From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: alex.bennee@linaro.org
Subject: [PATCH v3 23/25] Add --fulldump and --diffdup options
Date: Thu, 21 May 2020 19:34:38 -0700 [thread overview]
Message-ID: <20200522023440.26261-24-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200522023440.26261-1-richard.henderson@linaro.org>
These allow the inspection of the trace files.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
risu.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 102 insertions(+), 15 deletions(-)
diff --git a/risu.c b/risu.c
index f613fa9..8d907d9 100644
--- a/risu.c
+++ b/risu.c
@@ -484,23 +484,101 @@ static int apprentice(void)
}
}
-static int ismaster;
+static int dump_trace(bool isfull)
+{
+ RisuResult res;
+ int tick = 0;
+
+ while (1) {
+ struct reginfo *this_ri;
+
+ this_ri = &ri[tick & 1];
+ res = recv_register_info(this_ri);
+
+ switch (res) {
+ case RES_OK:
+ switch (header.risu_op) {
+ case OP_COMPARE:
+ case OP_TESTEND:
+ case OP_SIGILL:
+ printf("%s: (pc %#lx)\n", op_name(header.risu_op),
+ (unsigned long)header.pc);
+
+ if (isfull || tick == 0) {
+ reginfo_dump(this_ri, stdout);
+ } else {
+ struct reginfo *prev_ri = &ri[(tick - 1) & 1];
+
+ if (reginfo_is_eq(prev_ri, this_ri)) {
+ /*
+ * ??? There should never be no change -- at minimum
+ * PC should have advanced. But for completeness...
+ */
+ printf("change detail: none\n");
+ } else {
+ printf("change detail (prev : next):\n");
+ reginfo_dump_mismatch(prev_ri, this_ri, stdout);
+ }
+ }
+ putchar('\n');
+ if (header.risu_op == OP_TESTEND) {
+ return EXIT_SUCCESS;
+ }
+ tick++;
+ break;
+
+ case OP_COMPAREMEM:
+ /* TODO: Dump 8k of data? */
+ /* fall through */
+ default:
+ printf("%s\n", op_name(header.risu_op));
+ break;
+ }
+ break;
+
+ case RES_BAD_IO:
+ fprintf(stderr, "I/O error\n");
+ return EXIT_FAILURE;
+ case RES_BAD_MAGIC:
+ fprintf(stderr, "Unexpected magic number: %#08x\n", header.magic);
+ return EXIT_FAILURE;
+ case RES_BAD_SIZE:
+ fprintf(stderr, "Unexpected payload size: %u\n", header.size);
+ return EXIT_FAILURE;
+ case RES_BAD_OP:
+ fprintf(stderr, "Unexpected opcode: %d\n", header.risu_op);
+ return EXIT_FAILURE;
+ default:
+ fprintf(stderr, "Unexpected recv result %d\n", res);
+ return EXIT_FAILURE;
+ }
+ }
+}
+
+enum {
+ DO_APPRENTICE,
+ DO_MASTER,
+ DO_FULLDUMP,
+ DO_DIFFDUMP,
+};
+
+static int operation = DO_APPRENTICE;
static void usage(void)
{
fprintf(stderr,
- "Usage: risu [--master] [--host <ip>] [--port <port>] <image file>"
- "\n\n");
- fprintf(stderr,
- "Run through the pattern file verifying each instruction\n");
- fprintf(stderr, "between master and apprentice risu processes.\n\n");
- fprintf(stderr, "Options:\n");
- fprintf(stderr, " --master Be the master (server)\n");
- fprintf(stderr, " -t, --trace=FILE Record/playback " TRACE_TYPE " trace file\n");
- fprintf(stderr,
- " -h, --host=HOST Specify master host machine (apprentice only)"
- "\n");
- fprintf(stderr,
+ "Usage: risu [--master|--fulldump|--diffdump]\n"
+ " [--host <ip>] [--port <port>] <image file>\n"
+ "\n"
+ "Run through the pattern file verifying each instruction\n"
+ "between master and apprentice risu processes.\n"
+ "\n"
+ "Options:\n"
+ " --master Be the master (server)\n"
+ " --fulldump Dump each record\n"
+ " --diffdump Dump difference between each record\n"
+ " -t, --trace=FILE Record/playback " TRACE_TYPE " trace file\n"
+ " -h, --host=HOST Specify master host machine\n"
" -p, --port=PORT Specify the port to connect to/listen on "
"(default 9191)\n");
if (arch_extra_help) {
@@ -512,7 +590,9 @@ static struct option * setup_options(char **short_opts)
{
static struct option default_longopts[] = {
{"help", no_argument, 0, '?'},
- {"master", no_argument, &ismaster, 1},
+ {"master", no_argument, &operation, DO_MASTER},
+ {"fulldump", no_argument, &operation, DO_FULLDUMP},
+ {"diffdump", no_argument, &operation, DO_DIFFDUMP},
{"host", required_argument, 0, 'h'},
{"port", required_argument, 0, 'p'},
