From: "Michael S. Tsirkin" <mst@redhat.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: shahafs@mellanox.com, lulu@redhat.com, jasowang@redhat.com,
qemu-devel@nongnu.org, amorenoz@redhat.com, matan@mellanox.com
Subject: Re: [PATCH] vhost-user: add support for VHOST_USER_SET_STATUS
Date: Thu, 14 May 2020 06:44:43 -0400 [thread overview]
Message-ID: <20200514064306-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20200514073332.1434576-1-maxime.coquelin@redhat.com>
On Thu, May 14, 2020 at 09:33:32AM +0200, Maxime Coquelin wrote:
> It is usefull for the Vhost-user backend to know
> about about the Virtio device status updates,
> especially when the driver sets the DRIVER_OK bit.
>
> With that information, no more need to do hazardous
> assumptions on when the driver is done with the
> device configuration.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
>
> This patch applies on top of Cindy's "vDPA support in qemu"
> series, which introduces the .vhost_set_state vhost-backend
> ops.
>
> docs/interop/vhost-user.rst | 12 ++++++++++++
> hw/net/vhost_net.c | 10 +++++-----
> hw/virtio/vhost-user.c | 35 +++++++++++++++++++++++++++++++++++
> 3 files changed, 52 insertions(+), 5 deletions(-)
>
> diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst
> index 3b1b6602c7..f108de7458 100644
> --- a/docs/interop/vhost-user.rst
> +++ b/docs/interop/vhost-user.rst
> @@ -815,6 +815,7 @@ Protocol features
> #define VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD 12
> #define VHOST_USER_PROTOCOL_F_RESET_DEVICE 13
> #define VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS 14
> + #define VHOST_USER_PROTOCOL_F_STATUS 15
>
> Master message types
> --------------------
> @@ -1263,6 +1264,17 @@ Master message types
>
> The state.num field is currently reserved and must be set to 0.
>
> +``VHOST_USER_SET_STATUS``
> + :id: 36
> + :equivalent ioctl: VHOST_VDPA_SET_STATUS
> + :slave payload: N/A
> + :master payload: ``u64``
> +
> + When the ``VHOST_USER_PROTOCOL_F_STATUS`` protocol feature has been
> + successfully negotiated, this message is submitted by the master to
> + notify the backend with updated device status as defined in the Virtio
> + specification.
> +
> Slave message types
> -------------------
>
> diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
> index 463e333531..37f3156dbc 100644
> --- a/hw/net/vhost_net.c
> +++ b/hw/net/vhost_net.c
> @@ -517,10 +517,10 @@ int vhost_set_state(NetClientState *nc, int state)
> {
> struct vhost_net *net = get_vhost_net(nc);
> struct vhost_dev *hdev = &net->dev;
> - if (nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
> - if (hdev->vhost_ops->vhost_set_state) {
> - return hdev->vhost_ops->vhost_set_state(hdev, state);
> - }
> - }
> +
> + if (hdev->vhost_ops->vhost_set_state) {
> + return hdev->vhost_ops->vhost_set_state(hdev, state);
> + }
> +
> return 0;
> }
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index ec21e8fbe8..b7e52d97fc 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -59,6 +59,7 @@ enum VhostUserProtocolFeature {
> VHOST_USER_PROTOCOL_F_HOST_NOTIFIER = 11,
> VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD = 12,
> VHOST_USER_PROTOCOL_F_RESET_DEVICE = 13,
> + VHOST_USER_PROTOCOL_F_STATUS = 15,
> VHOST_USER_PROTOCOL_F_MAX
> };
>
> @@ -100,6 +101,7 @@ typedef enum VhostUserRequest {
> VHOST_USER_SET_INFLIGHT_FD = 32,
> VHOST_USER_GPU_SET_SOCKET = 33,
> VHOST_USER_RESET_DEVICE = 34,
> + VHOST_USER_SET_STATUS = 36,
> VHOST_USER_MAX
> } VhostUserRequest;
>
> @@ -1886,6 +1888,38 @@ static int vhost_user_set_inflight_fd(struct vhost_dev *dev,
> return 0;
> }
>
> +static int vhost_user_set_state(struct vhost_dev *dev, int state)
> +{
> + bool reply_supported = virtio_has_feature(dev->protocol_features,
> + VHOST_USER_PROTOCOL_F_REPLY_ACK);
> +
> + VhostUserMsg msg = {
> + .hdr.request = VHOST_USER_SET_STATUS,
> + .hdr.flags = VHOST_USER_VERSION,
> + .hdr.size = sizeof(msg.payload.u64),
> + .payload.u64 = (uint64_t)state,
> + };
> +
> + if (!virtio_has_feature(dev->protocol_features,
> + VHOST_USER_PROTOCOL_F_STATUS)) {
> + return -1;
> + }
> +
> + if (reply_supported) {
> + msg.hdr.flags |= VHOST_USER_NEED_REPLY_MASK;
> + }
> +
> + if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> + return -1;
> + }
> +
> + if (reply_supported) {
> + return process_message_reply(dev, &msg);
> + }
So since we are doing this anyway, let's give backend the
opportunity to validate features and fail FEATURES_OK?
> +
> + return 0;
> +}
> +
> bool vhost_user_init(VhostUserState *user, CharBackend *chr, Error **errp)
> {
> if (user->chr) {
> @@ -1947,4 +1981,5 @@ const VhostOps user_ops = {
> .vhost_backend_mem_section_filter = vhost_user_mem_section_filter,
> .vhost_get_inflight_fd = vhost_user_get_inflight_fd,
> .vhost_set_inflight_fd = vhost_user_set_inflight_fd,
> + .vhost_set_state = vhost_user_set_state,
> };
> --
> 2.25.4
next prev parent reply other threads:[~2020-05-14 10:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 7:33 [PATCH] vhost-user: add support for VHOST_USER_SET_STATUS Maxime Coquelin
2020-05-14 7:53 ` Jason Wang
2020-05-14 10:14 ` Maxime Coquelin
2020-05-14 10:51 ` Michael S. Tsirkin
2020-05-14 14:39 ` Maxime Coquelin
2020-05-14 14:48 ` Michael S. Tsirkin
2020-05-14 16:29 ` Maxime Coquelin
2020-05-15 3:53 ` Jason Wang
2020-05-14 10:44 ` Michael S. Tsirkin [this message]
2020-05-14 14:12 ` Maxime Coquelin
2020-05-14 14:20 ` Michael S. Tsirkin
2020-05-14 15:38 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200514064306-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=amorenoz@redhat.com \
--cc=jasowang@redhat.com \
--cc=lulu@redhat.com \
--cc=matan@mellanox.com \
--cc=maxime.coquelin@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=shahafs@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).