From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>,
Eric Auger <eric.auger@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>,
Kwangwoo Lee <kwangwoo.lee@sk.com>,
Richard Henderson <rth@twiddle.net>
Subject: [PULL 16/29] nvdimm: Use configurable ACPI IO base and size
Date: Mon, 4 May 2020 10:29:51 -0400 [thread overview]
Message-ID: <20200504142814.157589-17-mst@redhat.com> (raw)
In-Reply-To: <20200504142814.157589-1-mst@redhat.com>
From: Kwangwoo Lee <kwangwoo.lee@sk.com>
This patch makes IO base and size configurable to create NPIO AML for
ACPI NFIT. Since a different architecture like AArch64 does not use
port-mapped IO, a configurable IO base is required to create correct
mapping of ACPI IO address and size.
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-3-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/i386/acpi-build.h | 3 +++
include/hw/mem/nvdimm.h | 3 +++
hw/acpi/nvdimm.c | 32 ++++++++++++++++++++++----------
hw/i386/acpi-build.c | 6 ++++++
hw/i386/pc_piix.c | 2 ++
hw/i386/pc_q35.c | 2 ++
6 files changed, 38 insertions(+), 10 deletions(-)
diff --git a/hw/i386/acpi-build.h b/hw/i386/acpi-build.h
index 007332e51c..74df5fc612 100644
--- a/hw/i386/acpi-build.h
+++ b/hw/i386/acpi-build.h
@@ -1,6 +1,9 @@
#ifndef HW_I386_ACPI_BUILD_H
#define HW_I386_ACPI_BUILD_H
+#include "hw/acpi/acpi-defs.h"
+
+extern const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio;
void acpi_setup(void);
diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h
index 4807ca615b..a3c08955e8 100644
--- a/include/hw/mem/nvdimm.h
+++ b/include/hw/mem/nvdimm.h
@@ -26,6 +26,7 @@
#include "hw/mem/pc-dimm.h"
#include "hw/acpi/bios-linker-loader.h"
#include "qemu/uuid.h"
+#include "hw/acpi/aml-build.h"
#define NVDIMM_DEBUG 0
#define nvdimm_debug(fmt, ...) \
@@ -147,10 +148,12 @@ struct NVDIMMState {
*/
int32_t persistence;
char *persistence_string;
+ struct AcpiGenericAddress dsm_io;
};
typedef struct NVDIMMState NVDIMMState;
void nvdimm_init_acpi_state(NVDIMMState *state, MemoryRegion *io,
+ struct AcpiGenericAddress dsm_io,
FWCfgState *fw_cfg, Object *owner);
void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data,
BIOSLinker *linker, NVDIMMState *state,
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c
index df0790719a..fa7bf8b507 100644
--- a/hw/acpi/nvdimm.c
+++ b/hw/acpi/nvdimm.c
@@ -900,11 +900,13 @@ void nvdimm_acpi_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev)
}
void nvdimm_init_acpi_state(NVDIMMState *state, MemoryRegion *io,
+ struct AcpiGenericAddress dsm_io,
FWCfgState *fw_cfg, Object *owner)
{
+ state->dsm_io = dsm_io;
memory_region_init_io(&state->io_mr, owner, &nvdimm_dsm_ops, state,
- "nvdimm-acpi-io", NVDIMM_ACPI_IO_LEN);
- memory_region_add_subregion(io, NVDIMM_ACPI_IO_BASE, &state->io_mr);
+ "nvdimm-acpi-io", dsm_io.bit_width >> 3);
+ memory_region_add_subregion(io, dsm_io.address, &state->io_mr);
state->dsm_mem = g_array_new(false, true /* clear */, 1);
acpi_data_push(state->dsm_mem, sizeof(NvdimmDsmIn));
@@ -933,13 +935,15 @@ void nvdimm_init_acpi_state(NVDIMMState *state, MemoryRegion *io,
#define NVDIMM_QEMU_RSVD_UUID "648B9CF2-CDA1-4312-8AD9-49C4AF32BD62"
-static void nvdimm_build_common_dsm(Aml *dev)
+static void nvdimm_build_common_dsm(Aml *dev,
+ NVDIMMState *nvdimm_state)
{
Aml *method, *ifctx, *function, *handle, *uuid, *dsm_mem, *elsectx2;
Aml *elsectx, *unsupport, *unpatched, *expected_uuid, *uuid_invalid;
Aml *pckg, *pckg_index, *pckg_buf, *field, *dsm_out_buf, *dsm_out_buf_size;
Aml *whilectx, *offset;
uint8_t byte_list[1];
+ AmlRegionSpace rs;
method = aml_method(NVDIMM_COMMON_DSM, 5, AML_SERIALIZED);
uuid = aml_arg(0);
