qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	qemu-devel@nongnu.org, "Laurent Vivier" <laurent@vivier.eu>
Subject: [PULL 12/28] target/m68k: use gdb_get_reg helpers
Date: Tue, 17 Mar 2020 17:50:37 +0000	[thread overview]
Message-ID: <20200317175053.5278-13-alex.bennee@linaro.org> (raw)
In-Reply-To: <20200317175053.5278-1-alex.bennee@linaro.org>

This is cleaner than poking memory directly and will make later
clean-ups easier.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-13-alex.bennee@linaro.org>

diff --git a/target/m68k/helper.c b/target/m68k/helper.c
index baf7729af00..c23b70f854d 100644
--- a/target/m68k/helper.c
+++ b/target/m68k/helper.c
@@ -72,19 +72,15 @@ static int cf_fpu_gdb_get_reg(CPUM68KState *env, uint8_t *mem_buf, int n)
 {
     if (n < 8) {
         float_status s;
-        stfq_p(mem_buf, floatx80_to_float64(env->fregs[n].d, &s));
-        return 8;
+        return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s));
     }
     switch (n) {
     case 8: /* fpcontrol */
-        stl_be_p(mem_buf, env->fpcr);
-        return 4;
+        return gdb_get_reg32(mem_buf, env->fpcr);
     case 9: /* fpstatus */
-        stl_be_p(mem_buf, env->fpsr);
-        return 4;
+        return gdb_get_reg32(mem_buf, env->fpsr);
     case 10: /* fpiar, not implemented */
-        memset(mem_buf, 0, 4);
-        return 4;
+        return gdb_get_reg32(mem_buf, 0);
     }
     return 0;
 }
@@ -112,21 +108,18 @@ static int cf_fpu_gdb_set_reg(CPUM68KState *env, uint8_t *mem_buf, int n)
 static int m68k_fpu_gdb_get_reg(CPUM68KState *env, uint8_t *mem_buf, int n)
 {
     if (n < 8) {
-        stw_be_p(mem_buf, env->fregs[n].l.upper);
-        memset(mem_buf + 2, 0, 2);
-        stq_be_p(mem_buf + 4, env->fregs[n].l.lower);
-        return 12;
+        int len = gdb_get_reg16(mem_buf, env->fregs[n].l.upper);
+        len += gdb_get_reg16(mem_buf + len, 0);
+        len += gdb_get_reg64(mem_buf + len, env->fregs[n].l.lower);
+        return len;
     }
     switch (n) {
     case 8: /* fpcontrol */
-        stl_be_p(mem_buf, env->fpcr);
-        return 4;
+        return gdb_get_reg32(mem_buf, env->fpcr);
     case 9: /* fpstatus */
-        stl_be_p(mem_buf, env->fpsr);
-        return 4;
+        return gdb_get_reg32(mem_buf, env->fpsr);
     case 10: /* fpiar, not implemented */
-        memset(mem_buf, 0, 4);
-        return 4;
+        return gdb_get_reg32(mem_buf, 0);
     }
     return 0;
 }
-- 
2.20.1



  parent reply	other threads:[~2020-03-17 17:56 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-17 17:50 [PULL 00/28 for 5.0] testing and gdbstub updates Alex Bennée
2020-03-17 17:50 ` [PULL 01/28] tests/docker: Install tools to cross-debug and build Linux kernels Alex Bennée
2020-03-17 17:50 ` [PULL 02/28] tests/docker: Update VirGL git repository URL Alex Bennée
2020-03-17 17:50 ` [PULL 03/28] tests/docker: Remove obsolete VirGL --with-glx configure option Alex Bennée
2020-03-17 17:50 ` [PULL 04/28] tests/docker: Update VirGL to v0.8.0 Alex Bennée
2020-03-17 17:50 ` [PULL 05/28] travis.yml: Set G_MESSAGES_DEBUG do report GLib errors Alex Bennée
2020-03-17 17:50 ` [PULL 06/28] gdbstub: make GDBState static and have common init function Alex Bennée
2020-03-17 17:50 ` [PULL 07/28] gdbstub: stop passing GDBState * around and use global Alex Bennée
2020-03-17 17:50 ` [PULL 08/28] gdbstub: move str_buf to GDBState and use GString Alex Bennée
2020-03-17 17:50 ` [PULL 09/28] gdbstub: move mem_buf to GDBState and use GByteArray Alex Bennée
2020-03-17 17:50 ` [PULL 10/28] gdbstub: add helper for 128 bit registers Alex Bennée
2020-03-17 17:50 ` [PULL 11/28] target/arm: use gdb_get_reg helpers Alex Bennée
2020-03-17 17:50 ` Alex Bennée [this message]
2020-03-17 17:50 ` [PULL 13/28] target/i386: " Alex Bennée
2020-03-17 17:50 ` [PULL 14/28] gdbstub: extend GByteArray to read register helpers Alex Bennée
2020-03-17 17:50 ` [PULL 15/28] target/arm: prepare for multiple dynamic XMLs Alex Bennée
2020-03-17 17:50 ` [PULL 16/28] target/arm: explicitly encode regnum in our XML Alex Bennée
2020-03-17 17:50 ` [PULL 17/28] target/arm: default SVE length to 64 bytes for linux-user Alex Bennée
2020-03-17 17:50 ` [PULL 18/28] target/arm: generate xml description of our SVE registers Alex Bennée
2020-03-17 17:50 ` [PULL 19/28] target/arm: don't bother with id_aa64pfr0_read for USER_ONLY Alex Bennée
2020-03-17 17:50 ` [PULL 20/28] tests/tcg/aarch64: userspace system register test Alex Bennée
2020-03-17 17:50 ` [PULL 21/28] configure: allow user to specify what gdb to use Alex Bennée
2020-03-17 17:50 ` [PULL 22/28] tests/guest-debug: add a simple test runner Alex Bennée
2020-03-17 17:50 ` [PULL 23/28] tests/tcg/aarch64: add a gdbstub testcase for SVE registers Alex Bennée
2020-03-17 17:50 ` [PULL 24/28] tests/tcg/aarch64: add SVE iotcl test Alex Bennée
2020-03-17 17:50 ` [PULL 25/28] tests/tcg/aarch64: add test-sve-ioctl guest-debug test Alex Bennée
2020-03-17 17:50 ` [PULL 26/28] gdbstub: change GDBState.last_packet to GByteArray Alex Bennée
2020-03-17 17:50 ` [PULL 27/28] gdbstub: do not split gdb_monitor_write payload Alex Bennée
2020-03-17 17:50 ` [PULL 28/28] gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb Alex Bennée
2020-03-18 22:15 ` [PULL 00/28 for 5.0] testing and gdbstub updates Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200317175053.5278-13-alex.bennee@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=laurent@vivier.eu \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).