From: "Alex Bennée" <alex.bennee@linaro.org>
To: peter.maydell@linaro.org
Cc: "Eduardo Habkost" <ehabkost@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
qemu-devel@nongnu.org, "Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Richard Henderson" <rth@twiddle.net>
Subject: [PULL 13/28] target/i386: use gdb_get_reg helpers
Date: Tue, 17 Mar 2020 17:50:38 +0000 [thread overview]
Message-ID: <20200317175053.5278-14-alex.bennee@linaro.org> (raw)
In-Reply-To: <20200317175053.5278-1-alex.bennee@linaro.org>
This is cleaner than poking memory directly and will make later
clean-ups easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-14-alex.bennee@linaro.org>
diff --git a/target/i386/gdbstub.c b/target/i386/gdbstub.c
index 572ead641ca..e4d8cb66c00 100644
--- a/target/i386/gdbstub.c
+++ b/target/i386/gdbstub.c
@@ -98,26 +98,22 @@ int x86_cpu_gdb_read_register(CPUState *cs, uint8_t *mem_buf, int n)
return gdb_get_reg64(mem_buf,
env->regs[gpr_map[n]] & 0xffffffffUL);
} else {
- memset(mem_buf, 0, sizeof(target_ulong));
- return sizeof(target_ulong);
+ return gdb_get_regl(mem_buf, 0);
}
} else {
return gdb_get_reg32(mem_buf, env->regs[gpr_map32[n]]);
}
} else if (n >= IDX_FP_REGS && n < IDX_FP_REGS + 8) {
-#ifdef USE_X86LDOUBLE
- /* FIXME: byteswap float values - after fixing fpregs layout. */
- memcpy(mem_buf, &env->fpregs[n - IDX_FP_REGS], 10);
-#else
- memset(mem_buf, 0, 10);
-#endif
- return 10;
+ floatx80 *fp = (floatx80 *) &env->fpregs[n - IDX_FP_REGS];
+ int len = gdb_get_reg64(mem_buf, cpu_to_le64(fp->low));
+ len += gdb_get_reg16(mem_buf + len, cpu_to_le16(fp->high));
+ return len;
} else if (n >= IDX_XMM_REGS && n < IDX_XMM_REGS + CPU_NB_REGS) {
n -= IDX_XMM_REGS;
if (n < CPU_NB_REGS32 || TARGET_LONG_BITS == 64) {
- stq_p(mem_buf, env->xmm_regs[n].ZMM_Q(0));
- stq_p(mem_buf + 8, env->xmm_regs[n].ZMM_Q(1));
- return 16;
+ return gdb_get_reg128(mem_buf,
+ env->xmm_regs[n].ZMM_Q(0),
+ env->xmm_regs[n].ZMM_Q(1));
}
} else {
switch (n) {
@@ -290,10 +286,9 @@ int x86_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
return 4;
}
} else if (n >= IDX_FP_REGS && n < IDX_FP_REGS + 8) {
-#ifdef USE_X86LDOUBLE
- /* FIXME: byteswap float values - after fixing fpregs layout. */
- memcpy(&env->fpregs[n - IDX_FP_REGS], mem_buf, 10);
-#endif
+ floatx80 *fp = (floatx80 *) &env->fpregs[n - IDX_FP_REGS];
+ fp->low = le64_to_cpu(* (uint64_t *) mem_buf);
+ fp->high = le16_to_cpu(* (uint16_t *) (mem_buf + 8));
return 10;
} else if (n >= IDX_XMM_REGS && n < IDX_XMM_REGS + CPU_NB_REGS) {
n -= IDX_XMM_REGS;
--
2.20.1
next prev parent reply other threads:[~2020-03-17 18:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 17:50 [PULL 00/28 for 5.0] testing and gdbstub updates Alex Bennée
2020-03-17 17:50 ` [PULL 01/28] tests/docker: Install tools to cross-debug and build Linux kernels Alex Bennée
2020-03-17 17:50 ` [PULL 02/28] tests/docker: Update VirGL git repository URL Alex Bennée
2020-03-17 17:50 ` [PULL 03/28] tests/docker: Remove obsolete VirGL --with-glx configure option Alex Bennée
2020-03-17 17:50 ` [PULL 04/28] tests/docker: Update VirGL to v0.8.0 Alex Bennée
2020-03-17 17:50 ` [PULL 05/28] travis.yml: Set G_MESSAGES_DEBUG do report GLib errors Alex Bennée
2020-03-17 17:50 ` [PULL 06/28] gdbstub: make GDBState static and have common init function Alex Bennée
2020-03-17 17:50 ` [PULL 07/28] gdbstub: stop passing GDBState * around and use global Alex Bennée
2020-03-17 17:50 ` [PULL 08/28] gdbstub: move str_buf to GDBState and use GString Alex Bennée
2020-03-17 17:50 ` [PULL 09/28] gdbstub: move mem_buf to GDBState and use GByteArray Alex Bennée
2020-03-17 17:50 ` [PULL 10/28] gdbstub: add helper for 128 bit registers Alex Bennée
2020-03-17 17:50 ` [PULL 11/28] target/arm: use gdb_get_reg helpers Alex Bennée
2020-03-17 17:50 ` [PULL 12/28] target/m68k: " Alex Bennée
2020-03-17 17:50 ` Alex Bennée [this message]
2020-03-17 17:50 ` [PULL 14/28] gdbstub: extend GByteArray to read register helpers Alex Bennée
2020-03-17 17:50 ` [PULL 15/28] target/arm: prepare for multiple dynamic XMLs Alex Bennée
2020-03-17 17:50 ` [PULL 16/28] target/arm: explicitly encode regnum in our XML Alex Bennée
2020-03-17 17:50 ` [PULL 17/28] target/arm: default SVE length to 64 bytes for linux-user Alex Bennée
2020-03-17 17:50 ` [PULL 18/28] target/arm: generate xml description of our SVE registers Alex Bennée
2020-03-17 17:50 ` [PULL 19/28] target/arm: don't bother with id_aa64pfr0_read for USER_ONLY Alex Bennée
2020-03-17 17:50 ` [PULL 20/28] tests/tcg/aarch64: userspace system register test Alex Bennée
2020-03-17 17:50 ` [PULL 21/28] configure: allow user to specify what gdb to use Alex Bennée
2020-03-17 17:50 ` [PULL 22/28] tests/guest-debug: add a simple test runner Alex Bennée
2020-03-17 17:50 ` [PULL 23/28] tests/tcg/aarch64: add a gdbstub testcase for SVE registers Alex Bennée
2020-03-17 17:50 ` [PULL 24/28] tests/tcg/aarch64: add SVE iotcl test Alex Bennée
2020-03-17 17:50 ` [PULL 25/28] tests/tcg/aarch64: add test-sve-ioctl guest-debug test Alex Bennée
2020-03-17 17:50 ` [PULL 26/28] gdbstub: change GDBState.last_packet to GByteArray Alex Bennée
2020-03-17 17:50 ` [PULL 27/28] gdbstub: do not split gdb_monitor_write payload Alex Bennée
2020-03-17 17:50 ` [PULL 28/28] gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb Alex Bennée
2020-03-18 22:15 ` [PULL 00/28 for 5.0] testing and gdbstub updates Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200317175053.5278-14-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=ehabkost@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).