 12/33] qemu-doc: remove indices other than findex
Date: Fri, 6 Mar 2020 11:09:38 +0000 [thread overview]
Message-ID: <20200306110959.29461-13-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200306110959.29461-1-peter.maydell@linaro.org>
From: Paolo Bonzini <pbonzini@redhat.com>
These indices are not well-maintained, and pandoc also chokes on the
directives. Just nuke them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-13-peter.maydell@linaro.org
Message-id: 20200226113034.6741-13-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
docs/system/keys.texi | 10 --------
docs/system/monitor.texi | 1 -
docs/system/mux-chardev.texi | 7 ------
docs/system/quickstart.texi | 1 -
docs/system/target-arm.texi | 1 -
docs/system/target-i386.texi | 1 -
docs/system/target-m68k.texi | 2 --
docs/system/target-mips.texi | 2 --
docs/system/target-ppc.texi | 1 -
docs/system/target-sparc.texi | 1 -
docs/system/target-sparc64.texi | 1 -
docs/system/target-xtensa.texi | 1 -
qemu-doc.texi | 44 ---------------------------------
13 files changed, 73 deletions(-)
diff --git a/docs/system/keys.texi b/docs/system/keys.texi
index 4c74b3bf4dd..c04daf54f23 100644
--- a/docs/system/keys.texi
+++ b/docs/system/keys.texi
@@ -10,23 +10,18 @@ then the modifier is Ctrl-Alt-Shift (instead of Ctrl-Alt) and if you use
@table @key
@item Ctrl-Alt-f
-@kindex Ctrl-Alt-f
Toggle full screen
@item Ctrl-Alt-+
-@kindex Ctrl-Alt-+
Enlarge the screen
@item Ctrl-Alt--
-@kindex Ctrl-Alt--
Shrink the screen
@item Ctrl-Alt-u
-@kindex Ctrl-Alt-u
Restore the screen's un-scaled dimensions
@item Ctrl-Alt-n
-@kindex Ctrl-Alt-n
Switch to virtual console 'n'. Standard console mappings are:
@table @emph
@item 1
@@ -38,14 +33,9 @@ Serial port
@end table
@item Ctrl-Alt
-@kindex Ctrl-Alt
Toggle mouse and keyboard grab.
@end table
-@kindex Ctrl-Up
-@kindex Ctrl-Down
-@kindex Ctrl-PageUp
-@kindex Ctrl-PageDown
In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
@key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
diff --git a/docs/system/monitor.texi b/docs/system/monitor.texi
index c5b6a9b38e4..b41b144885d 100644
--- a/docs/system/monitor.texi
+++ b/docs/system/monitor.texi
@@ -1,6 +1,5 @@
@node pcsys_monitor
@section QEMU Monitor
-@cindex QEMU monitor
The QEMU monitor is used to give complex commands to the QEMU
emulator. You can use it to:
diff --git a/docs/system/mux-chardev.texi b/docs/system/mux-chardev.texi
index c9a2d14cb88..b21c2c56540 100644
--- a/docs/system/mux-chardev.texi
+++ b/docs/system/mux-chardev.texi
@@ -12,26 +12,19 @@ you're using the default.
@table @key
@item Ctrl-a h
-@kindex Ctrl-a h
Print this help
@item Ctrl-a x
-@kindex Ctrl-a x
Exit emulator
@item Ctrl-a s
-@kindex Ctrl-a s
Save disk data back to file (if -snapshot)
@item Ctrl-a t
-@kindex Ctrl-a t
Toggle console timestamps
@item Ctrl-a b
-@kindex Ctrl-a b
Send break (magic sysrq in Linux)
@item Ctrl-a c
-@kindex Ctrl-a c
Rotate between the frontends connected to the multiplexer (usually
this switches between the monitor and the console)
@item Ctrl-a Ctrl-a
-@kindex Ctrl-a Ctrl-a
Send the escape character to the frontend
@end table
@c man end
diff --git a/docs/system/quickstart.texi b/docs/system/quickstart.texi
index ed7295de7a2..baceaa96eb2 100644
--- a/docs/system/quickstart.texi
+++ b/docs/system/quickstart.texi
@@ -1,6 +1,5 @@
@node pcsys_quickstart
@section Quick Start
-@cindex quick start
Download and uncompress a PC hard disk image with Linux installed (e.g.
@file{linux.img}) and type:
diff --git a/docs/system/target-arm.texi b/docs/system/target-arm.texi
index 040d77b5e05..c56b5f6ebfe 100644
--- a/docs/system/target-arm.texi
+++ b/docs/system/target-arm.texi
@@ -1,6 +1,5 @@
@node ARM System emulator
@section ARM System emulator
-@cindex system emulation (ARM)
Use the executable @file{qemu-system-arm} to simulate a ARM
machine. The ARM Integrator/CP board is emulated with the following
diff --git a/docs/system/target-i386.texi b/docs/system/target-i386.texi
index edd23fa8df5..cc352b89a84 100644
--- a/docs/system/target-i386.texi
+++ b/docs/system/target-i386.texi
@@ -1,6 +1,5 @@
@node x86 (PC) System emulator
@section x86 (PC) System emulator
-@cindex system emulation (PC)
@menu
* pcsys_devices:: Peripherals
diff --git a/docs/system/target-m68k.texi b/docs/system/target-m68k.texi
index b5bc9df40ae..a77b19ea0f1 100644
--- a/docs/system/target-m68k.texi
+++ b/docs/system/target-m68k.texi
@@ -1,7 +1,5 @@
@node ColdFire System emulator
@section ColdFire System emulator
-@cindex system emulation (ColdFire)
-@cindex system emulation (M68K)
Use the executable @file{qemu-system-m68k} to simulate a ColdFire machine.
