From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org
Subject: [RISU v2 11/17] Always write for --master
Date: Mon, 18 May 2020 19:53:49 -0700 [thread overview]
Message-ID: <20200519025355.4420-12-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200519025355.4420-1-richard.henderson@linaro.org>
For trace, master of course must write to the file we create.
For sockets, we can report mismatches from either end. At present,
we are reporting mismatches from master. Reverse that so that we
report mismatches from the apprentice, just as we do for trace.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
risu.h | 2 +-
reginfo.c | 38 ++++++++--------------
risu.c | 96 ++++++++++++++++++++++++++-----------------------------
3 files changed, 61 insertions(+), 75 deletions(-)
diff --git a/risu.h b/risu.h
index f44b781..2ded5c4 100644
--- a/risu.h
+++ b/risu.h
@@ -111,7 +111,7 @@ RisuResult recv_and_compare_register_info(void *uc);
* Should return 0 if it was a good match (ie end of test)
* and 1 for a mismatch.
*/
-int report_match_status(bool trace);
+int report_match_status(void);
/* Interface provided by CPU-specific code: */
diff --git a/reginfo.c b/reginfo.c
index fee025e..c37c5df 100644
--- a/reginfo.c
+++ b/reginfo.c
@@ -14,9 +14,8 @@
#include <stdlib.h>
#include "risu.h"
-struct reginfo master_ri, apprentice_ri;
-
-uint8_t apprentice_memblock[MEMBLOCKLEN];
+static struct reginfo master_ri, apprentice_ri;
+static uint8_t master_memblock[MEMBLOCKLEN];
static int mem_used;
static int packet_mismatch;
@@ -82,8 +81,8 @@ RisuResult recv_and_compare_register_info(void *uc)
trace_header_t header;
RisuOp op;
- reginfo_init(&master_ri, uc);
- op = get_risuop(&master_ri);
+ reginfo_init(&apprentice_ri, uc);
+ op = get_risuop(&apprentice_ri);
res = read_buffer(&header, sizeof(header));
if (res != RES_OK) {
@@ -107,7 +106,7 @@ RisuResult recv_and_compare_register_info(void *uc)
/* Do a simple register compare on (a) explicit request
* (b) end of test (c) a non-risuop UNDEF
*/
- res = read_buffer(&apprentice_ri, reginfo_size());
+ res = read_buffer(&master_ri, reginfo_size());
if (res != RES_OK) {
packet_mismatch = 1;
} else if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
@@ -119,18 +118,18 @@ RisuResult recv_and_compare_register_info(void *uc)
respond(res);
break;
case OP_SETMEMBLOCK:
- memblock = (void *)(uintptr_t)get_reginfo_paramreg(&master_ri);
+ memblock = (void *)(uintptr_t)get_reginfo_paramreg(&apprentice_ri);
break;
case OP_GETMEMBLOCK:
- set_ucontext_paramreg(uc, get_reginfo_paramreg(&master_ri) +
+ set_ucontext_paramreg(uc, get_reginfo_paramreg(&apprentice_ri) +
(uintptr_t)memblock);
break;
case OP_COMPAREMEM:
mem_used = 1;
- res = read_buffer(apprentice_memblock, MEMBLOCKLEN);
+ res = read_buffer(master_memblock, MEMBLOCKLEN);
if (res != RES_OK) {
packet_mismatch = 1;
- } else if (memcmp(memblock, apprentice_memblock, MEMBLOCKLEN) != 0) {
+ } else if (memcmp(memblock, master_memblock, MEMBLOCKLEN) != 0) {
/* memory mismatch */
res = RES_MISMATCH;
}
@@ -149,18 +148,13 @@ RisuResult recv_and_compare_register_info(void *uc)
* Should return 0 if it was a good match (ie end of test)
* and 1 for a mismatch.