@@ -950,9 +954,16 @@ static void nvdimm_build_common_dsm(Aml *dev)
aml_append(method, aml_store(aml_name(NVDIMM_ACPI_MEM_ADDR), dsm_mem));
+ if (nvdimm_state->dsm_io.space_id == AML_AS_SYSTEM_IO) {
+ rs = AML_SYSTEM_IO;
+ } else {
+ rs = AML_SYSTEM_MEMORY;
+ }
+
/* map DSM memory and IO into ACPI namespace. */
- aml_append(method, aml_operation_region(NVDIMM_DSM_IOPORT, AML_SYSTEM_IO,
- aml_int(NVDIMM_ACPI_IO_BASE), NVDIMM_ACPI_IO_LEN));
+ aml_append(method, aml_operation_region(NVDIMM_DSM_IOPORT, rs,
+ aml_int(nvdimm_state->dsm_io.address),
+ nvdimm_state->dsm_io.bit_width >> 3));
aml_append(method, aml_operation_region(NVDIMM_DSM_MEMORY,
AML_SYSTEM_MEMORY, dsm_mem, sizeof(NvdimmDsmIn)));
@@ -967,7 +978,7 @@ static void nvdimm_build_common_dsm(Aml *dev)
field = aml_field(NVDIMM_DSM_IOPORT, AML_DWORD_ACC, AML_NOLOCK,
AML_PRESERVE);
aml_append(field, aml_named_field(NVDIMM_DSM_NOTIFY,
- NVDIMM_ACPI_IO_LEN * BITS_PER_BYTE));
+ nvdimm_state->dsm_io.bit_width));
aml_append(method, field);
/*
@@ -1268,7 +1279,8 @@ static void nvdimm_build_nvdimm_devices(Aml *root_dev, uint32_t ram_slots)
}
static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
- BIOSLinker *linker, GArray *dsm_dma_area,
+ BIOSLinker *linker,
+ NVDIMMState *nvdimm_state,
uint32_t ram_slots)
{
Aml *ssdt, *sb_scope, *dev;
@@ -1296,7 +1308,7 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
*/
aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0012")));
- nvdimm_build_common_dsm(dev);
+ nvdimm_build_common_dsm(dev, nvdimm_state);
/* 0 is reserved for root device. */
nvdimm_build_device_dsm(dev, 0);
@@ -1315,7 +1327,7 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
NVDIMM_ACPI_MEM_ADDR);
bios_linker_loader_alloc(linker,
- NVDIMM_DSM_MEM_FILE, dsm_dma_area,
+ NVDIMM_DSM_MEM_FILE, nvdimm_state->dsm_mem,
sizeof(NvdimmDsmIn), false /* high memory */);
bios_linker_loader_add_pointer(linker,
ACPI_BUILD_TABLE_FILE, mem_addr_offset, sizeof(uint32_t),
@@ -1337,7 +1349,7 @@ void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data,
return;
}
- nvdimm_build_ssdt(table_offsets, table_data, linker, state->dsm_mem,
+ nvdimm_build_ssdt(table_offsets, table_data, linker, state,
ram_slots);
device_list = nvdimm_get_device_list();
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 97f3c75cd9..7d880bec4a 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -128,6 +128,12 @@ typedef struct FwCfgTPMConfig {
static bool acpi_get_mcfg(AcpiMcfgInfo *mcfg);
+const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = {
+ .space_id = AML_AS_SYSTEM_IO,
+ .address = NVDIMM_ACPI_IO_BASE,
+ .bit_width = NVDIMM_ACPI_IO_LEN << 3
+};
+
static void init_common_fadt_data(MachineState *ms, Object *o,
AcpiFadtData *data)
{
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index 22dee0e76c..b75087d71b 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -61,6 +61,7 @@
#include "migration/misc.h"
#include "sysemu/numa.h"
#include "hw/mem/nvdimm.h"
+#include "hw/i386/acpi-build.h"
#define MAX_IDE_BUS 2
@@ -297,6 +298,7 @@ static void pc_init1(MachineState *machine,
if (machine->nvdimms_state->is_enabled) {
nvdimm_init_acpi_state(machine->nvdimms_state, system_io,
+ x86_nvdimm_acpi_dsmio,
x86ms->fw_cfg, OBJECT(pcms));
}
}
diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index d37c425e22..d2806c1b29 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -54,6 +54,7 @@
#include "qemu/error-report.h"
#include "sysemu/numa.h"
#include "hw/mem/nvdimm.h"
+#include "hw/i386/acpi-build.h"
/* ICH9 AHCI has 6 ports */
#define MAX_SATA_PORTS 6
@@ -315,6 +316,7 @@ static void pc_q35_init(MachineState *machine)
if (machine->nvdimms_state->is_enabled) {
nvdimm_init_acpi_state(machine->nvdimms_state, system_io,
