qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 02/33] qemu-doc: remove target OS documentation
Date: Fri,  6 Mar 2020 11:09:28 +0000	[thread overview]
Message-ID: <20200306110959.29461-3-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200306110959.29461-1-peter.maydell@linaro.org>

From: Paolo Bonzini <pbonzini@redhat.com>

This section covers OSes up to Windows 2000, and as such it is mostly
obsolete.  Zap it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-3-peter.maydell@linaro.org
Message-id: 20200226113034.6741-3-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 qemu-doc.texi | 96 ---------------------------------------------------
 1 file changed, 96 deletions(-)

diff --git a/qemu-doc.texi b/qemu-doc.texi
index 6636816b85f..e555dea4ef6 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -148,7 +148,6 @@ accelerator is required to use more than one host CPU for emulation.
 * vnc_security::       VNC security
 * network_tls::        TLS setup for network services
 * gdb_usage::          GDB usage
-* pcsys_os_specific::  Target OS specific information
 @end menu
 
 @node pcsys_introduction
@@ -1605,101 +1604,6 @@ received: "OK"
 @end example
 @end table
 
-@node pcsys_os_specific
-@section Target OS specific information
-
-@subsection Linux
-
-To have access to SVGA graphic modes under X11, use the @code{vesa} or
-the @code{cirrus} X11 driver. For optimal performances, use 16 bit
-color depth in the guest and the host OS.
-
-When using a 2.6 guest Linux kernel, you should add the option
-@code{clock=pit} on the kernel command line because the 2.6 Linux
-kernels make very strict real time clock checks by default that QEMU
-cannot simulate exactly.
-
-When using a 2.6 guest Linux kernel, verify that the 4G/4G patch is
-not activated because QEMU is slower with this patch. The QEMU
-Accelerator Module is also much slower in this case. Earlier Fedora
-Core 3 Linux kernel (< 2.6.9-1.724_FC3) were known to incorporate this
-patch by default. Newer kernels don't have it.
-
-@subsection Windows
-
-If you have a slow host, using Windows 95 is better as it gives the
-best speed. Windows 2000 is also a good choice.
-
-@subsubsection SVGA graphic modes support
-
-QEMU emulates a Cirrus Logic GD5446 Video
-card. All Windows versions starting from Windows 95 should recognize
-and use this graphic card. For optimal performances, use 16 bit color
-depth in the guest and the host OS.
-
-If you are using Windows XP as guest OS and if you want to use high
-resolution modes which the Cirrus Logic BIOS does not support (i.e. >=
-1280x1024x16), then you should use the VESA VBE virtual graphic card
-(option @option{-std-vga}).
-
-@subsubsection CPU usage reduction
-
-Windows 9x does not correctly use the CPU HLT
-instruction. The result is that it takes host CPU cycles even when
-idle. You can install the utility from
-@url{https://web.archive.org/web/20060212132151/http://www.user.cityline.ru/~maxamn/amnhltm.zip}
-to solve this problem. Note that no such tool is needed for NT, 2000 or XP.
-
-@subsubsection Windows 2000 disk full problem
-
-Windows 2000 has a bug which gives a disk full problem during its
-installation. When installing it, use the @option{-win2k-hack} QEMU
-option to enable a specific workaround. After Windows 2000 is
-installed, you no longer need this option (this option slows down the
-IDE transfers).
-
-@subsubsection Windows 2000 shutdown
-
-Windows 2000 cannot automatically shutdown in QEMU although Windows 98
-can. It comes from the fact that Windows 2000 does not automatically
-use the APM driver provided by the BIOS.
-
-In order to correct that, do the following (thanks to Struan
-Bartlett): go to the Control Panel => Add/Remove Hardware & Next =>
-Add/Troubleshoot a device => Add a new device & Next => No, select the
-hardware from a list & Next => NT Apm/Legacy Support & Next => Next
-(again) a few times. Now the driver is installed and Windows 2000 now
-correctly instructs QEMU to shutdown at the appropriate moment.
-
-@subsubsection Share a directory between Unix and Windows
-
-See @ref{sec_invocation} about the help of the option
-@option{'-netdev user,smb=...'}.
-
-@subsubsection Windows XP security problem
-
-Some releases of Windows XP install correctly but give a security
-error when booting:
-@example
-A problem is preventing Windows from accurately checking the
-license for this computer. Error code: 0x800703e6.
-@end example
-
-The workaround is to install a service pack for XP after a boot in safe
-mode. Then reboot, and the problem should go away. Since there is no
-network while in safe mode, its recommended to download the full
-installation of SP1 or SP2 and transfer that via an ISO or using the
-vvfat block device ("-hdb fat:directory_which_holds_the_SP").
-
-@subsection MS-DOS and FreeDOS
-
-@subsubsection CPU usage reduction
-
-DOS does not correctly use the CPU HLT instruction. The result is that
-it takes host CPU cycles even when idle. You can install the utility from
-@url{https://web.archive.org/web/20051222085335/http://www.vmware.com/software/dosidle210.zip}
-to solve this problem.
-
 @node QEMU System emulator for non PC targets
 @chapter QEMU System emulator for non PC targets
 
