qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Roman Kagan <rvkagan@yandex-team.ru>
To: qemu-devel@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Daniel P. Berrangé" <berrange@redhat.com>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	qemu-block@nongnu.org
Subject: Re: [PATCH v3] block: make BlockConf.*_size properties 32-bit
Date: Tue, 19 May 2020 10:17:30 +0300	[thread overview]
Message-ID: <20200519071730.GA742108@rvkaganb.lan> (raw)
In-Reply-To: <20200429091813.1469510-1-rvkagan@yandex-team.ru>

On Wed, Apr 29, 2020 at 12:18:13PM +0300, Roman Kagan wrote:
> Devices (virtio-blk, scsi, etc.) and the block layer are happy to use
> 32-bit for logical_block_size, physical_block_size, and min_io_size.
> However, the properties in BlockConf are defined as uint16_t limiting
> the values to 32768.
> 
> This appears unnecessary tight, and we've seen bigger block sizes handy
> at times.
> 
> Make them 32 bit instead and lift the limitation up to 2 MiB which
> appears to be good enough for everybody, and matches the qcow2 cluster
> size limit.
> 
> As the values can now be fairly big and awkward to type, make the
> property setter accept common size suffixes (k, m).
> 
> Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
> v2 -> v3:
> - mention qcow2 cluster size limit in the log and comment [Eric]
> 
> v1 -> v2:
> - cap the property at 2 MiB [Eric]
> - accept size suffixes
> 
>  include/hw/block/block.h     |  8 ++++----
>  include/hw/qdev-properties.h |  2 +-
>  hw/core/qdev-properties.c    | 34 ++++++++++++++++++++++++----------
>  3 files changed, 29 insertions(+), 15 deletions(-)
> 
> diff --git a/include/hw/block/block.h b/include/hw/block/block.h
> index d7246f3862..9dd6bba56a 100644
> --- a/include/hw/block/block.h
> +++ b/include/hw/block/block.h
> @@ -18,9 +18,9 @@
>  
>  typedef struct BlockConf {
>      BlockBackend *blk;
> -    uint16_t physical_block_size;
> -    uint16_t logical_block_size;
> -    uint16_t min_io_size;
> +    uint32_t physical_block_size;
> +    uint32_t logical_block_size;
> +    uint32_t min_io_size;
>      uint32_t opt_io_size;
>      int32_t bootindex;
>      uint32_t discard_granularity;
> @@ -51,7 +51,7 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf)
>                            _conf.logical_block_size),                    \
>      DEFINE_PROP_BLOCKSIZE("physical_block_size", _state,                \
>                            _conf.physical_block_size),                   \
> -    DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0),    \
> +    DEFINE_PROP_UINT32("min_io_size", _state, _conf.min_io_size, 0),    \
>      DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0),    \
>      DEFINE_PROP_UINT32("discard_granularity", _state,                   \
>                         _conf.discard_granularity, -1),                  \
> diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
> index f161604fb6..f9e0f8c041 100644
> --- a/include/hw/qdev-properties.h
> +++ b/include/hw/qdev-properties.h
> @@ -197,7 +197,7 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
>  #define DEFINE_PROP_BIOS_CHS_TRANS(_n, _s, _f, _d) \
>      DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_bios_chs_trans, int)
>  #define DEFINE_PROP_BLOCKSIZE(_n, _s, _f) \
> -    DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint16_t)
> +    DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint32_t)
>  #define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
>      DEFINE_PROP(_n, _s, _f, qdev_prop_pci_host_devaddr, PCIHostDeviceAddress)
>  #define DEFINE_PROP_OFF_AUTO_PCIBAR(_n, _s, _f, _d) \
> diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
> index 2047114fca..e673f3c43f 100644
> --- a/hw/core/qdev-properties.c
> +++ b/hw/core/qdev-properties.c
> @@ -14,6 +14,7 @@
>  #include "qapi/visitor.h"
>  #include "chardev/char.h"
>  #include "qemu/uuid.h"
> +#include "qemu/units.h"
>  
>  void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
>                                    Error **errp)
> @@ -729,30 +730,42 @@ const PropertyInfo qdev_prop_pci_devfn = {
>  
>  /* --- blocksize --- */
>  
> +/* lower limit is sector size */
> +#define MIN_BLOCK_SIZE          512
> +#define MIN_BLOCK_SIZE_STR      "512 B"
> +/*
> + * upper limit is arbitrary, 2 MiB looks sufficient for all sensible uses, and
> + * matches qcow2 cluster size limit
> + */
> +#define MAX_BLOCK_SIZE          (2 * MiB)
> +#define MAX_BLOCK_SIZE_STR      "2 MiB"
> +
>  static void set_blocksize(Object *obj, Visitor *v, const char *name,
>                            void *opaque, Error **errp)
>  {
>      DeviceState *dev = DEVICE(obj);
>      Property *prop = opaque;
> -    uint16_t value, *ptr = qdev_get_prop_ptr(dev, prop);
> +    uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
> +    uint64_t value;
>      Error *local_err = NULL;
> -    const int64_t min = 512;
> -    const int64_t max = 32768;
>  
>      if (dev->realized) {
>          qdev_prop_set_after_realize(dev, name, errp);
>          return;
>      }
>  
> -    visit_type_uint16(v, name, &value, &local_err);
> +    visit_type_size(v, name, &value, &local_err);
>      if (local_err) {
>          error_propagate(errp, local_err);
>          return;
>      }
>      /* value of 0 means "unset" */
> -    if (value && (value < min || value > max)) {
> -        error_setg(errp, QERR_PROPERTY_VALUE_OUT_OF_RANGE,
> -                   dev->id ? : "", name, (int64_t)value, min, max);
> +    if (value && (value < MIN_BLOCK_SIZE || value > MAX_BLOCK_SIZE)) {
> +        error_setg(errp,
> +                   "Property %s.%s doesn't take value %" PRIu64
> +                   " (minimum: " MIN_BLOCK_SIZE_STR
> +                   ", maximum: " MAX_BLOCK_SIZE_STR ")",
> +                   dev->id ? : "", name, value);
>          return;
>      }
>  
> @@ -768,9 +781,10 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
>  }
>  
>  const PropertyInfo qdev_prop_blocksize = {
> -    .name  = "uint16",
> -    .description = "A power of two between 512 and 32768",
> -    .get   = get_uint16,
> +    .name  = "size",
> +    .description = "A power of two between " MIN_BLOCK_SIZE_STR
> +                   " and " MAX_BLOCK_SIZE_STR,
> +    .get   = get_uint32,
>      .set   = set_blocksize,
>      .set_default_value = set_default_value_uint,
>  };
> -- 
> 2.25.4

Ping?


  parent reply	other threads:[~2020-05-19  7:18 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-29  9:18 [PATCH v3] block: make BlockConf.*_size properties 32-bit Roman Kagan
2020-04-29  9:41 ` Philippe Mathieu-Daudé
2020-04-29 12:19   ` Roman Kagan
2020-04-29 12:59     ` Philippe Mathieu-Daudé
2020-04-30  9:25       ` Roman Kagan
2020-04-30  9:56         ` Philippe Mathieu-Daudé
2020-05-19  7:17 ` Roman Kagan [this message]
2020-05-19 14:08 ` Kevin Wolf
2020-05-19 18:23   ` Roman Kagan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519071730.GA742108@rvkaganb.lan \
    --to=rvkagan@yandex-team.ru \
    --cc=berrange@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).