From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH v3 00/18] target/arm: sve load/store improvements
Date: Tue, 21 Apr 2020 21:32:51 -0700 [thread overview]
Message-ID: <20200422043309.18430-1-richard.henderson@linaro.org> (raw)
Because there was a separate v2 of one of the patches,
avoid confusion and call the whole thing v3.
The goal here is to support MTE, but there's some cleanup to do.
Technically, we have sufficient interfaces in cputlb.c now, but it
requires multiple tlb lookups on different interfaces to do so.
Adding probe_access_flags() allows probing the tlb and getting out
some of the flags buried in the tlb comparator, such as TLB_MMIO
and TLB_WATCHPOINT. In addition, we get no-fault semantics,
which we don't have via probe_acccess().
Looking forward to MTE, we can examine the Tagged bit on a per-page
basis and avoid dozens of mte_check calls that must be Unchecked.
That comes later, in a new version of the MTE patch set, but I do
add comments for where the checks should be added.
Version 3 drops cpu_probe_watchpoint, because while adding new
documentation I found we already had cpu_watchpoint_address_matches
which could do the job.
r~
Richard Henderson (18):
exec: Add block comments for watchpoint routines
exec: Fix cpu_watchpoint_address_matches address length
accel/tcg: Add block comment for probe_access
accel/tcg: Add probe_access_flags
accel/tcg: Add endian-specific cpu_{ld,st}* operations
target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn
target/arm: Drop manual handling of set/clear_helper_retaddr
target/arm: Add sve infrastructure for page lookup
target/arm: Adjust interface of sve_ld1_host_fn
target/arm: Use SVEContLdSt in sve_ld1_r
target/arm: Handle watchpoints in sve_ld1_r
target/arm: Use SVEContLdSt for multi-register contiguous loads
target/arm: Update contiguous first-fault and no-fault loads
target/arm: Use SVEContLdSt for contiguous stores
target/arm: Reuse sve_probe_page for gather first-fault loads
target/arm: Reuse sve_probe_page for scatter stores
target/arm: Reuse sve_probe_page for gather loads
target/arm: Remove sve_memopidx
docs/devel/loads-stores.rst | 39 +-
include/exec/cpu-all.h | 13 +-
include/exec/cpu_ldst.h | 277 ++++-
include/exec/exec-all.h | 39 +
include/hw/core/cpu.h | 23 +
target/arm/internals.h | 5 -
accel/tcg/cputlb.c | 413 ++++---
accel/tcg/user-exec.c | 247 +++-
exec.c | 2 +-
target/arm/sve_helper.c | 2237 +++++++++++++++++++----------------
target/arm/translate-sve.c | 17 +-
11 files changed, 1985 insertions(+), 1327 deletions(-)
--
2.20.1
next reply other threads:[~2020-04-22 4:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-22 4:32 Richard Henderson [this message]
2020-04-22 4:32 ` [PATCH v3 01/18] exec: Add block comments for watchpoint routines Richard Henderson
2020-04-27 9:27 ` Peter Maydell
2020-04-22 4:32 ` [PATCH v3 02/18] exec: Fix cpu_watchpoint_address_matches address length Richard Henderson
2020-04-27 9:28 ` Peter Maydell
2020-04-22 4:32 ` [PATCH v3 03/18] accel/tcg: Add block comment for probe_access Richard Henderson
2020-04-22 4:32 ` [PATCH v3 04/18] accel/tcg: Add probe_access_flags Richard Henderson
2020-04-27 10:48 ` Peter Maydell
2020-04-27 16:00 ` Richard Henderson
2020-05-04 9:39 ` Peter Maydell
2020-04-22 4:32 ` [PATCH v3 05/18] accel/tcg: Add endian-specific cpu_{ld, st}* operations Richard Henderson
2020-04-27 9:46 ` Peter Maydell
2020-04-22 4:32 ` [PATCH v3 06/18] target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn Richard Henderson
2020-04-27 10:51 ` Peter Maydell
2020-04-22 4:32 ` [PATCH v3 07/18] target/arm: Drop manual handling of set/clear_helper_retaddr Richard Henderson
2020-04-22 4:32 ` [PATCH v3 08/18] target/arm: Add sve infrastructure for page lookup Richard Henderson
2020-04-27 11:00 ` Peter Maydell
2020-04-22 4:33 ` [PATCH v3 09/18] target/arm: Adjust interface of sve_ld1_host_fn Richard Henderson
2020-04-22 4:33 ` [PATCH v3 10/18] target/arm: Use SVEContLdSt in sve_ld1_r Richard Henderson
2020-04-22 4:33 ` [PATCH v3 11/18] target/arm: Handle watchpoints " Richard Henderson
2020-04-22 4:33 ` [PATCH v3 12/18] target/arm: Use SVEContLdSt for multi-register contiguous loads Richard Henderson
2020-04-22 4:33 ` [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads Richard Henderson
2020-04-27 11:03 ` Peter Maydell
2020-04-27 16:16 ` Richard Henderson
2020-04-27 16:32 ` Peter Maydell
2020-04-27 16:45 ` Richard Henderson
2020-04-27 18:38 ` Peter Maydell
2020-04-28 15:02 ` Richard Henderson
2020-04-22 4:33 ` [PATCH v3 14/18] target/arm: Use SVEContLdSt for contiguous stores Richard Henderson
2020-04-22 4:33 ` [PATCH v3 15/18] target/arm: Reuse sve_probe_page for gather first-fault loads Richard Henderson
2020-04-22 4:33 ` [PATCH v3 16/18] target/arm: Reuse sve_probe_page for scatter stores Richard Henderson
2020-04-22 4:33 ` [PATCH v3 17/18] target/arm: Reuse sve_probe_page for gather loads Richard Henderson
2020-04-22 4:33 ` [PATCH v3 18/18] target/arm: Remove sve_memopidx Richard Henderson
2020-04-22 5:37 ` [PATCH v3 00/18] target/arm: sve load/store improvements no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200422043309.18430-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).