[PULL 2/4] usb-serial: chunk data to wMaxPacketSize

[Gerd Hoffmann <kraxel@redhat.com>]

From: Jason Andryuk <jandryuk@gmail.com>

usb-serial has issues with xHCI controllers where data is lost in the
VM.  Inspecting the URBs in the guest, EHCI starts every 64 byte boundary
(wMaxPacketSize) with a header.  EHCI hands packets into
usb_serial_token_in() with size 64, so these cannot cross the 64 byte
boundary.  The xHCI controller has packets of 512 bytes and the usb-serial
will just write through the 64 byte boundary.  In the guest, this means
data bytes are interpreted as header, so data bytes don't make it out
the serial interface.

Re-work usb_serial_token_in to chunk data into 64 byte units - 2 byte
header and 62 bytes data.  The Linux driver reads wMaxPacketSize to find
the chunk size, so we match that.

Real hardware was observed to pass in 512 byte URBs (496 bytes data +
8 * 2 byte headers).  Since usb-serial only buffers 384 bytes of data,
usb-serial will pass in 6 64 byte blocks and 1 12 byte partial block for
462 bytes max.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20200316174610.115820-3-jandryuk@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb/dev-serial.c | 47 ++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/hw/usb/dev-serial.c b/hw/usb/dev-serial.c
index d807ce577110..ec091b6a366c 100644
--- a/hw/usb/dev-serial.c
+++ b/hw/usb/dev-serial.c
@@ -360,15 +360,16 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
 
 static void usb_serial_token_in(USBSerialState *s, USBPacket *p)
 {
-    int first_len, len;
+    const int max_packet_size = desc_iface0.eps[0].wMaxPacketSize;
+    int packet_len;
     uint8_t header[2];
 
-    first_len = RECV_BUF - s->recv_ptr;
-    len = p->iov.size;
-    if (len <= 2) {
+    packet_len = p->iov.size;
+    if (packet_len <= 2) {
         p->status = USB_RET_NAK;
         return;
     }
+
     header[0] = usb_get_modem_lines(s) | 1;
     /* We do not have the uart details */
     /* handle serial break */
@@ -380,24 +381,34 @@ static void usb_serial_token_in(USBSerialState *s, USBPacket *p)
     } else {
         header[1] = 0;
     }
-    len -= 2;
-    if (len > s->recv_used) {
-        len = s->recv_used;
-    }
-    if (!len) {
+
+    if (!s->recv_used) {
         p->status = USB_RET_NAK;
         return;
     }
-    if (first_len > len) {
-        first_len = len;
+
+    while (s->recv_used && packet_len > 2) {
+        int first_len, len;
+
+        len = MIN(packet_len, max_packet_size);
+        len -= 2;
+        if (len > s->recv_used) {
+            len = s->recv_used;
+        }
+
+        first_len = RECV_BUF - s->recv_ptr;
+        if (first_len > len) {
+            first_len = len;
+        }
+        usb_packet_copy(p, header, 2);
+        usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);
+        if (len > first_len) {
+            usb_packet_copy(p, s->recv_buf, len - first_len);
+        }
+        s->recv_used -= len;
+        s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;
+        packet_len -= len + 2;
     }
-    usb_packet_copy(p, header, 2);
-    usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);
-    if (len > first_len) {
-        usb_packet_copy(p, s->recv_buf, len - first_len);
-    }
-    s->recv_used -= len;
-    s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;
 
     return;
 }
-- 
2.18.2