From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org
Subject: [PATCH v5 12/19] target/arm: Handle watchpoints in sve_ld1_r
Date: Fri, 8 May 2020 08:43:52 -0700 [thread overview]
Message-ID: <20200508154359.7494-13-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200508154359.7494-1-richard.henderson@linaro.org>
Handle all of the watchpoints for active elements all at once,
before we've modified the vector register. This removes the
TLB_WATCHPOINT bit from page[].flags, which means that we can
use the normal fast path via RAM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/sve_helper.c | 72 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index 6bae342a17..7992a569b0 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -4371,6 +4371,70 @@ static bool sve_cont_ldst_pages(SVEContLdSt *info, SVEContFault fault,
return have_work;
}
+static void sve_cont_ldst_watchpoints(SVEContLdSt *info, CPUARMState *env,
+ uint64_t *vg, target_ulong addr,
+ int esize, int msize, int wp_access,
+ uintptr_t retaddr)
+{
+#ifndef CONFIG_USER_ONLY
+ intptr_t mem_off, reg_off, reg_last;
+ int flags0 = info->page[0].flags;
+ int flags1 = info->page[1].flags;
+
+ if (likely(!((flags0 | flags1) & TLB_WATCHPOINT))) {
+ return;
+ }
+
+ /* Indicate that watchpoints are handled. */
+ info->page[0].flags = flags0 & ~TLB_WATCHPOINT;
+ info->page[1].flags = flags1 & ~TLB_WATCHPOINT;
+
+ if (flags0 & TLB_WATCHPOINT) {
+ mem_off = info->mem_off_first[0];
+ reg_off = info->reg_off_first[0];
+ reg_last = info->reg_off_last[0];
+
+ while (reg_off <= reg_last) {
+ uint64_t pg = vg[reg_off >> 6];
+ do {
+ if ((pg >> (reg_off & 63)) & 1) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off,
+ msize, info->page[0].attrs,
+ wp_access, retaddr);
+ }
+ reg_off += esize;
+ mem_off += msize;
+ } while (reg_off <= reg_last && (reg_off & 63));
+ }
+ }
+
+ mem_off = info->mem_off_split;
+ if (mem_off >= 0) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off, msize,
+ info->page[0].attrs, wp_access, retaddr);
+ }
+
+ mem_off = info->mem_off_first[1];
+ if ((flags1 & TLB_WATCHPOINT) && mem_off >= 0) {
+ reg_off = info->reg_off_first[1];
+ reg_last = info->reg_off_last[1];
+
+ do {
+ uint64_t pg = vg[reg_off >> 6];
+ do {
+ if ((pg >> (reg_off & 63)) & 1) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off,
+ msize, info->page[1].attrs,
+ wp_access, retaddr);
+ }
+ reg_off += esize;
+ mem_off += msize;
+ } while (reg_off & 63);
+ } while (reg_off <= reg_last);
+ }
+#endif
+}
+
/*
* The result of tlb_vaddr_to_host for user-only is just g2h(x),
* which is always non-null. Elide the useless test.
@@ -4412,13 +4476,19 @@ void sve_ld1_r(CPUARMState *env, uint64_t *vg, const target_ulong addr,
/* Probe the page(s). Exit with exception for any invalid page. */
sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_LOAD, retaddr);
+ /* Handle watchpoints for all active elements. */
+ sve_cont_ldst_watchpoints(&info, env, vg, addr, 1 << esz, 1 << msz,
+ BP_MEM_READ, retaddr);
+
+ /* TODO: MTE check. */
+
flags = info.page[0].flags | info.page[1].flags;
if (unlikely(flags != 0)) {
#ifdef CONFIG_USER_ONLY
g_assert_not_reached();
#else
/*
- * At least one page includes MMIO (or watchpoints).
+ * At least one page includes MMIO.
* Any bus operation can fail with cpu_transaction_failed,
* which for ARM will raise SyncExternal. Perform the load
* into scratch memory to preserve register state until the end.
--
2.20.1
next prev parent reply other threads:[~2020-05-08 15:57 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 15:43 [PATCH v5 00/19] target/arm: sve load/store improvements Richard Henderson
2020-05-08 15:43 ` [PATCH v5 01/19] exec: Add block comments for watchpoint routines Richard Henderson
2020-05-08 15:43 ` [PATCH v5 02/19] exec: Fix cpu_watchpoint_address_matches address length Richard Henderson
2020-05-09 11:59 ` Philippe Mathieu-Daudé
2020-05-08 15:43 ` [PATCH v5 03/19] accel/tcg: Add block comment for probe_access Richard Henderson
2020-05-08 15:43 ` [PATCH v5 04/19] accel/tcg: Adjust probe_access call to page_check_range Richard Henderson
2020-05-08 16:13 ` Peter Maydell
2020-05-08 16:57 ` Richard Henderson
2020-05-11 10:19 ` Peter Maydell
2020-05-08 15:43 ` [PATCH v5 05/19] accel/tcg: Add probe_access_flags Richard Henderson
2020-05-08 15:43 ` [PATCH v5 06/19] accel/tcg: Add endian-specific cpu_{ld, st}* operations Richard Henderson
2020-05-08 15:43 ` [PATCH v5 07/19] target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn Richard Henderson
2020-05-08 15:43 ` [PATCH v5 08/19] target/arm: Drop manual handling of set/clear_helper_retaddr Richard Henderson
2020-05-08 15:43 ` [PATCH v5 09/19] target/arm: Add sve infrastructure for page lookup Richard Henderson
2020-05-08 15:43 ` [PATCH v5 10/19] target/arm: Adjust interface of sve_ld1_host_fn Richard Henderson
2020-05-08 15:43 ` [PATCH v5 11/19] target/arm: Use SVEContLdSt in sve_ld1_r Richard Henderson
2020-05-08 15:43 ` Richard Henderson [this message]
2020-05-08 15:43 ` [PATCH v5 13/19] target/arm: Use SVEContLdSt for multi-register contiguous loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 14/19] target/arm: Update contiguous first-fault and no-fault loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 15/19] target/arm: Use SVEContLdSt for contiguous stores Richard Henderson
2020-05-08 15:43 ` [PATCH v5 16/19] target/arm: Reuse sve_probe_page for gather first-fault loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 17/19] target/arm: Reuse sve_probe_page for scatter stores Richard Henderson
2020-05-08 15:43 ` [PATCH v5 18/19] target/arm: Reuse sve_probe_page for gather loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 19/19] target/arm: Remove sve_memopidx Richard Henderson
2020-05-09 1:45 ` [PATCH v5 00/19] target/arm: sve load/store improvements no-reply
2020-05-09 9:02 ` no-reply
2020-05-11 10:35 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508154359.7494-13-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).