From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org, alex.bennee@linaro.org
Subject: [PATCH v6 07/42] target/arm: Add MTE system registers
Date: Thu, 12 Mar 2020 12:41:44 -0700 [thread overview]
Message-ID: <20200312194219.24406-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200312194219.24406-1-richard.henderson@linaro.org>
This is TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3,
RGSR_EL1, GCR_EL1, GMID_EL1, and PSTATE.TCO.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Add GMID; add access_mte.
v4: Define only TCO at mte_insn_reg.
v6: Define RAZ/WI version of TCO at mte_insn_reg;
honor TID5 for GMID_EL1; fix TFS crn/crm; recalc hflags after TCO.
---
target/arm/cpu.h | 4 ++
target/arm/internals.h | 6 +++
target/arm/helper.c | 94 ++++++++++++++++++++++++++++++++++++++
target/arm/translate-a64.c | 21 +++++++++
4 files changed, 125 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a77b0d97ac..25351abd15 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -492,6 +492,9 @@ typedef struct CPUARMState {
uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
uint64_t vpidr_el2; /* Virtualization Processor ID Register */
uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
+ uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */
+ uint64_t gcr_el1;
+ uint64_t rgsr_el1;
} cp15;
struct {
@@ -1259,6 +1262,7 @@ void pmu_init(ARMCPU *cpu);
#define PSTATE_SS (1U << 21)
#define PSTATE_PAN (1U << 22)
#define PSTATE_UAO (1U << 23)
+#define PSTATE_TCO (1U << 25)
#define PSTATE_V (1U << 28)
#define PSTATE_C (1U << 29)
#define PSTATE_Z (1U << 30)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index a833e3941d..0591f30526 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -1233,4 +1233,10 @@ void arm_log_exception(int idx);
#endif /* !CONFIG_USER_ONLY */
+/*
+ * The log2 of the words in the tag block, for GMID_EL1.BS.
+ * The is the maximum, 256 bytes, which manipulates 64-bits of tags.
+ */
+#define GMID_EL1_BS 6
+
#endif
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b9267ddbc2..b47209be64 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5869,6 +5869,9 @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
{ K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0),
"ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve },
+ { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0),
+ "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte },
+
/* TODO: ARMv8.2-SPE -- PMSCR_EL2 */
/* TODO: ARMv8.4-Trace -- TRFCR_EL2 */
};
@@ -6840,6 +6843,86 @@ static const ARMCPRegInfo dcpodp_reg[] = {
};
#endif /*CONFIG_USER_ONLY*/
+static CPAccessResult access_aa64_tid5(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID5)) {
+ return CP_ACCESS_TRAP_EL2;
+ }
+
+ return CP_ACCESS_OK;
+}
+
+static CPAccessResult access_mte(CPUARMState *env, const ARMCPRegInfo *ri,
+ bool isread)
+{
+ int el = arm_current_el(env);
+
+ if (el < 2 &&
+ arm_feature(env, ARM_FEATURE_EL2) &&
+ !(arm_hcr_el2_eff(env) & HCR_ATA)) {
+ return CP_ACCESS_TRAP_EL2;
+ }
+ if (el < 3 &&
+ arm_feature(env, ARM_FEATURE_EL3) &&
+ !(env->cp15.scr_el3 & SCR_ATA)) {
+ return CP_ACCESS_TRAP_EL3;
+ }
+ return CP_ACCESS_OK;
+}
+
+static uint64_t tco_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ return env->pstate & PSTATE_TCO;
+}
+
+static void tco_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val)
+{
+ env->pstate = (env->pstate & ~PSTATE_TCO) | (val & PSTATE_TCO);
+}
+
+static const ARMCPRegInfo mte_reginfo[] = {
+ { .name = "TFSRE0_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 1,
+ .access = PL1_RW, .accessfn = access_mte,
+ .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[0]) },
+ { .name = "TFSR_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 0,
+ .access = PL1_RW, .accessfn = access_mte,
+ .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[1]) },
+ { .name = "TFSR_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 6, .opc2 = 0,
+ .access = PL2_RW, .accessfn = access_mte,
+ .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[2]) },
+ { .name = "TFSR_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 6, .opc2 = 0,
+ .access = PL3_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[3]) },
+ { .name = "RGSR_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 5,
+ .access = PL1_RW, .accessfn = access_mte,
+ .fieldoffset = offsetof(CPUARMState, cp15.rgsr_el1) },
+ { .name = "GCR_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6,
+ .access = PL1_RW, .accessfn = access_mte,
+ .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) },
+ { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4,
+ .access = PL1_R, .accessfn = access_aa64_tid5,
+ .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS },
+ { .name = "TCO", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7,
+ .type = ARM_CP_NO_RAW,
+ .access = PL0_RW, .readfn = tco_read, .writefn = tco_write },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo mte_tco_ro_reginfo[] = {
+ { .name = "TCO", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7,
+ .type = ARM_CP_CONST, .access = PL0_RW, },
+ REGINFO_SENTINEL
+};
#endif
static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -7957,6 +8040,17 @@ void register_cp_regs_for_features(ARMCPU *cpu)
}
}
#endif /*CONFIG_USER_ONLY*/
+
+ /*
+ * If full MTE is enabled, add all of the system registers.
