From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com, maz@kernel.org,
kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: peter.maydell@linaro.org, drjones@redhat.com,
andre.przywara@arm.com, thuth@redhat.com, yuzenghui@huawei.com,
alexandru.elisei@arm.com
Subject: [kvm-unit-tests PATCH v4 07/13] arm/arm64: ITS: its_enable_defaults
Date: Mon, 9 Mar 2020 11:24:14 +0100 [thread overview]
Message-ID: <20200309102420.24498-8-eric.auger@redhat.com> (raw)
In-Reply-To: <20200309102420.24498-1-eric.auger@redhat.com>
its_enable_defaults() enable LPIs at distributor level
and ITS level.
gicv3_enable_defaults must be called before.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v3 -> v4:
- use GITS_BASER_INDIRECT & GITS_BASER_VALID in its_setup_baser()
- don't parse BASERs again in its_enable_defaults
- rename its_setup_baser into its_baser_alloc_table
- All allocations moved to the init function
- squashed "arm/arm64: gicv3: Enable/Disable LPIs at re-distributor level"
into this patch
- introduce gicv3_lpi_rdist_enable and gicv3_lpi_rdist_disable
- pend and prop table bases stored as virt addresses
- move some init functions from enable() to its_init
- removed GICR_PROPBASER_IDBITS_MASK
- introduced LPI_OFFSET
- lpi_prop becomes u8 *
- gicv3_lpi_set_config/get_config became macro
- renamed gicv3_lpi_set_pending_table_bit into gicv3_lpi_set_clr_pending
v2 -> v3:
- introduce its_setup_baser in this patch
- squash "arm/arm64: ITS: Init the command queue" in this patch.
---
lib/arm/asm/gic-v3.h | 28 +++++++++++------
lib/arm/gic-v3.c | 64 ++++++++++++++++++++++----------------
lib/arm64/asm/gic-v3-its.h | 1 +
lib/arm64/gic-v3-its.c | 16 ++++++++--
4 files changed, 71 insertions(+), 38 deletions(-)
diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
index 12134ef..ea9ae8e 100644
--- a/lib/arm/asm/gic-v3.h
+++ b/lib/arm/asm/gic-v3.h
@@ -50,15 +50,16 @@
#define MPIDR_TO_SGI_AFFINITY(cluster_id, level) \
(MPIDR_AFFINITY_LEVEL(cluster_id, level) << ICC_SGI1R_AFFINITY_## level ## _SHIFT)
-#define GICR_PROPBASER_IDBITS_MASK (0x1f)
+#define GICR_PENDBASER_PTZ BIT_ULL(62)
-#define GICR_PENDBASER_PTZ BIT_ULL(62)
+#define LPI_PROP_GROUP1 (1 << 1)
+#define LPI_PROP_ENABLED (1 << 0)
+#define LPI_PROP_DEFAULT_PRIO 0xa0
+#define LPI_PROP_DEFAULT (LPI_PROP_DEFAULT_PRIO | LPI_PROP_GROUP1 | LPI_PROP_ENABLED)
-#define LPI_PROP_GROUP1 (1 << 1)
-#define LPI_PROP_ENABLED (1 << 0)
-#define LPI_PROP_DEFAULT_PRIO 0xa0
-#define LPI_PROP_DEFAULT (LPI_PROP_DEFAULT_PRIO | LPI_PROP_GROUP1 | \
- LPI_PROP_ENABLED)
+#define LPI_ID_BASE 8192
+#define LPI(lpi) ((lpi) + LPI_ID_BASE)
+#define LPI_OFFSET(intid) ((intid) - LPI_ID_BASE)
#include <asm/arch_gicv3.h>
@@ -76,7 +77,7 @@ struct gicv3_data {
void *dist_base;
void *redist_bases[GICV3_NR_REDISTS];
void *redist_base[NR_CPUS];
- void *lpi_prop;
+ u8 *lpi_prop;
void *lpi_pend[NR_CPUS];
unsigned int irq_nr;
};
@@ -96,8 +97,10 @@ extern void gicv3_ipi_send_mask(int irq, const cpumask_t *dest);
extern void gicv3_set_redist_base(size_t stride);
extern void gicv3_lpi_set_config(int n, u8 val);
extern u8 gicv3_lpi_get_config(int n);
-extern void gicv3_lpi_set_pending_table_bit(int rdist, int n, bool set);
+extern void gicv3_lpi_set_clr_pending(int rdist, int n, bool set);
