qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Eduardo Habkost <ehabkost@redhat.com>,
	Sergio Lopez <slp@redhat.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Gerd Hoffmann <kraxel@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Richard Henderson <rth@twiddle.net>
Subject: [PATCH v2 05/13] acpi: move acpi_init_common_fadt_data to acpi-common.c
Date: Tue,  5 May 2020 15:42:57 +0200	[thread overview]
Message-ID: <20200505134305.22666-6-kraxel@redhat.com> (raw)
In-Reply-To: <20200505134305.22666-1-kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/i386/acpi-common.h |  5 ++++-
 hw/i386/acpi-build.c  | 43 +------------------------------------------
 hw/i386/acpi-common.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 43 deletions(-)

diff --git a/hw/i386/acpi-common.h b/hw/i386/acpi-common.h
index 583c320bbe7d..5788a13da9ca 100644
--- a/hw/i386/acpi-common.h
+++ b/hw/i386/acpi-common.h
@@ -1,7 +1,8 @@
 #ifndef HW_I386_ACPI_COMMON_H
 #define HW_I386_ACPI_COMMON_H
+
+#include "include/hw/acpi/acpi-defs.h"
 #include "include/hw/acpi/acpi_dev_interface.h"
-
 #include "include/hw/acpi/bios-linker-loader.h"
 #include "include/hw/i386/x86.h"
 
@@ -12,5 +13,7 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      bool has_pci);
 void acpi_build_facs(GArray *table_data);
+void acpi_init_common_fadt_data(MachineState *ms, Object *o,
+                                AcpiFadtData *data);
 
 #endif
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index a69b85a266e7..d1f14394734e 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -132,47 +132,6 @@ const struct AcpiGenericAddress x86_nvdimm_acpi_dsmio = {
     .bit_width = NVDIMM_ACPI_IO_LEN << 3
 };
 
-static void init_common_fadt_data(MachineState *ms, Object *o,
-                                  AcpiFadtData *data)
-{
-    uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL);
-    AmlAddressSpace as = AML_AS_SYSTEM_IO;
-    AcpiFadtData fadt = {
-        .rev = 3,
-        .flags =
-            (1 << ACPI_FADT_F_WBINVD) |
-            (1 << ACPI_FADT_F_PROC_C1) |
-            (1 << ACPI_FADT_F_SLP_BUTTON) |
-            (1 << ACPI_FADT_F_RTC_S4) |
-            (1 << ACPI_FADT_F_USE_PLATFORM_CLOCK) |
-            /* APIC destination mode ("Flat Logical") has an upper limit of 8
-             * CPUs for more than 8 CPUs, "Clustered Logical" mode has to be
-             * used
-             */
-            ((ms->smp.max_cpus > 8) ?
-                        (1 << ACPI_FADT_F_FORCE_APIC_CLUSTER_MODEL) : 0),
-        .int_model = 1 /* Multiple APIC */,
-        .rtc_century = RTC_CENTURY,
-        .plvl2_lat = 0xfff /* C2 state not supported */,
-        .plvl3_lat = 0xfff /* C3 state not supported */,
-        .smi_cmd = ACPI_PORT_SMI_CMD,
-        .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL),
-        .acpi_enable_cmd =
-            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL),
-        .acpi_disable_cmd =
-            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL),
-        .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io },
-        .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8,
-                      .address = io + 0x04 },
-        .pm_tmr = { .space_id = as, .bit_width = 4 * 8, .address = io + 0x08 },
-        .gpe0_blk = { .space_id = as, .bit_width =
-            object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK_LEN, NULL) * 8,
-            .address = object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK, NULL)
-        },
-    };
-    *data = fadt;
-}
-
 static Object *object_resolve_type_unambiguous(const char *typename)
 {
     bool ambig;
@@ -195,7 +154,7 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm)
     pm->pcihp_io_len = 0;
 
     assert(obj);
-    init_common_fadt_data(machine, obj, &pm->fadt);
+    acpi_init_common_fadt_data(machine, obj, &pm->fadt);
     if (piix) {
         /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */
         pm->fadt.rev = 1;
diff --git a/hw/i386/acpi-common.c b/hw/i386/acpi-common.c
index 5187653893a8..69dfbf0252f3 100644
--- a/hw/i386/acpi-common.c
+++ b/hw/i386/acpi-common.c
@@ -28,6 +28,8 @@
 #include "hw/acpi/aml-build.h"
 #include "hw/acpi/utils.h"
 #include "hw/i386/pc.h"
+#include "hw/isa/apm.h"
+#include "hw/rtc/mc146818rtc_regs.h"
 #include "target/i386/cpu.h"
 