The emulator is able to boot a uClinux kernel.
diff --git a/docs/system/target-mips.texi b/docs/system/target-mips.texi
index f722c00912a..fe12ee94c73 100644
--- a/docs/system/target-mips.texi
+++ b/docs/system/target-mips.texi
@@ -1,6 +1,5 @@
@node MIPS System emulator
@section MIPS System emulator
-@cindex system emulation (MIPS)
@menu
* recommendations_cpu_models_MIPS:: Supported CPU model configurations on MIPS hosts
@@ -126,7 +125,6 @@ MIPSnet network emulation
@node nanoMIPS System emulator
@subsection nanoMIPS System emulator
-@cindex system emulation (nanoMIPS)
Executable @file{qemu-system-mipsel} also covers simulation of
32-bit nanoMIPS system in little endian mode:
diff --git a/docs/system/target-ppc.texi b/docs/system/target-ppc.texi
index c2c254d3d23..55f98f65b12 100644
--- a/docs/system/target-ppc.texi
+++ b/docs/system/target-ppc.texi
@@ -1,6 +1,5 @@
@node PowerPC System emulator
@section PowerPC System emulator
-@cindex system emulation (PowerPC)
Use the executable @file{qemu-system-ppc} to simulate a complete 40P (PREP)
or PowerMac PowerPC system.
diff --git a/docs/system/target-sparc.texi b/docs/system/target-sparc.texi
index 7fe0aec9c39..7748001f734 100644
--- a/docs/system/target-sparc.texi
+++ b/docs/system/target-sparc.texi
@@ -1,6 +1,5 @@
@node Sparc32 System emulator
@section Sparc32 System emulator
-@cindex system emulation (Sparc32)
Use the executable @file{qemu-system-sparc} to simulate the following
Sun4m architecture machines:
diff --git a/docs/system/target-sparc64.texi b/docs/system/target-sparc64.texi
index 9e7a27de0ce..4db4ca3842b 100644
--- a/docs/system/target-sparc64.texi
+++ b/docs/system/target-sparc64.texi
@@ -1,6 +1,5 @@
@node Sparc64 System emulator
@section Sparc64 System emulator
-@cindex system emulation (Sparc64)
Use the executable @file{qemu-system-sparc64} to simulate a Sun4u
(UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic
diff --git a/docs/system/target-xtensa.texi b/docs/system/target-xtensa.texi
index 08b0b362991..40327de6fa7 100644
--- a/docs/system/target-xtensa.texi
+++ b/docs/system/target-xtensa.texi
@@ -1,6 +1,5 @@
@node Xtensa System emulator
@section Xtensa System emulator
-@cindex system emulation (Xtensa)
Two executables cover simulation of both Xtensa endian options,
@file{qemu-system-xtensa} and @file{qemu-system-xtensaeb}.
diff --git a/qemu-doc.texi b/qemu-doc.texi
index d3e743719ab..c2b9c87c645 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -62,17 +62,14 @@
QEMU is a FAST! processor emulator using dynamic translation to
achieve good emulation speed.
-@cindex operating modes
QEMU has two operating modes:
@itemize
-@cindex system emulation
@item Full system emulation. In this mode, QEMU emulates a full system (for
example a PC), including one or several processors and various
peripherals. It can be used to launch different Operating Systems
without rebooting the PC or to debug system code.
-@cindex user mode emulation
@item User mode emulation. In this mode, QEMU can launch
processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator (@url{https://www.winehq.org}) or
@@ -127,7 +124,6 @@ accelerator is required to use more than one host CPU for emulation.
@node QEMU System emulator
@chapter QEMU System emulator
-@cindex system emulation
@menu
* pcsys_quickstart:: Quick start
@@ -163,7 +159,6 @@ accelerator is required to use more than one host CPU for emulation.
@node QEMU System emulator targets
@chapter QEMU System emulator targets
-@cindex system emulation (PC)
QEMU is a generic emulator and it emulates many machines. Most of the
options are similar for all machines. Specific information about the
@@ -200,46 +195,7 @@ various targets are mentioned in the following sections.
@node Index
@appendix Index
-@menu
-* Concept Index::
-* Function Index::
-* Keystroke Index::
-* Program Index::
-* Data Type Index::
-* Variable Index::
-@end menu
-@node Concept Index
-@section Concept Index
-This is the main index. Should we combine all keywords in one index? TODO
-@printindex cp
-
-@node Function Index
-@section Function Index
-This index could be used for command line options and monitor functions.