extern void gicv3_lpi_alloc_tables(void);
+extern void gicv3_lpi_rdist_enable(int redist);
+extern void gicv3_lpi_rdist_disable(int redist);
static inline void gicv3_do_wait_for_rwp(void *base)
{
@@ -143,5 +146,12 @@ static inline u64 mpidr_uncompress(u32 compressed)
return mpidr;
}
+#define gicv3_lpi_set_config(intid, value) ({ \
+ gicv3_data.lpi_prop[LPI_OFFSET(intid)] = value; \
+})
+
+#define gicv3_lpi_get_config(intid) (gicv3_data.lpi_prop[LPI_OFFSET(intid)])
+
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASMARM_GIC_V3_H_ */
diff --git a/lib/arm/gic-v3.c b/lib/arm/gic-v3.c
index 949a986..a3b55b2 100644
--- a/lib/arm/gic-v3.c
+++ b/lib/arm/gic-v3.c
@@ -150,7 +150,14 @@ void gicv3_ipi_send_single(int irq, int cpu)
}
#if defined(__aarch64__)
-/* alloc_lpi_tables: Allocate LPI config and pending tables */
+
+/**
+ * alloc_lpi_tables - Allocate LPI config and pending tables
+ * and set PROPBASER (shared by all rdistributors) and per
+ * redistributor PENDBASER.
+ *
+ * gicv3_set_redist_base() must be called before
+ */
void gicv3_lpi_alloc_tables(void)
{
unsigned long n = SZ_64K >> PAGE_SHIFT;
@@ -161,13 +168,9 @@ void gicv3_lpi_alloc_tables(void)
gicv3_data.lpi_prop = alloc_pages(order);
/* ID bits = 13, ie. up to 14b LPI INTID */
- prop_val = (u64)virt_to_phys(gicv3_data.lpi_prop) | 13;
+ prop_val = (u64)(virt_to_phys(gicv3_data.lpi_prop)) | 13;
- /*
- * Allocate pending tables for each redistributor
- * and set PROPBASER and PENDBASER
- */
- for_each_present_cpu(cpu) {
+ for (cpu = 0; cpu < nr_cpus; cpu++) {
u64 pend_val;
void *ptr;
@@ -176,30 +179,14 @@ void gicv3_lpi_alloc_tables(void)
writeq(prop_val, ptr + GICR_PROPBASER);
gicv3_data.lpi_pend[cpu] = alloc_pages(order);
-
- pend_val = (u64)virt_to_phys(gicv3_data.lpi_pend[cpu]);
-
+ pend_val = (u64)(virt_to_phys(gicv3_data.lpi_pend[cpu]));
writeq(pend_val, ptr + GICR_PENDBASER);
}
}
-void gicv3_lpi_set_config(int n, u8 value)
+void gicv3_lpi_set_clr_pending(int rdist, int n, bool set)
{
- u8 *entry = (u8 *)(gicv3_data.lpi_prop + (n - 8192));
-
- *entry = value;
-}
-
-u8 gicv3_lpi_get_config(int n)
-{
- u8 *entry = (u8 *)(gicv3_data.lpi_prop + (n - 8192));
-
- return *entry;
-}
-
-void gicv3_lpi_set_pending_table_bit(int rdist, int n, bool set)
-{
- u8 *ptr = phys_to_virt((phys_addr_t)gicv3_data.lpi_pend[rdist]);
+ u8 *ptr = gicv3_data.lpi_pend[rdist];
u8 mask = 1 << (n % 8), byte;
ptr += (n / 8);
@@ -210,4 +197,29 @@ void gicv3_lpi_set_pending_table_bit(int rdist, int n, bool set)
byte &= ~mask;
*ptr = byte;
}
+
+static void gicv3_lpi_rdist_ctrl(u32 redist, bool set)
+{
+ void *ptr;
+ u64 val;
+
+ assert(redist < nr_cpus);
+
+ ptr = gicv3_data.redist_base[redist];
+ val = readl(ptr + GICR_CTLR);
+ if (set)
+ val |= GICR_CTLR_ENABLE_LPIS;
+ else
+ val &= ~GICR_CTLR_ENABLE_LPIS;
+ writel(val, ptr + GICR_CTLR);
+}
+
+void gicv3_lpi_rdist_enable(int redist)
+{
+ gicv3_lpi_rdist_ctrl(redist, true);
+}
+void gicv3_lpi_rdist_disable(int redist)
+{
+ gicv3_lpi_rdist_ctrl(redist, false);
+}
#endif /* __aarch64__ */
diff --git a/lib/arm64/asm/gic-v3-its.h b/lib/arm64/asm/gic-v3-its.h
index 331ba0e..1e95977 100644
--- a/lib/arm64/asm/gic-v3-its.h
+++ b/lib/arm64/asm/gic-v3-its.h
@@ -88,5 +88,6 @@ extern struct its_data its_data;