*/
-int report_match_status(bool trace)
+int report_match_status(void)
{
int resp = 0;
fprintf(stderr, "match status...\n");
if (packet_mismatch) {
fprintf(stderr, "packet mismatch (probably disagreement "
"about UNDEF on load/store)\n");
- /* We don't have valid reginfo from the apprentice side
- * so stop now rather than printing anything about it.
- */
- fprintf(stderr, "%s reginfo:\n", trace ? "this" : "master");
- reginfo_dump(&master_ri, stderr);
return 1;
}
if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
@@ -168,7 +162,7 @@ int report_match_status(bool trace)
resp = 1;
}
if (mem_used
- && memcmp(memblock, &apprentice_memblock, MEMBLOCKLEN) != 0) {
+ && memcmp(memblock, &master_memblock, MEMBLOCKLEN) != 0) {
fprintf(stderr, "mismatch on memory!\n");
resp = 1;
}
@@ -177,15 +171,11 @@ int report_match_status(bool trace)
return 0;
}
- fprintf(stderr, "%s reginfo:\n", trace ? "this" : "master");
+ fprintf(stderr, "master reginfo:\n");
reginfo_dump(&master_ri, stderr);
- fprintf(stderr, "%s reginfo:\n", trace ? "trace" : "apprentice");
+ fprintf(stderr, "apprentice reginfo:\n");
reginfo_dump(&apprentice_ri, stderr);
- if (trace) {
- reginfo_dump_mismatch(&apprentice_ri, &master_ri, stderr);
- } else {
- reginfo_dump_mismatch(&master_ri, &apprentice_ri, stderr);
- }
+ reginfo_dump_mismatch(&master_ri, &apprentice_ri, stderr);
return resp;
}
diff --git a/risu.c b/risu.c
index d09ac0b..ea4b4d3 100644
--- a/risu.c
+++ b/risu.c
@@ -102,11 +102,7 @@ static void master_sigill(int sig, siginfo_t *si, void *uc)
RisuResult r;
signal_count++;
- if (trace) {
- r = send_register_info(uc);
- } else {
- r = recv_and_compare_register_info(uc);
- }
+ r = send_register_info(uc);
if (r == RES_OK) {
advance_pc(uc);
} else {
@@ -119,11 +115,7 @@ static void apprentice_sigill(int sig, siginfo_t *si, void *uc)
RisuResult r;
signal_count++;
- if (trace) {
- r = recv_and_compare_register_info(uc);
- } else {
- r = send_register_info(uc);
- }
+ r = recv_and_compare_register_info(uc);
if (r == RES_OK) {
advance_pc(uc);
} else {
@@ -186,61 +178,65 @@ static int master(void)
{
RisuResult res = sigsetjmp(jmpbuf, 1);
- if (res != RES_OK) {
+ switch (res) {
+ case RES_OK:
+ set_sigill_handler(&master_sigill);
+ fprintf(stderr, "starting master image at 0x%"PRIxPTR"\n",
+ image_start_address);
+ fprintf(stderr, "starting image\n");
+ image_start();
+ fprintf(stderr, "image returned unexpectedly\n");
+ return EXIT_FAILURE;
+
+ case RES_END:
#ifdef HAVE_ZLIB
if (trace && comm_fd != STDOUT_FILENO) {
gzclose(gz_trace_file);
}
#endif
close(comm_fd);
- if (trace) {
- fprintf(stderr, "trace complete after %zd checkpoints\n",
- signal_count);
- return EXIT_SUCCESS;
- } else {
- return report_match_status(false);
- }
+ return EXIT_SUCCESS;
+
+ case RES_BAD_IO:
+ fprintf(stderr, "i/o error after %zd checkpoints\n", signal_count);
+ return EXIT_FAILURE;
+
+ default:
+ fprintf(stderr, "unexpected result %d\n", res);
+ return EXIT_FAILURE;
}
- set_sigill_handler(&master_sigill);
- fprintf(stderr, "starting master image at 0x%"PRIxPTR"\n",
- image_start_address);
- fprintf(stderr, "starting image\n");
- image_start();
- fprintf(stderr, "image returned unexpectedly\n");
- return EXIT_FAILURE;
}
static int apprentice(void)
{
RisuResult res = sigsetjmp(jmpbuf, 1);
- if (res != RES_OK) {
-#ifdef HAVE_ZLIB
- if (trace && comm_fd != STDIN_FILENO) {
- gzclose(gz_trace_file);
- }
-#endif
- close(comm_fd);
+ switch (res) {
+ case RES_OK:
+ set_sigill_handler(&apprentice_sigill);
+ fprintf(stderr, "starting apprentice image at 0x%"PRIxPTR"\n",
