From: Collin Walling <walling@linux.ibm.com>
To: qemu-devel@nongnu.org, qemu-s390x@nongnu.org
Cc: frankja@linux.ibm.com, david@redhat.com, cohuck@redhat.com,
pasic@linux.ibm.com, borntraeger@de.ibm.com, mst@redhat.com,
svens@linux.ibm.com, pbonzini@redhat.com, mihajlov@linux.ibm.com,
rth@twiddle.net
Subject: [PATCH v1 3/8] s390/sclp: rework sclp boundary and length checks
Date: Fri, 8 May 2020 19:08:18 -0400 [thread overview]
Message-ID: <20200508230823.22956-4-walling@linux.ibm.com> (raw)
In-Reply-To: <20200508230823.22956-1-walling@linux.ibm.com>
Let's factor out the SCLP boundary and length checks
into separate functions.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
---
hw/s390x/sclp.c | 41 +++++++++++++++++++++++++++++++++++------
1 file changed, 35 insertions(+), 6 deletions(-)
diff --git a/hw/s390x/sclp.c b/hw/s390x/sclp.c
index d08a291e40..470d5da7a2 100644
--- a/hw/s390x/sclp.c
+++ b/hw/s390x/sclp.c
@@ -49,6 +49,34 @@ static inline bool sclp_command_code_valid(uint32_t code)
return false;
}
+static bool check_sccb_boundary_valid(uint64_t sccb_addr, uint32_t code,
+ SCCB *sccb)
+{
+ uint64_t current_len = sccb_addr + be16_to_cpu(sccb->h.length);
+ uint64_t allowed_len = (sccb_addr & PAGE_MASK) + PAGE_SIZE;
+
+ switch (code & SCLP_CMD_CODE_MASK) {
+ default:
+ if (current_len <= allowed_len) {
+ return true;
+ }
+ }
+ sccb->h.response_code = cpu_to_be16(SCLP_RC_SCCB_BOUNDARY_VIOLATION);
+ return false;
+}
+
+static bool check_sufficient_sccb_len(SCCB *sccb, int size)
+{
+ MachineState *ms = MACHINE(qdev_get_machine());
+ int required_len = size + ms->possible_cpus->len * sizeof(CPUEntry);
+
+ if (be16_to_cpu(sccb->h.length) < required_len) {
+ sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
+ return false;
+ }
+ return true;
+}
+
static void prepare_cpu_entries(CPUEntry *entry, int *count)
{
MachineState *ms = MACHINE(qdev_get_machine());
@@ -76,8 +104,7 @@ static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb)
int rnsize, rnmax;
IplParameterBlock *ipib = s390_ipl_get_iplb();
- if (be16_to_cpu(sccb->h.length) < (sizeof(ReadInfo) + cpu_count * sizeof(CPUEntry))) {
- sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
+ if (!check_sufficient_sccb_len(sccb, sizeof(ReadInfo))) {
return;
}
@@ -134,8 +161,7 @@ static void sclp_read_cpu_info(SCLPDevice *sclp, SCCB *sccb)
ReadCpuInfo *cpu_info = (ReadCpuInfo *) sccb;
int cpu_count;
- if (be16_to_cpu(sccb->h.length) < (sizeof(ReadCpuInfo) + cpu_count * sizeof(CPUEntry))) {
- sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
+ if (!check_sufficient_sccb_len(sccb, sizeof(ReadCpuInfo))) {
return;
}
@@ -227,6 +253,10 @@ int sclp_service_call_protected(CPUS390XState *env, uint64_t sccb,
goto out_write;
}
+ if (!check_sccb_boundary_valid(sccb, code, &work_sccb)) {
+ goto out_write;
+ }
+
sclp_c->execute(sclp, &work_sccb, code);
out_write:
s390_cpu_pv_mem_write(env_archcpu(env), 0, &work_sccb,
@@ -272,8 +302,7 @@ int sclp_service_call(CPUS390XState *env, uint64_t sccb, uint32_t code)
goto out_write;
}
- if ((sccb + be16_to_cpu(work_sccb.h.length)) > ((sccb & PAGE_MASK) + PAGE_SIZE)) {
- work_sccb.h.response_code = cpu_to_be16(SCLP_RC_SCCB_BOUNDARY_VIOLATION);
+ if (!check_sccb_boundary_valid(sccb, code, &work_sccb)) {
goto out_write;
}
--
2.21.1
next prev parent reply other threads:[~2020-05-08 23:13 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 23:08 [PATCH v1 0/8] s390: Extended-Length SCCB & DIAGNOSE 0x318 Collin Walling
2020-05-08 23:08 ` [PATCH v1 1/8] s390/sclp: remove SCLPDevice param from prepare_cpu_entries Collin Walling
2020-05-11 14:37 ` Janosch Frank
2020-05-12 7:17 ` David Hildenbrand
2020-05-08 23:08 ` [PATCH v1 2/8] s390/sclp: check sccb len before filling in data Collin Walling
2020-05-11 14:36 ` Janosch Frank
2020-05-11 14:44 ` David Hildenbrand
2020-05-11 14:47 ` Collin Walling
2020-05-11 14:50 ` Janosch Frank
2020-05-11 15:02 ` David Hildenbrand
2020-05-12 16:01 ` Cornelia Huck
2020-05-12 16:16 ` Collin Walling
2020-05-12 16:24 ` Cornelia Huck
2020-05-12 16:25 ` Collin Walling
2020-05-13 7:43 ` Janosch Frank
2020-05-13 8:16 ` Cornelia Huck
2020-05-14 17:22 ` Collin Walling
2020-05-18 11:43 ` David Hildenbrand
2020-05-08 23:08 ` Collin Walling [this message]
2020-05-12 7:21 ` [PATCH v1 3/8] s390/sclp: rework sclp boundary and length checks David Hildenbrand
2020-05-12 14:55 ` Collin Walling
2020-05-13 7:00 ` Cornelia Huck
2020-05-14 17:23 ` Collin Walling
2020-05-08 23:08 ` [PATCH v1 4/8] s390/sclp: read sccb from mem based on sccb length Collin Walling
2020-05-12 7:26 ` David Hildenbrand
2020-05-12 14:46 ` Collin Walling
2020-05-08 23:08 ` [PATCH v1 5/8] s390/sclp: use cpu offset to locate cpu entries Collin Walling
2020-05-08 23:08 ` [PATCH v1 6/8] s390/sclp: add extended-length sccb support for kvm guest Collin Walling
2020-05-08 23:08 ` [PATCH v1 7/8] s390/kvm: header sync for diag318 Collin Walling
2020-05-13 7:05 ` Cornelia Huck
2020-05-13 22:44 ` Collin Walling
2020-05-08 23:08 ` [PATCH v1 8/8] s390: diagnose 318 info reset and migration support Collin Walling
2020-05-09 8:07 ` [PATCH v1 0/8] s390: Extended-Length SCCB & DIAGNOSE 0x318 no-reply
2020-05-12 16:08 ` Cornelia Huck
2020-05-12 16:20 ` Collin Walling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508230823.22956-4-walling@linux.ibm.com \
--to=walling@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=mihajlov@linux.ibm.com \
--cc=mst@redhat.com \
--cc=pasic@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=rth@twiddle.net \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).