+ x86_nvdimm_acpi_dsmio,
x86ms->fw_cfg, OBJECT(pcms));
}
}
--
MST
next prev parent reply other threads:[~2020-05-04 14:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 14:29 [PULL 00/29] virtio,acpi,pci,pc: backlog from pre-5.0 Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 01/29] hw/pci/pcie: Forbid hot-plug if it's disabled on the slot Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 02/29] hw/pci/pcie: Replace PCI_DEVICE() casts with existing variable Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 03/29] move 'typedef Aml' to qemu/types.h Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 04/29] acpi: add aml builder stubs Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 05/29] qtest: allow DSDT acpi table changes Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 06/29] acpi: drop pointless _STA method Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 07/29] acpi: add ISADeviceClass->build_aml() Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 08/29] rtc: add RTC_ISA_BASE Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 09/29] virtio-vga: fix virtio-vga bar ordering Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 10/29] virtio-pci: update virtio pci bar layout documentation Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 11/29] vhost-user-blk: fix invalid memory access Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 12/29] checkpatch: fix acpi check with multiple file name Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 13/29] checkpatch: ignore allowed diff list Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 14/29] acpi: DSDT without _STA Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 15/29] hw/acpi/nvdimm: Fix for NVDIMM incorrect DSM output buffer length Michael S. Tsirkin
2020-05-04 14:29 ` Michael S. Tsirkin [this message]
2020-05-04 14:29 ` [PULL 17/29] hw/arm/virt: Add nvdimm hot-plug infrastructure Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 18/29] hw/arm/virt: Add nvdimm hotplug support Michael S. Tsirkin
2020-05-04 14:29 ` [PULL 19/29] tests: Update ACPI tables list for upcoming arm/virt test changes Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 20/29] bios-tables-test: test pc-dimm and nvdimm coldplug for arm/virt Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 21/29] tests/acpi: add expected tables for bios-tables-test Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 22/29] Refactor vhost_user_set_mem_table functions Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 23/29] acpi: unit-test: Ignore diff in WAET ACPI table Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 24/29] acpi: Add Windows ACPI Emulated Device Table (WAET) Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 25/29] acpi: unit-test: Update WAET ACPI Table expected binaries Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 26/29] hw/i386/pc: Create 'vmport' device in place Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 27/29] hw/i386/vmport: Remove unused 'hw/input/i8042.h' include Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 28/29] hw/i386: Add 'vmport.h' local header Michael S. Tsirkin
2020-05-04 14:30 ` [PULL 29/29] hw/i386: Make vmmouse helpers static Michael S. Tsirkin
2020-05-04 19:35 ` [PULL 00/29] virtio,acpi,pci,pc: backlog from pre-5.0 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200504142814.157589-17-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=eric.auger@redhat.com \
--cc=imammedo@redhat.com \
--cc=kwangwoo.lee@sk.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=xiaoguangrong.eric@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).