* Re: [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
2020-03-06 12:33 [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest Cédric Le Goater
@ 2020-03-06 14:06 ` no-reply
2020-03-06 15:16 ` Greg Kurz
2020-03-10 0:46 ` David Gibson
2 siblings, 0 replies; 4+ messages in thread
From: no-reply @ 2020-03-06 14:06 UTC (permalink / raw)
To: clg; +Cc: qemu-devel, groug, qemu-ppc, clg, david
Patchew URL: https://patchew.org/QEMU/20200306123307.1348-1-clg@kaod.org/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#! /bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-mingw@fedora J=14 NETWORK=1
=== TEST SCRIPT END ===
File: "/tmp/qemu-nsis\qemu-doc.html" -> no files found.
Usage: File [/nonfatal] [/a] ([/r] [/x filespec [...]] filespec [...] |
/oname=outfile one_file_only)
Error in script "/tmp/qemu-test/src/qemu.nsi" on line 180 -- aborting creation process
make: *** [Makefile:1162: qemu-setup-4.2.50.exe] Error 1
Traceback (most recent call last):
File "./tests/docker/docker.py", line 664, in <module>
sys.exit(main())
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=e8d2f52f3055473c9f743fadda5d5437', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-8iuwr53p/src/docker-src.2020-03-06-09.03.10.19648:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2.
filter=--filter=label=com.qemu.instance.uuid=e8d2f52f3055473c9f743fadda5d5437
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-8iuwr53p/src'
make: *** [docker-run-test-mingw@fedora] Error 2
real 3m47.685s
user 0m8.708s
The full log is available at
http://patchew.org/logs/20200306123307.1348-1-clg@kaod.org/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
2020-03-06 12:33 [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest Cédric Le Goater
2020-03-06 14:06 ` no-reply
@ 2020-03-06 15:16 ` Greg Kurz
2020-03-10 0:46 ` David Gibson
2 siblings, 0 replies; 4+ messages in thread
From: Greg Kurz @ 2020-03-06 15:16 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-ppc, qemu-devel, David Gibson
On Fri, 6 Mar 2020 13:33:07 +0100
Cédric Le Goater <clg@kaod.org> wrote:
> The "ibm,xive-lisn-ranges" defines ranges of interrupt numbers that
> the guest can use to configure IPIs. It starts at 0 today but it could
> change to some other offset. Make clear which IRQ range we are
> exposing by using SPAPR_IRQ_IPI in the property definition.
>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
Reviewed-by: Greg Kurz <groug@kaod.org>
> hw/intc/spapr_xive.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c
> index 20c8155557d6..6608d7220a47 100644
> --- a/hw/intc/spapr_xive.c
> +++ b/hw/intc/spapr_xive.c
> @@ -677,8 +677,8 @@ static void spapr_xive_dt(SpaprInterruptController *intc, uint32_t nr_servers,
> uint64_t timas[2 * 2];
> /* Interrupt number ranges for the IPIs */
> uint32_t lisn_ranges[] = {
> - cpu_to_be32(0),
> - cpu_to_be32(nr_servers),
> + cpu_to_be32(SPAPR_IRQ_IPI),
> + cpu_to_be32(SPAPR_IRQ_IPI + nr_servers),
> };
> /*
> * EQ size - the sizes of pages supported by the system 4K, 64K,
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
2020-03-06 12:33 [PATCH] spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest Cédric Le Goater
2020-03-06 14:06 ` no-reply
2020-03-06 15:16 ` Greg Kurz
@ 2020-03-10 0:46 ` David Gibson
2 siblings, 0 replies; 4+ messages in thread
From: David Gibson @ 2020-03-10 0:46 UTC (permalink / raw)
To: Cédric Le Goater; +Cc: qemu-ppc, Greg Kurz, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 1361 bytes --]
On Fri, Mar 06, 2020 at 01:33:07PM +0100, Cédric Le Goater wrote:
> The "ibm,xive-lisn-ranges" defines ranges of interrupt numbers that
> the guest can use to configure IPIs. It starts at 0 today but it could
> change to some other offset. Make clear which IRQ range we are
> exposing by using SPAPR_IRQ_IPI in the property definition.
>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Applied to ppc-for-5.0, thanks.,
> ---
> hw/intc/spapr_xive.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c
> index 20c8155557d6..6608d7220a47 100644
> --- a/hw/intc/spapr_xive.c
> +++ b/hw/intc/spapr_xive.c
> @@ -677,8 +677,8 @@ static void spapr_xive_dt(SpaprInterruptController *intc, uint32_t nr_servers,
> uint64_t timas[2 * 2];
> /* Interrupt number ranges for the IPIs */
> uint32_t lisn_ranges[] = {
> - cpu_to_be32(0),
> - cpu_to_be32(nr_servers),
> + cpu_to_be32(SPAPR_IRQ_IPI),
> + cpu_to_be32(SPAPR_IRQ_IPI + nr_servers),
> };
> /*
> * EQ size - the sizes of pages supported by the system 4K, 64K,
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread