From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [PATCH v3 07/16] target/arm: Create gen_gvec_{mla,mls}
Date: Fri, 8 May 2020 08:21:51 -0700 [thread overview]
Message-ID: <20200508152200.6547-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200508152200.6547-1-richard.henderson@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/translate.h | 7 +-
target/arm/translate-a64.c | 4 +-
target/arm/translate-neon.inc.c | 16 +----
target/arm/translate.c | 117 +++++++++++++++++---------------
4 files changed, 71 insertions(+), 73 deletions(-)
diff --git a/target/arm/translate.h b/target/arm/translate.h
index e35c812cc5..9354ceba35 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -286,8 +286,11 @@ void gen_gvec_cle0(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs,
void gen_gvec_cge0(unsigned vece, uint32_t rd_ofs, uint32_t rm_ofs,
uint32_t opr_sz, uint32_t max_sz);
-extern const GVecGen3 mla_op[4];
-extern const GVecGen3 mls_op[4];
+void gen_gvec_mla(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz);
+void gen_gvec_mls(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz);
+
extern const GVecGen3 cmtst_op[4];
extern const GVecGen3 sshl_op[4];
extern const GVecGen3 ushl_op[4];
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index fef93dc27a..ab9df12e44 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -11226,9 +11226,9 @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn)
return;
case 0x12: /* MLA, MLS */
if (u) {
- gen_gvec_op3(s, is_q, rd, rn, rm, &mls_op[size]);
+ gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_mls, size);
} else {
- gen_gvec_op3(s, is_q, rd, rn, rm, &mla_op[size]);
+ gen_gvec_fn3(s, is_q, rd, rn, rm, gen_gvec_mla, size);
}
return;
case 0x11:
diff --git a/target/arm/translate-neon.inc.c b/target/arm/translate-neon.inc.c
index 50b77b6d71..aefeff498a 100644
--- a/target/arm/translate-neon.inc.c
+++ b/target/arm/translate-neon.inc.c
@@ -632,6 +632,8 @@ DO_3SAME_NO_SZ_3(VMAX_U, tcg_gen_gvec_umax)
DO_3SAME_NO_SZ_3(VMIN_S, tcg_gen_gvec_smin)
DO_3SAME_NO_SZ_3(VMIN_U, tcg_gen_gvec_umin)
DO_3SAME_NO_SZ_3(VMUL, tcg_gen_gvec_mul)
+DO_3SAME_NO_SZ_3(VMLA, gen_gvec_mla)
+DO_3SAME_NO_SZ_3(VMLS, gen_gvec_mls)
#define DO_3SAME_CMP(INSN, COND) \
static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \
@@ -685,20 +687,6 @@ static bool trans_VMUL_p_3s(DisasContext *s, arg_3same *a)
return do_3same(s, a, gen_VMUL_p_3s);
}
-#define DO_3SAME_GVEC3_NO_SZ_3(INSN, OPARRAY) \
- static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \
- uint32_t rn_ofs, uint32_t rm_ofs, \
- uint32_t oprsz, uint32_t maxsz) \
- { \
- tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, \
- oprsz, maxsz, &OPARRAY[vece]); \
- } \
- DO_3SAME_NO_SZ_3(INSN, gen_##INSN##_3s)
-
-
-DO_3SAME_GVEC3_NO_SZ_3(VMLA, mla_op)
-DO_3SAME_GVEC3_NO_SZ_3(VMLS, mls_op)
-
#define DO_3SAME_GVEC3_SHIFT(INSN, OPARRAY) \
static void gen_##INSN##_3s(unsigned vece, uint32_t rd_ofs, \
uint32_t rn_ofs, uint32_t rm_ofs, \
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 45df3743f6..52b6d32cf1 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -4520,62 +4520,69 @@ static void gen_mls_vec(unsigned vece, TCGv_vec d, TCGv_vec a, TCGv_vec b)
/* Note that while NEON does not support VMLA and VMLS as 64-bit ops,
* these tables are shared with AArch64 which does support them.
*/
+void gen_gvec_mla(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz)
+{
+ static const TCGOpcode vecop_list[] = {
+ INDEX_op_mul_vec, INDEX_op_add_vec, 0
+ };
+ static const GVecGen3 ops[4] = {
+ { .fni4 = gen_mla8_i32,
+ .fniv = gen_mla_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_8 },
+ { .fni4 = gen_mla16_i32,
+ .fniv = gen_mla_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_16 },
+ { .fni4 = gen_mla32_i32,
+ .fniv = gen_mla_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_32 },
+ { .fni8 = gen_mla64_i64,
+ .fniv = gen_mla_vec,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_64 },
+ };
+ tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &ops[vece]);
+}
-static const TCGOpcode vecop_list_mla[] = {
- INDEX_op_mul_vec, INDEX_op_add_vec, 0
-};
-
-static const TCGOpcode vecop_list_mls[] = {
- INDEX_op_mul_vec, INDEX_op_sub_vec, 0
-};
-
-const GVecGen3 mla_op[4] = {
- { .fni4 = gen_mla8_i32,
- .fniv = gen_mla_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mla,
- .vece = MO_8 },
- { .fni4 = gen_mla16_i32,
- .fniv = gen_mla_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mla,
- .vece = MO_16 },
- { .fni4 = gen_mla32_i32,
- .fniv = gen_mla_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mla,
- .vece = MO_32 },
- { .fni8 = gen_mla64_i64,
- .fniv = gen_mla_vec,
- .prefer_i64 = TCG_TARGET_REG_BITS == 64,
- .load_dest = true,
- .opt_opc = vecop_list_mla,
- .vece = MO_64 },
-};
-
-const GVecGen3 mls_op[4] = {
- { .fni4 = gen_mls8_i32,
- .fniv = gen_mls_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mls,
- .vece = MO_8 },
- { .fni4 = gen_mls16_i32,
- .fniv = gen_mls_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mls,
- .vece = MO_16 },
- { .fni4 = gen_mls32_i32,
- .fniv = gen_mls_vec,
- .load_dest = true,
- .opt_opc = vecop_list_mls,
- .vece = MO_32 },
- { .fni8 = gen_mls64_i64,
- .fniv = gen_mls_vec,
- .prefer_i64 = TCG_TARGET_REG_BITS == 64,
- .load_dest = true,
- .opt_opc = vecop_list_mls,
- .vece = MO_64 },
-};
+void gen_gvec_mls(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs,
+ uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz)
+{
+ static const TCGOpcode vecop_list[] = {
+ INDEX_op_mul_vec, INDEX_op_sub_vec, 0
+ };
+ static const GVecGen3 ops[4] = {
+ { .fni4 = gen_mls8_i32,
+ .fniv = gen_mls_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_8 },
+ { .fni4 = gen_mls16_i32,
+ .fniv = gen_mls_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_16 },
+ { .fni4 = gen_mls32_i32,
+ .fniv = gen_mls_vec,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_32 },
+ { .fni8 = gen_mls64_i64,
+ .fniv = gen_mls_vec,
+ .prefer_i64 = TCG_TARGET_REG_BITS == 64,
+ .load_dest = true,
+ .opt_opc = vecop_list,
+ .vece = MO_64 },
+ };
+ tcg_gen_gvec_3(rd_ofs, rn_ofs, rm_ofs, opr_sz, max_sz, &ops[vece]);
+}
/* CMTST : test is "if (X & Y != 0)". */
static void gen_cmtst_i32(TCGv_i32 d, TCGv_i32 a, TCGv_i32 b)
--
2.20.1
next prev parent reply other threads:[~2020-05-08 15:40 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 15:21 [PATCH v3 00/16] target/arm: partial vector cleanup Richard Henderson
2020-05-08 15:21 ` [PATCH v3 01/16] target/arm: Create gen_gvec_[us]sra Richard Henderson
2020-05-12 13:20 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 02/16] target/arm: Create gen_gvec_{u,s}{rshr,rsra} Richard Henderson
2020-05-12 13:09 ` Peter Maydell
2020-05-12 13:46 ` Peter Maydell
2020-05-13 2:04 ` Richard Henderson
2020-05-12 13:51 ` Peter Maydell
2020-05-13 2:06 ` Richard Henderson
2020-05-08 15:21 ` [PATCH v3 03/16] target/arm: Create gen_gvec_{sri,sli} Richard Henderson
2020-05-12 13:52 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 04/16] target/arm: Remove unnecessary range check for VSHL Richard Henderson
2020-05-12 13:53 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 05/16] target/arm: Tidy handle_vec_simd_shri Richard Henderson
2020-05-12 13:56 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 06/16] target/arm: Create gen_gvec_{ceq,clt,cle,cgt,cge}0 Richard Henderson
2020-05-12 14:10 ` [PATCH v3 06/16] target/arm: Create gen_gvec_{ceq, clt, cle, cgt, cge}0 Peter Maydell
2020-05-08 15:21 ` Richard Henderson [this message]
2020-05-12 14:11 ` [PATCH v3 07/16] target/arm: Create gen_gvec_{mla,mls} Peter Maydell
2020-05-08 15:21 ` [PATCH v3 08/16] target/arm: Swap argument order for VSHL during decode Richard Henderson
2020-05-12 14:14 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 09/16] target/arm: Create gen_gvec_{cmtst,ushl,sshl} Richard Henderson
2020-05-12 14:16 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 10/16] target/arm: Create gen_gvec_{uqadd, sqadd, uqsub, sqsub} Richard Henderson
2020-05-12 14:18 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 11/16] target/arm: Remove fp_status from helper_{recpe, rsqrte}_u32 Richard Henderson
2020-05-12 14:19 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 12/16] target/arm: Create gen_gvec_{qrdmla,qrdmls} Richard Henderson
2020-05-12 14:20 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 13/16] target/arm: Pass pointer to qc to qrdmla/qrdmls Richard Henderson
2020-05-12 14:28 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 14/16] target/arm: Clear tail in gvec_fmul_idx_*, gvec_fmla_idx_* Richard Henderson
2020-05-12 14:29 ` Peter Maydell
2020-05-08 15:21 ` [PATCH v3 15/16] target/arm: Vectorize SABD/UABD Richard Henderson
2020-05-12 14:40 ` Peter Maydell
2020-05-08 15:22 ` [PATCH v3 16/16] target/arm: Vectorize SABA/UABA Richard Henderson
2020-05-12 14:41 ` Peter Maydell
2020-05-12 12:55 ` [PATCH v3 00/16] target/arm: partial vector cleanup Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508152200.6547-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).