@printindex fn
-@node Keystroke Index
-@section Keystroke Index
-
-This is a list of all keystrokes which have a special function
-in system emulation.
-
-@printindex ky
-
-@node Program Index
-@section Program Index
-@printindex pg
-
-@node Data Type Index
-@section Data Type Index
-
-This index could be used for qdev device names and options.
-
-@printindex tp
-
-@node Variable Index
-@section Variable Index
-@printindex vr
-
@bye
--
2.20.1
next prev parent reply other threads:[~2020-03-06 11:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 11:09 [PULL 00/33] docs queue Peter Maydell
2020-03-06 11:09 ` [PULL 01/33] qemu-doc: convert user-mode emulation to a separate Sphinx manual Peter Maydell
2020-03-06 11:09 ` [PULL 02/33] qemu-doc: remove target OS documentation Peter Maydell
2020-03-06 11:09 ` [PULL 03/33] texi2pod: parse @include directives outside "@c man" blocks Peter Maydell
2020-03-06 11:09 ` [PULL 04/33] qemu-doc: split CPU models doc between MIPS and x86 parts Peter Maydell
2020-03-06 11:09 ` [PULL 05/33] qemu-doc: split qemu-doc.texi in multiple files Peter Maydell
2020-03-06 11:09 ` [PULL 06/33] qemu-doc: extract common system emulator documentation from the PC section Peter Maydell
2020-03-06 11:09 ` [PULL 07/33] qemu-doc: move system requirements chapter inside " Peter Maydell
2020-03-06 11:09 ` [PULL 08/33] qemu-doc: split target sections to separate files Peter Maydell
2020-03-06 11:09 ` [PULL 09/33] qemu-doc: Remove the "CPU emulation" part of the "Implementation notes" Peter Maydell
2020-03-06 11:09 ` [PULL 10/33] qemu-doc: move qemu-tech.texi into main section Peter Maydell
2020-03-06 11:09 ` [PULL 11/33] qemu-doc: move included files to docs/system Peter Maydell
2020-03-06 11:09 ` Peter Maydell [this message]
2020-03-06 11:09 ` [PULL 13/33] docs/system: put qemu-block-drivers body in an included file Peter Maydell
2020-03-06 11:09 ` [PULL 14/33] docs: Create defs.rst.inc as a place to define substitutions Peter Maydell
2020-03-06 11:09 ` [PULL 15/33] docs/system: Convert qemu-cpu-models.texi to rST Peter Maydell
2020-03-06 11:09 ` [PULL 16/33] docs/system: Convert security.texi to rST format Peter Maydell
2020-03-06 11:09 ` [PULL 17/33] docs/system: convert managed startup to rST Peter Maydell
2020-03-06 11:09 ` [PULL 18/33] docs/system: convert the documentation of deprecated features " Peter Maydell
2020-03-06 11:09 ` [PULL 19/33] docs/system: convert Texinfo documentation " Peter Maydell
2020-03-06 11:09 ` [PULL 20/33] hmp-commands.hx: Add rST documentation fragments Peter Maydell
2020-03-06 11:09 ` [PULL 21/33] hmp-commands-info.hx: " Peter Maydell
2020-03-06 11:09 ` [PULL 22/33] doc/scripts/hxtool.py: Strip trailing ':' from DEFHEADING/ARCHHEADING Peter Maydell
2020-03-06 11:09 ` [PULL 23/33] docs: Roll semihosting option information into qemu-options.hx Peter Maydell
2020-03-06 11:09 ` [PULL 24/33] docs: Roll -prom-env and -g target-specific info " Peter Maydell
2020-03-06 11:09 ` [PULL 25/33] scripts/hxtool-conv: Archive script used in qemu-options.hx conversion Peter Maydell
2020-03-06 11:09 ` [PULL 26/33] qemu-options.hx: Add rST documentation fragments Peter Maydell
2020-03-06 11:09 ` [PULL 27/33] qemu-options.hx: Fix up the autogenerated rST Peter Maydell
2020-03-06 11:09 ` [PULL 28/33] docs: Split out sections for the manpage into .rst.inc files Peter Maydell
2020-03-06 11:09 ` [PULL 29/33] docs: Generate qemu.1 manpage with Sphinx Peter Maydell
2020-03-06 11:09 ` [PULL 30/33] ui/cocoa.m: Update documentation file and pathname Peter Maydell
2020-03-06 11:09 ` [PULL 31/33] docs: Stop building qemu-doc Peter Maydell
2020-03-06 11:09 ` [PULL 32/33] docs: Remove old texinfo sources Peter Maydell
2020-03-06 11:09 ` [PULL 33/33] *.hx: Remove all the STEXI/ETEXI blocks Peter Maydell
2020-03-06 11:37 ` [PULL 00/33] docs queue no-reply
2020-03-06 11:52 ` Peter Maydell
2020-03-06 11:55 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306110959.29461-13-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).