+ * If only "instructions available at EL0" are enabled,
+ * then define only a RAZ/WI version of PSTATE.TCO.
+ */
+ if (cpu_isar_feature(aa64_mte, cpu)) {
+ define_arm_cp_regs(cpu, mte_reginfo);
+ } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) {
+ define_arm_cp_regs(cpu, mte_tco_ro_reginfo);
+ }
#endif
if (cpu_isar_feature(any_predinv, cpu)) {
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 943d6034de..528f608408 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -1664,6 +1664,27 @@ static void handle_msr_i(DisasContext *s, uint32_t insn,
s->base.is_jmp = DISAS_UPDATE_EXIT;
break;
+ case 0x1c: /* TCO */
+ if (dc_isar_feature(aa64_mte, s)) {
+ /* Full MTE is enabled -- set the TCO bit as directed. */
+ if (crm & 1) {
+ set_pstate_bits(PSTATE_TCO);
+ } else {
+ clear_pstate_bits(PSTATE_TCO);
+ }
+ t1 = tcg_const_i32(s->current_el);
+ gen_helper_rebuild_hflags_a64(cpu_env, t1);
+ tcg_temp_free_i32(t1);
+ /* Many factors, including TCO, go into MTE_ACTIVE. */
+ s->base.is_jmp = DISAS_UPDATE_NOCHAIN;
+ } else if (dc_isar_feature(aa64_mte_insn_reg, s)) {
+ /* Only "instructions accessible at EL0" -- PSTATE.TCO is WI. */
+ s->base.is_jmp = DISAS_NEXT;
+ } else {
+ goto do_unallocated;
+ }
+ break;
+
default:
do_unallocated:
unallocated_encoding(s);
--
2.20.1
next prev parent reply other threads:[~2020-03-12 19:47 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 19:41 [PATCH v6 00/42] target/arm: Implement ARMv8.5-MemTag, system mode Richard Henderson
2020-03-12 19:41 ` [PATCH v6 01/42] target/arm: Add isar tests for mte Richard Henderson
2020-03-12 19:41 ` [PATCH v6 02/42] target/arm: Improve masking of SCR RES0 bits Richard Henderson
2020-03-12 19:41 ` [PATCH v6 03/42] target/arm: Add support for MTE to SCTLR_ELx Richard Henderson
2020-03-12 19:41 ` [PATCH v6 04/42] target/arm: Add support for MTE to HCR_EL2 and SCR_EL3 Richard Henderson
2020-03-12 19:41 ` [PATCH v6 05/42] target/arm: Rename DISAS_UPDATE to DISAS_UPDATE_EXIT Richard Henderson
2020-03-12 19:41 ` [PATCH v6 06/42] target/arm: Add DISAS_UPDATE_NOCHAIN Richard Henderson
2020-03-12 19:41 ` Richard Henderson [this message]
2020-03-12 19:41 ` [PATCH v6 08/42] target/arm: Add MTE bits to tb_flags Richard Henderson
2020-03-12 19:41 ` [PATCH v6 09/42] target/arm: Implement the IRG instruction Richard Henderson
2020-03-12 19:41 ` [PATCH v6 10/42] target/arm: Implement the ADDG, SUBG instructions Richard Henderson
2020-03-12 19:41 ` [PATCH v6 11/42] target/arm: Implement the GMI instruction Richard Henderson
2020-03-12 19:41 ` [PATCH v6 12/42] target/arm: Implement the SUBP instruction Richard Henderson
2020-03-12 19:41 ` [PATCH v6 13/42] target/arm: Define arm_cpu_do_unaligned_access for user-only Richard Henderson
2020-03-12 19:41 ` [PATCH v6 14/42] target/arm: Add helper_probe_access Richard Henderson
2020-03-12 19:41 ` [PATCH v6 15/42] target/arm: Implement LDG, STG, ST2G instructions Richard Henderson
