From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: alex.bennee@linaro.org
Subject: [PATCH v3 00/19] tcg: Better handling of constants
Date: Fri, 8 May 2020 08:17:28 -0700 [thread overview]
Message-ID: <20200508151747.6166-1-richard.henderson@linaro.org> (raw)
V3 fixes the target/sparc regression during register allocation.
V1 blurb:
This promotes constants to full-fledged temporaries, which are then
hashed so we have only a single copy across the TB. If an opcode
requires forcing one into a register, then we will only do this
once -- at least until the register is killed, e.g. by a function call.
While this is probably an modest improvement for integer code, it is
significant for SVE vector code. In particular, where a generator function
loads a constant for the operation, and then the generator function is
called N times for the N x 128-bit vector. Previously we'd be loading
up the same constant N times and now we do so only once.
The existing tcg_const_{type}() functions are unchanged, allocating
a new temporary and initializing it. The constant propagation pass
of the optimizer will generally remove the temporary when it turns
out not to be modified further.
This adds new tcg_constant_{type}() functions which produce a read-only
temporary containing the constant which need not be freed. I have
updated the generic expanders to take advantage of this, but have not
touched the target front ends.
This also, in the end, allows the complete removal of the tcg opcodes
that create a constant: INDEX_op_movi_{i32,i64} and INDEX_op_dupi_vec.
Loading of constants into hard registers is completely controlled by
the register allocator.
r~
Richard Henderson (19):
tcg: Consolidate 3 bits into enum TCGTempKind
tcg: Add temp_readonly
tcg: Introduce TYPE_CONST temporaries
tcg: Use tcg_constant_i32 with icount expander
tcg: Use tcg_constant_{i32,i64} with tcg int expanders
tcg: Use tcg_constant_{i32,vec} with tcg vec expanders
tcg: Use tcg_constant_{i32,i64,vec} with tcg gvec expanders
tcg: Use tcg_constant_{i32,i64} with tcg plugins
tcg: Rename struct tcg_temp_info to TempOptInfo
tcg/optimize: Improve find_better_copy
tcg/optimize: Adjust TempOptInfo allocation
tcg/optimize: Use tcg_constant_internal with constant folding
tcg/tci: Add special tci_movi_{i32,i64} opcodes
tcg: Remove movi and dupi opcodes
tcg: Use tcg_out_dupi_vec from temp_load
tcg: Increase tcg_out_dupi_vec immediate to int64_t
tcg: Add tcg_reg_alloc_dup2
tcg/i386: Use tcg_constant_vec with tcg vec expanders
tcg: Remove tcg_gen_dup{8,16,32,64}i_vec
include/exec/gen-icount.h | 25 +--
include/tcg/tcg-op.h | 17 +-
include/tcg/tcg-opc.h | 11 +-
include/tcg/tcg.h | 50 ++++-
accel/tcg/plugin-gen.c | 49 ++---
tcg/aarch64/tcg-target.inc.c | 12 +-
tcg/arm/tcg-target.inc.c | 1 -
tcg/i386/tcg-target.inc.c | 110 ++++++----
tcg/mips/tcg-target.inc.c | 2 -
tcg/optimize.c | 204 +++++++++---------
tcg/ppc/tcg-target.inc.c | 24 +--
tcg/riscv/tcg-target.inc.c | 2 -
tcg/s390/tcg-target.inc.c | 2 -
tcg/sparc/tcg-target.inc.c | 2 -
tcg/tcg-op-gvec.c | 125 +++++------
tcg/tcg-op-vec.c | 83 ++++----
tcg/tcg-op.c | 216 +++++++++----------
tcg/tcg.c | 397 ++++++++++++++++++++++++++---------
tcg/tci.c | 4 +-
tcg/tci/tcg-target.inc.c | 6 +-
20 files changed, 751 insertions(+), 591 deletions(-)
--
2.20.1
next reply other threads:[~2020-05-08 15:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 15:17 Richard Henderson [this message]
2020-05-08 15:17 ` [PATCH v3 01/19] tcg: Consolidate 3 bits into enum TCGTempKind Richard Henderson
2020-05-08 18:57 ` Philippe Mathieu-Daudé
2020-05-08 15:17 ` [PATCH v3 02/19] tcg: Add temp_readonly Richard Henderson
2020-05-08 15:17 ` [PATCH v3 03/19] tcg: Introduce TYPE_CONST temporaries Richard Henderson
2020-05-08 15:17 ` [PATCH v3 04/19] tcg: Use tcg_constant_i32 with icount expander Richard Henderson
2020-05-08 15:17 ` [PATCH v3 05/19] tcg: Use tcg_constant_{i32, i64} with tcg int expanders Richard Henderson
2020-05-08 15:17 ` [PATCH v3 06/19] tcg: Use tcg_constant_{i32, vec} with tcg vec expanders Richard Henderson
2020-05-08 15:17 ` [PATCH v3 07/19] tcg: Use tcg_constant_{i32, i64, vec} with tcg gvec expanders Richard Henderson
2020-05-08 15:17 ` [PATCH v3 08/19] tcg: Use tcg_constant_{i32,i64} with tcg plugins Richard Henderson
2020-05-08 15:17 ` [PATCH v3 09/19] tcg: Rename struct tcg_temp_info to TempOptInfo Richard Henderson
2020-05-08 15:17 ` [PATCH v3 10/19] tcg/optimize: Improve find_better_copy Richard Henderson
2020-05-08 15:17 ` [PATCH v3 11/19] tcg/optimize: Adjust TempOptInfo allocation Richard Henderson
2020-05-08 15:17 ` [PATCH v3 12/19] tcg/optimize: Use tcg_constant_internal with constant folding Richard Henderson
2020-05-08 15:17 ` [PATCH v3 13/19] tcg/tci: Add special tci_movi_{i32,i64} opcodes Richard Henderson
2020-05-08 15:17 ` [PATCH v3 14/19] tcg: Remove movi and dupi opcodes Richard Henderson
2020-05-08 15:17 ` [PATCH v3 15/19] tcg: Use tcg_out_dupi_vec from temp_load Richard Henderson
2020-05-08 15:17 ` [PATCH v3 16/19] tcg: Increase tcg_out_dupi_vec immediate to int64_t Richard Henderson
2020-05-08 15:17 ` [PATCH v3 17/19] tcg: Add tcg_reg_alloc_dup2 Richard Henderson
2020-05-08 15:17 ` [PATCH v3 18/19] tcg/i386: Use tcg_constant_vec with tcg vec expanders Richard Henderson
2020-05-08 15:17 ` [PATCH v3 19/19] tcg: Remove tcg_gen_dup{8,16,32,64}i_vec Richard Henderson
2020-05-08 16:15 ` [PATCH v3 00/19] tcg: Better handling of constants Alex Bennée
2020-05-08 17:02 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508151747.6166-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).