-- 
2.20.1



  parent reply	other threads:[~2020-03-06 11:11 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-06 11:09 [PULL 00/33] docs queue Peter Maydell
2020-03-06 11:09 ` [PULL 01/33] qemu-doc: convert user-mode emulation to a separate Sphinx manual Peter Maydell
2020-03-06 11:09 ` Peter Maydell [this message]
2020-03-06 11:09 ` [PULL 03/33] texi2pod: parse @include directives outside "@c man" blocks Peter Maydell
2020-03-06 11:09 ` [PULL 04/33] qemu-doc: split CPU models doc between MIPS and x86 parts Peter Maydell
2020-03-06 11:09 ` [PULL 05/33] qemu-doc: split qemu-doc.texi in multiple files Peter Maydell
2020-03-06 11:09 ` [PULL 06/33] qemu-doc: extract common system emulator documentation from the PC section Peter Maydell
2020-03-06 11:09 ` [PULL 07/33] qemu-doc: move system requirements chapter inside " Peter Maydell
2020-03-06 11:09 ` [PULL 08/33] qemu-doc: split target sections to separate files Peter Maydell
2020-03-06 11:09 ` [PULL 09/33] qemu-doc: Remove the "CPU emulation" part of the "Implementation notes" Peter Maydell
2020-03-06 11:09 ` [PULL 10/33] qemu-doc: move qemu-tech.texi into main section Peter Maydell
2020-03-06 11:09 ` [PULL 11/33] qemu-doc: move included files to docs/system Peter Maydell
2020-03-06 11:09 ` [PULL 12/33] qemu-doc: remove indices other than findex Peter Maydell
2020-03-06 11:09 ` [PULL 13/33] docs/system: put qemu-block-drivers body in an included file Peter Maydell
2020-03-06 11:09 ` [PULL 14/33] docs: Create defs.rst.inc as a place to define substitutions Peter Maydell
2020-03-06 11:09 ` [PULL 15/33] docs/system: Convert qemu-cpu-models.texi to rST Peter Maydell
2020-03-06 11:09 ` [PULL 16/33] docs/system: Convert security.texi to rST format Peter Maydell
2020-03-06 11:09 ` [PULL 17/33] docs/system: convert managed startup to rST Peter Maydell
2020-03-06 11:09 ` [PULL 18/33] docs/system: convert the documentation of deprecated features " Peter Maydell
2020-03-06 11:09 ` [PULL 19/33] docs/system: convert Texinfo documentation " Peter Maydell
2020-03-06 11:09 ` [PULL 20/33] hmp-commands.hx: Add rST documentation fragments Peter Maydell
2020-03-06 11:09 ` [PULL 21/33] hmp-commands-info.hx: " Peter Maydell
2020-03-06 11:09 ` [PULL 22/33] doc/scripts/hxtool.py: Strip trailing ':' from DEFHEADING/ARCHHEADING Peter Maydell
2020-03-06 11:09 ` [PULL 23/33] docs: Roll semihosting option information into qemu-options.hx Peter Maydell
2020-03-06 11:09 ` [PULL 24/33] docs: Roll -prom-env and -g target-specific info " Peter Maydell
2020-03-06 11:09 ` [PULL 25/33] scripts/hxtool-conv: Archive script used in qemu-options.hx conversion Peter Maydell
2020-03-06 11:09 ` [PULL 26/33] qemu-options.hx: Add rST documentation fragments Peter Maydell
2020-03-06 11:09 ` [PULL 27/33] qemu-options.hx: Fix up the autogenerated rST Peter Maydell
2020-03-06 11:09 ` [PULL 28/33] docs: Split out sections for the manpage into .rst.inc files Peter Maydell
2020-03-06 11:09 ` [PULL 29/33] docs: Generate qemu.1 manpage with Sphinx Peter Maydell
2020-03-06 11:09 ` [PULL 30/33] ui/cocoa.m: Update documentation file and pathname Peter Maydell
2020-03-06 11:09 ` [PULL 31/33] docs: Stop building qemu-doc Peter Maydell
2020-03-06 11:09 ` [PULL 32/33] docs: Remove old texinfo sources Peter Maydell
2020-03-06 11:09 ` [PULL 33/33] *.hx: Remove all the STEXI/ETEXI blocks Peter Maydell
2020-03-06 11:37 ` [PULL 00/33] docs queue no-reply
2020-03-06 11:52 ` Peter Maydell
2020-03-06 11:55 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200306110959.29461-3-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).