[PULL 2/2] hw/ide/sii3112: Use qdev gpio rather than qemu_allocate_irqs()

[John Snow <jsnow@redhat.com>]

From: Peter Maydell <peter.maydell@linaro.org>

Coverity points out (CID 1421984) that we are leaking the
memory returned by qemu_allocate_irqs(). We can avoid this
leak by switching to using qdev_init_gpio_in(); the base
class finalize will free the irqs that this allocates under
the hood.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200323151715.29454-1-peter.maydell@linaro.org
[Maintainer edit: replace `DEVICE(dev)` by `ds` --js]
Signed-off-by: John Snow <jsnow@redhat.com>
---
 hw/ide/sii3112.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/ide/sii3112.c b/hw/ide/sii3112.c
index 06605d7af2..d69079c3d9 100644
--- a/hw/ide/sii3112.c
+++ b/hw/ide/sii3112.c
@@ -251,8 +251,8 @@ static void sii3112_pci_realize(PCIDevice *dev, Error **errp)
 {
     SiI3112PCIState *d = SII3112_PCI(dev);
     PCIIDEState *s = PCI_IDE(dev);
+    DeviceState *ds = DEVICE(dev);
     MemoryRegion *mr;
-    qemu_irq *irq;
     int i;
 
     pci_config_set_interrupt_pin(dev->config, 1);
@@ -280,10 +280,10 @@ static void sii3112_pci_realize(PCIDevice *dev, Error **errp)
     memory_region_init_alias(mr, OBJECT(d), "sii3112.bar4", &d->mmio, 0, 16);
     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, mr);
 
-    irq = qemu_allocate_irqs(sii3112_set_irq, d, 2);
+    qdev_init_gpio_in(ds, sii3112_set_irq, 2);
     for (i = 0; i < 2; i++) {
-        ide_bus_new(&s->bus[i], sizeof(s->bus[i]), DEVICE(dev), i, 1);
-        ide_init2(&s->bus[i], irq[i]);
+        ide_bus_new(&s->bus[i], sizeof(s->bus[i]), ds, i, 1);
+        ide_init2(&s->bus[i], qdev_get_gpio_in(ds, i));
 
         bmdma_init(&s->bus[i], &s->bmdma[i], s);
         s->bmdma[i].bus = &s->bus[i];
-- 
2.21.1