+ image_start_address);
+ fprintf(stderr, "starting image\n");
+ image_start();
+ fprintf(stderr, "image returned unexpectedly\n");
+ return EXIT_FAILURE;
- switch (res) {
- case RES_END:
- return EXIT_SUCCESS;
- default:
- if (!trace) {
- return EXIT_FAILURE;
- }
- fprintf(stderr, "finished early after %zd checkpoints\n",
- signal_count);
- return report_match_status(true);
- }
+ case RES_END:
+ return EXIT_SUCCESS;
+
+ case RES_MISMATCH:
+ fprintf(stderr, "mismatch after %zd checkpoints\n", signal_count);
+ report_match_status();
+ return EXIT_FAILURE;
+
+ case RES_BAD_IO:
+ fprintf(stderr, "i/o error after %zd checkpoints\n", signal_count);
+ return EXIT_FAILURE;
+
+ default:
+ fprintf(stderr, "unexpected result %d\n", res);
+ return EXIT_FAILURE;
}
- set_sigill_handler(&apprentice_sigill);
- fprintf(stderr, "starting apprentice image at 0x%"PRIxPTR"\n",
- image_start_address);
- fprintf(stderr, "starting image\n");
- image_start();
- fprintf(stderr, "image returned unexpectedly\n");
- return EXIT_FAILURE;
}
static int ismaster;
--
2.20.1
next prev parent reply other threads:[~2020-05-19 2:59 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 2:53 [RISU v2 00/17] risu cleanups and improvements Richard Henderson
2020-05-19 2:53 ` [RISU v2 01/17] Use bool for tracing variables Richard Henderson
2020-05-19 15:52 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 02/17] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2020-05-19 15:52 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 03/17] Hoist trace file opening Richard Henderson
2020-05-19 16:50 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 04/17] Adjust tracefile open for write Richard Henderson
2020-05-19 18:24 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 05/17] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2020-05-19 18:24 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 06/17] Make some risu.c symbols static Richard Henderson
2020-05-19 18:25 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 07/17] Add enum RisuOp Richard Henderson
2020-05-19 18:39 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 08/17] Add enum RisuResult Richard Henderson
2020-05-19 19:06 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 09/17] Unify i/o functions and use RisuResult Richard Henderson
2020-05-20 15:50 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 10/17] Pass non-OK result back through siglongjmp Richard Henderson
2020-05-20 15:52 ` Alex Bennée
2020-05-19 2:53 ` Richard Henderson [this message]
2020-05-20 16:12 ` [RISU v2 11/17] Always write for --master Alex Bennée
2020-05-19 2:53 ` [RISU v2 12/17] Simplify syncing with master Richard Henderson
2020-05-20 16:14 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 13/17] Split RES_MISMATCH for registers and memory Richard Henderson
2020-05-20 16:25 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 14/17] Add magic and size to the trace header Richard Henderson
2020-05-19 21:16 ` Richard Henderson
2020-05-20 16:59 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 15/17] Compute reginfo_size based on the reginfo Richard Henderson
2020-05-20 17:30 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 16/17] aarch64: Reorg sve reginfo to save space Richard Henderson
2020-05-20 18:43 ` Alex Bennée
2020-05-19 2:53 ` [RISU v2 17/17] Add --dump option to inspect trace files Richard Henderson
2020-05-20 17:49 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200519025355.4420-12-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).