 #include "acpi-build.h"
@@ -161,3 +163,44 @@ void acpi_build_facs(GArray *table_data)
     memcpy(&facs->signature, "FACS", 4);
     facs->length = cpu_to_le32(sizeof(*facs));
 }
+
+void acpi_init_common_fadt_data(MachineState *ms, Object *o,
+                                AcpiFadtData *data)
+{
+    uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL);
+    AmlAddressSpace as = AML_AS_SYSTEM_IO;
+    AcpiFadtData fadt = {
+        .rev = 3,
+        .flags =
+            (1 << ACPI_FADT_F_WBINVD) |
+            (1 << ACPI_FADT_F_PROC_C1) |
+            (1 << ACPI_FADT_F_SLP_BUTTON) |
+            (1 << ACPI_FADT_F_RTC_S4) |
+            (1 << ACPI_FADT_F_USE_PLATFORM_CLOCK) |
+            /* APIC destination mode ("Flat Logical") has an upper limit of 8
+             * CPUs for more than 8 CPUs, "Clustered Logical" mode has to be
+             * used
+             */
+            ((ms->smp.max_cpus > 8) ?
+                        (1 << ACPI_FADT_F_FORCE_APIC_CLUSTER_MODEL) : 0),
+        .int_model = 1 /* Multiple APIC */,
+        .rtc_century = RTC_CENTURY,
+        .plvl2_lat = 0xfff /* C2 state not supported */,
+        .plvl3_lat = 0xfff /* C3 state not supported */,
+        .smi_cmd = ACPI_PORT_SMI_CMD,
+        .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL),
+        .acpi_enable_cmd =
+            object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL),
+        .acpi_disable_cmd =
+            object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL),
+        .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io },
+        .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8,
+                      .address = io + 0x04 },
+        .pm_tmr = { .space_id = as, .bit_width = 4 * 8, .address = io + 0x08 },
+        .gpe0_blk = { .space_id = as, .bit_width =
+            object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK_LEN, NULL) * 8,
+            .address = object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK, NULL)
+        },
+    };
+    *data = fadt;
+}
-- 
2.18.4



  parent reply	other threads:[~2020-05-05 13:53 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-05 13:42 [PATCH v2 00/13] microvm: add acpi support Gerd Hoffmann
2020-05-05 13:42 ` [PATCH v2 01/13] acpi: make build_madt() more generic Gerd Hoffmann
2020-05-05 13:54   ` Igor Mammedov
2020-05-05 13:42 ` [PATCH v2 02/13] acpi: create acpi-common.c and move madt code Gerd Hoffmann
2020-05-05 14:00   ` Igor Mammedov
2020-05-05 13:42 ` [PATCH v2 03/13] acpi: madt: skip pci override on pci-less systems (microvm) Gerd Hoffmann
2020-05-05 14:10   ` Igor Mammedov
2020-05-05 14:17   ` Philippe Mathieu-Daudé
2020-05-05 13:42 ` [PATCH v2 04/13] acpi: move acpi_build_facs to acpi-common.c Gerd Hoffmann
2020-05-05 13:49   ` Philippe Mathieu-Daudé
2020-05-05 14:16   ` Igor Mammedov
2020-05-05 13:42 ` Gerd Hoffmann [this message]
2020-05-05 14:25   ` [PATCH v2 05/13] acpi: move acpi_init_common_fadt_data " Igor Mammedov
2020-05-06 10:03     ` Gerd Hoffmann
2020-05-05 13:42 ` [PATCH v2 06/13] acpi: move acpi_align_size to acpi-common.h Gerd Hoffmann
2020-05-05 13:53   ` Philippe Mathieu-Daudé
2020-05-05 14:30   ` Igor Mammedov
2020-05-05 13:42 ` [PATCH v2 07/13] acpi: fadt: add hw-reduced sleep register support Gerd Hoffmann
2020-05-05 14:35   ` Igor Mammedov
2020-05-05 13:43 ` [PATCH v2 08/13] acpi: generic event device for x86 Gerd Hoffmann
2020-05-05 15:03   ` Igor Mammedov
2020-05-06 10:31     ` Gerd Hoffmann
2020-05-06 12:41       ` Igor Mammedov
2020-05-07 14:03         ` Gerd Hoffmann
2020-05-05 13:43 ` [PATCH v2 09/13] microvm: add minimal acpi support Gerd Hoffmann
2020-05-05 15:20   ` Igor Mammedov
2020-05-06 10:35     ` Gerd Hoffmann
2020-05-06 14:14       ` Igor Mammedov
2020-05-07 13:39         ` Gerd Hoffmann
2020-05-05 13:43 ` [PATCH v2 10/13] microvm: disable virtio-mmio cmdline hack Gerd Hoffmann
2020-05-05 15:22   ` Igor Mammedov
2020-05-05 13:43 ` [PATCH v2 11/13] microvm: add acpi_dsdt_add_virtio() for x86 Gerd Hoffmann
2020-05-06  7:27   ` Sergio Lopez
2020-05-05 13:43 ` [PATCH v2 12/13] microvm: make virtio irq base runtime configurable Gerd Hoffmann
2020-05-06  7:28   ` Sergio Lopez
2020-05-05 13:43 ` [PATCH v2 13/13] microvm/acpi: use GSI 16-23 for virtio Gerd Hoffmann
2020-05-06  7:28   ` Sergio Lopez
2020-05-05 14:04 ` [PATCH v2 00/13] microvm: add acpi support Michael S. Tsirkin
2020-05-05 14:16   ` Philippe Mathieu-Daudé
2020-05-06  7:25     ` Sergio Lopez
2020-05-06 11:46   ` Gerd Hoffmann
2020-05-06 11:50     ` Michael S. Tsirkin
2020-05-07 13:57       ` Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200505134305.22666-6-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=slp@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).