2020-03-12 19:41 ` [PATCH v6 16/42] target/arm: Implement the STGP instruction Richard Henderson
2020-03-12 19:41 ` [PATCH v6 17/42] target/arm: Restrict the values of DCZID.BS under TCG Richard Henderson
2020-03-12 19:41 ` [PATCH v6 18/42] target/arm: Simplify DC_ZVA Richard Henderson
2020-03-12 19:41 ` [PATCH v6 19/42] target/arm: Implement the LDGM, STGM, STZGM instructions Richard Henderson
2020-03-12 19:41 ` [PATCH v6 20/42] target/arm: Implement the access tag cache flushes Richard Henderson
2020-03-12 19:41 ` [PATCH v6 21/42] target/arm: Move regime_el to internals.h Richard Henderson
2020-03-12 19:41 ` [PATCH v6 22/42] target/arm: Move regime_tcr " Richard Henderson
2020-03-12 19:42 ` [PATCH v6 23/42] target/arm: Add gen_mte_check1 Richard Henderson
2020-03-12 19:42 ` [PATCH v6 24/42] target/arm: Add gen_mte_checkN Richard Henderson
2020-03-12 19:42 ` [PATCH v6 25/42] target/arm: Implement helper_mte_check1 Richard Henderson
2020-03-12 19:42 ` [PATCH v6 26/42] target/arm: Implement helper_mte_checkN Richard Henderson
2020-03-12 19:42 ` [PATCH v6 27/42] target/arm: Add helper_mte_check_zva Richard Henderson
2020-03-12 19:42 ` [PATCH v6 28/42] target/arm: Use mte_checkN for sve unpredicated loads Richard Henderson
2020-03-12 19:42 ` [PATCH v6 29/42] target/arm: Use mte_checkN for sve unpredicated stores Richard Henderson
2020-03-12 19:42 ` [PATCH v6 30/42] target/arm: Use mte_check1 for sve LD1R Richard Henderson
2020-03-12 19:42 ` [PATCH v6 31/42] target/arm: Add mte helpers for sve scalar + int loads Richard Henderson
2020-03-12 19:42 ` [PATCH v6 32/42] target/arm: Add mte helpers for sve scalar + int stores Richard Henderson
2020-03-12 19:42 ` [PATCH v6 33/42] target/arm: Add mte helpers for sve scalar + int ff/nf loads Richard Henderson
2020-03-12 19:42 ` [PATCH v6 34/42] target/arm: Handle TBI for sve scalar + int memory ops Richard Henderson
2020-03-12 19:42 ` [PATCH v6 35/42] target/arm: Add mte helpers for sve scatter/gather " Richard Henderson
2020-03-12 19:42 ` [PATCH v6 36/42] target/arm: Complete TBI clearing for user-only for SVE Richard Henderson
2020-03-12 19:42 ` [PATCH v6 37/42] target/arm: Implement data cache set allocation tags Richard Henderson
2020-03-12 19:42 ` [PATCH v6 38/42] target/arm: Set PSTATE.TCO on exception entry Richard Henderson
2020-03-12 19:42 ` [PATCH v6 39/42] target/arm: Enable MTE Richard Henderson
2020-03-12 19:42 ` [PATCH v6 40/42] target/arm: Cache the Tagged bit for a page in MemTxAttrs Richard Henderson
2020-03-12 19:42 ` [PATCH v6 41/42] target/arm: Create tagged ram when MTE is enabled Richard Henderson
2020-03-12 19:42 ` [PATCH v6 42/42] target/arm: Add allocation tag storage for system mode Richard Henderson
2020-05-18 14:46 ` [PATCH v6 00/42] target/arm: Implement ARMv8.5-MemTag, " Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312194219.24406-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).