qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org
Subject: [RISU v2 13/17] Split RES_MISMATCH for registers and memory
Date: Mon, 18 May 2020 19:53:51 -0700	[thread overview]
Message-ID: <20200519025355.4420-14-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200519025355.4420-1-richard.henderson@linaro.org>

By remembering the specific comparison that failed, we do not
have to try again when it comes time to report.  This makes
the mem_used flag redundant.  Also, packet_mismatch is now
redundant with RES_BAD_IO.

This means that the only thing that report_match_status does
is to report on register status, so rename to report_mismatch_reg.
Also, we know there is a failure, so don't return a status from
the report.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 risu.h    | 13 ++++++-------
 reginfo.c | 45 ++++++++-------------------------------------
 risu.c    | 10 +++++++---
 3 files changed, 21 insertions(+), 47 deletions(-)

diff --git a/risu.h b/risu.h
index 2ded5c4..b234f93 100644
--- a/risu.h
+++ b/risu.h
@@ -54,7 +54,8 @@ typedef enum {
 typedef enum {
     RES_OK = 0,
     RES_END,
-    RES_MISMATCH,
+    RES_MISMATCH_REG,
+    RES_MISMATCH_MEM,
     RES_BAD_IO,
 } RisuResult;
 
@@ -105,13 +106,11 @@ RisuResult send_register_info(void *uc);
  */
 RisuResult recv_and_compare_register_info(void *uc);
 
-/* Print a useful report on the status of the last comparison
- * done in recv_and_compare_register_info(). This is called on
- * exit, so need not restrict itself to signal-safe functions.
- * Should return 0 if it was a good match (ie end of test)
- * and 1 for a mismatch.
+/*
+ * Print a useful report on the status of the last reg comparison
+ * done in recv_and_compare_register_info().
  */
-int report_match_status(void);
+void report_mismatch_reg(void);
 
 /* Interface provided by CPU-specific code: */
 
diff --git a/reginfo.c b/reginfo.c
index 31bc699..a007f16 100644
--- a/reginfo.c
+++ b/reginfo.c
@@ -17,9 +17,6 @@
 static struct reginfo master_ri, apprentice_ri;
 static uint8_t master_memblock[MEMBLOCKLEN];
 
-static int mem_used;
-static int packet_mismatch;
-
 RisuResult send_register_info(void *uc)
 {
     struct reginfo ri;
@@ -107,10 +104,10 @@ RisuResult recv_and_compare_register_info(void *uc)
          */
         res = read_buffer(&master_ri, reginfo_size());
         if (res != RES_OK) {
-            packet_mismatch = 1;
+            /* fail */
         } else if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
             /* register mismatch */
-            res = RES_MISMATCH;
+            res = RES_MISMATCH_REG;
         } else if (op == OP_TESTEND) {
             res = RES_END;
         }
@@ -124,13 +121,12 @@ RisuResult recv_and_compare_register_info(void *uc)
                               (uintptr_t)memblock);
         break;
     case OP_COMPAREMEM:
-        mem_used = 1;
         res = read_buffer(master_memblock, MEMBLOCKLEN);
         if (res != RES_OK) {
-            packet_mismatch = 1;
+            /* fail */
         } else if (memcmp(memblock, master_memblock, MEMBLOCKLEN) != 0) {
             /* memory mismatch */
-            res = RES_MISMATCH;
+            res = RES_MISMATCH_MEM;
         }
         respond(res == RES_OK ? RES_OK : RES_END);
         break;
@@ -141,40 +137,15 @@ RisuResult recv_and_compare_register_info(void *uc)
     return res;
 }
 