extern void its_parse_typer(void);
extern void its_init(void);
extern int its_baser_lookup(int i, struct its_baser *baser);
+extern void its_enable_defaults(void);
#endif /* _ASMARM64_GIC_V3_ITS_H_ */
diff --git a/lib/arm64/gic-v3-its.c b/lib/arm64/gic-v3-its.c
index 23b0d06..2f480ae 100644
--- a/lib/arm64/gic-v3-its.c
+++ b/lib/arm64/gic-v3-its.c
@@ -94,9 +94,19 @@ void its_init(void)
its_baser_alloc_table(&its_data.device_baser, SZ_64K);
its_baser_alloc_table(&its_data.coll_baser, SZ_64K);
- /* Allocate LPI config and pending tables */
- gicv3_lpi_alloc_tables();
-
its_cmd_queue_init();
}
+/* must be called after gicv3_enable_defaults */
+void its_enable_defaults(void)
+{
+ int i;
+
+ /* Allocate LPI config and pending tables */
+ gicv3_lpi_alloc_tables();
+
+ for (i = 0; i < nr_cpus; i++)
+ gicv3_lpi_rdist_enable(i);
+
+ writel(GITS_CTLR_ENABLE, its_data.base + GITS_CTLR);
+}
--
2.20.1
next prev parent reply other threads:[~2020-03-09 10:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-09 10:24 [kvm-unit-tests PATCH v4 00/13] arm/arm64: Add ITS tests Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 01/13] libcflat: Add other size defines Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 02/13] page_alloc: Introduce get_order() Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 03/13] arm/arm64: gic: Introduce setup_irq() helper Eric Auger
2020-03-09 10:56 ` Andrew Jones
2020-03-10 11:00 ` Auger Eric
2020-03-10 11:56 ` Andrew Jones
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 04/13] arm/arm64: gicv3: Add some re-distributor defines Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 05/13] arm/arm64: gicv3: Set the LPI config and pending tables Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 06/13] arm/arm64: ITS: Introspection tests Eric Auger
2020-03-09 11:19 ` Andrew Jones
2020-03-09 11:47 ` Auger Eric
2020-03-09 10:24 ` Eric Auger [this message]
2020-03-09 11:27 ` [kvm-unit-tests PATCH v4 07/13] arm/arm64: ITS: its_enable_defaults Andrew Jones
2020-03-09 11:39 ` Andrew Jones
2020-03-09 11:45 ` Auger Eric
2020-03-09 11:52 ` Andrew Jones
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 08/13] arm/arm64: ITS: Device and collection Initialization Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 09/13] arm/arm64: ITS: Commands Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 10/13] arm/arm64: ITS: INT functional tests Eric Auger
2020-03-09 11:43 ` Andrew Jones
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 11/13] arm/run: Allow Migration tests Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 12/13] arm/arm64: ITS: migration tests Eric Auger
2020-03-09 10:24 ` [kvm-unit-tests PATCH v4 13/13] arm/arm64: ITS: pending table migration test Eric Auger
2020-03-09 11:57 ` [kvm-unit-tests PATCH v4 00/13] arm/arm64: Add ITS tests Andrew Jones
2020-03-09 12:00 ` Andrew Jones
2020-03-10 10:18 ` Zenghui Yu
2020-03-10 14:56 ` Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200309102420.24498-8-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=alexandru.elisei@arm.com \
--cc=andre.przywara@arm.com \
--cc=drjones@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=maz@kernel.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).