-/* Print a useful report on the status of the last comparison
- * done in recv_and_compare_register_info(). This is called on
- * exit, so need not restrict itself to signal-safe functions.
- * Should return 0 if it was a good match (ie end of test)
- * and 1 for a mismatch.
+/*
+ * Print a useful report on the status of the last reg comparison
+ * done in recv_and_compare_register_info().
  */
-int report_match_status(void)
+void report_mismatch_reg(void)
 {
-    int resp = 0;
-    fprintf(stderr, "match status...\n");
-    if (packet_mismatch) {
-        fprintf(stderr, "packet mismatch (probably disagreement "
-                "about UNDEF on load/store)\n");
-        return 1;
-    }
-    if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
-        fprintf(stderr, "mismatch on regs!\n");
-        resp = 1;
-    }
-    if (mem_used
-        && memcmp(memblock, &master_memblock, MEMBLOCKLEN) != 0) {
-        fprintf(stderr, "mismatch on memory!\n");
-        resp = 1;
-    }
-    if (!resp) {
-        fprintf(stderr, "match!\n");
-        return 0;
-    }
-
     fprintf(stderr, "master reginfo:\n");
     reginfo_dump(&master_ri, stderr);
     fprintf(stderr, "apprentice reginfo:\n");
     reginfo_dump(&apprentice_ri, stderr);
-
     reginfo_dump_mismatch(&master_ri, &apprentice_ri, stderr);
-    return resp;
 }
diff --git a/risu.c b/risu.c
index ea4b4d3..398faac 100644
--- a/risu.c
+++ b/risu.c
@@ -224,9 +224,13 @@ static int apprentice(void)
     case RES_END:
         return EXIT_SUCCESS;
 
-    case RES_MISMATCH:
-        fprintf(stderr, "mismatch after %zd checkpoints\n", signal_count);
-        report_match_status();
+    case RES_MISMATCH_REG:
+        fprintf(stderr, "mismatch reg after %zd checkpoints\n", signal_count);
+        report_mismatch_reg();
+        return EXIT_FAILURE;
+
+    case RES_MISMATCH_MEM:
+        fprintf(stderr, "mismatch mem after %zd checkpoints\n", signal_count);
         return EXIT_FAILURE;
 
     case RES_BAD_IO:
-- 
2.20.1



  parent reply	other threads:[~2020-05-19  2:59 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19  2:53 [RISU v2 00/17] risu cleanups and improvements Richard Henderson
2020-05-19  2:53 ` [RISU v2 01/17] Use bool for tracing variables Richard Henderson
2020-05-19 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 02/17] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2020-05-19 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 03/17] Hoist trace file opening Richard Henderson
2020-05-19 16:50   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 04/17] Adjust tracefile open for write Richard Henderson
2020-05-19 18:24   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 05/17] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2020-05-19 18:24   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 06/17] Make some risu.c symbols static Richard Henderson
2020-05-19 18:25   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 07/17] Add enum RisuOp Richard Henderson
2020-05-19 18:39   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 08/17] Add enum RisuResult Richard Henderson
2020-05-19 19:06   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 09/17] Unify i/o functions and use RisuResult Richard Henderson
2020-05-20 15:50   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 10/17] Pass non-OK result back through siglongjmp Richard Henderson
2020-05-20 15:52   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 11/17] Always write for --master Richard Henderson
2020-05-20 16:12   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 12/17] Simplify syncing with master Richard Henderson
2020-05-20 16:14   ` Alex Bennée
2020-05-19  2:53 ` Richard Henderson [this message]
2020-05-20 16:25   ` [RISU v2 13/17] Split RES_MISMATCH for registers and memory Alex Bennée
2020-05-19  2:53 ` [RISU v2 14/17] Add magic and size to the trace header Richard Henderson
2020-05-19 21:16   ` Richard Henderson
2020-05-20 16:59     ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 15/17] Compute reginfo_size based on the reginfo Richard Henderson
2020-05-20 17:30   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 16/17] aarch64: Reorg sve reginfo to save space Richard Henderson
2020-05-20 18:43   ` Alex Bennée
2020-05-19  2:53 ` [RISU v2 17/17] Add --dump option to inspect trace files Richard Henderson
2020-05-20 17:49   ` Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519025355.4420-14-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).