{"trace", required_argument, 0, 't'},
@@ -520,7 +600,7 @@ static struct option * setup_options(char **short_opts)
};
struct option *lopts = &default_longopts[0];
- *short_opts = "h:p:t:";
+ *short_opts = "d:h:p:t:";
if (arch_long_opts) {
const size_t osize = sizeof(struct option);
@@ -551,6 +631,7 @@ int main(int argc, char **argv)
char *trace_fn = NULL;
struct option *longopts;
char *shortopts;
+ bool ismaster;
longopts = setup_options(&shortopts);
@@ -586,6 +667,8 @@ int main(int argc, char **argv)
}
}
+ ismaster = operation == DO_MASTER;
+
if (trace) {
if (strcmp(trace_fn, "-") == 0) {
comm_fd = ismaster ? STDOUT_FILENO : STDIN_FILENO;
@@ -609,6 +692,10 @@ int main(int argc, char **argv)
}
}
+ if (operation == DO_FULLDUMP || operation == DO_DIFFDUMP) {
+ return dump_trace(operation == DO_FULLDUMP);
+ }
+
imgfile = argv[optind];
if (!imgfile) {
fprintf(stderr, "Error: must specify image file name\n\n");
--
2.20.1
next prev parent reply other threads:[~2020-05-22 2:41 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-22 2:34 [PATCH v3 00/25] risu cleanups and improvements Richard Henderson
2020-05-22 2:34 ` [PATCH v3 01/25] Use bool for tracing variables Richard Henderson
2020-05-22 2:34 ` [PATCH v3 02/25] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2020-05-22 2:34 ` [PATCH v3 03/25] Hoist trace file and socket opening Richard Henderson
2020-05-22 2:34 ` [PATCH v3 04/25] Adjust tracefile open for write Richard Henderson
2020-05-22 2:34 ` [PATCH v3 05/25] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2020-05-22 2:34 ` [PATCH v3 06/25] Make some risu.c symbols static Richard Henderson
2020-05-22 2:34 ` [PATCH v3 07/25] Add enum RisuOp Richard Henderson
2020-05-22 2:34 ` [PATCH v3 08/25] Add enum RisuResult Richard Henderson
2020-05-22 2:34 ` [PATCH v3 09/25] Unify i/o functions and use RisuResult Richard Henderson
2020-05-22 2:34 ` [PATCH v3 10/25] Pass non-OK result back through siglongjmp Richard Henderson
2020-05-22 2:34 ` [PATCH v3 11/25] Always write for --master Richard Henderson
2020-05-22 2:34 ` [PATCH v3 12/25] Simplify syncing with master Richard Henderson
2020-05-22 2:34 ` [PATCH v3 13/25] Split RES_MISMATCH for registers and memory Richard Henderson
2020-05-22 2:34 ` [PATCH v3 14/25] Merge reginfo.c into risu.c Richard Henderson
2020-06-23 8:33 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 15/25] Rearrange reginfo and memblock buffers Richard Henderson
2020-06-23 8:47 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 16/25] Split out recv_register_info Richard Henderson
2020-06-23 10:38 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 17/25] Add magic and size to the trace header Richard Henderson
2020-06-23 14:52 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 18/25] Compute reginfo_size based on the reginfo Richard Henderson
2020-06-23 14:54 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 19/25] aarch64: Reorg sve reginfo to save space Richard Henderson
2020-06-23 16:32 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 20/25] aarch64: Use arch_init to configure sve Richard Henderson
2020-06-23 16:54 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 21/25] ppc64: Use uint64_t to represent double Richard Henderson
2020-06-23 16:58 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 22/25] Standardize reginfo_dump_mismatch printing Richard Henderson
2020-06-23 17:03 ` Alex Bennée
2020-05-22 2:34 ` Richard Henderson [this message]
2020-05-22 2:34 ` [PATCH v3 24/25] Remove return value from reginfo_dump Richard Henderson
2020-06-23 17:38 ` Alex Bennée
2020-05-22 2:34 ` [PATCH v3 25/25] ppc64: Clean up reginfo handling Richard Henderson
2020-05-22 4:10 ` Richard Henderson
2020-06-23 17:45 ` Alex Bennée
2020-06-23 18:06 ` Richard Henderson
2020-06-22 19:17 ` [PATCH v3 00/25] risu cleanups and improvements Peter Maydell
2020-06-23 8:23 ` Alex Bennée
2020-06-23 9:00 ` Alex Bennée
2020-06-23 13:30 ` Alex Bennée
2020-06-23 20:26 ` Richard Henderson
2020-06-23 14:44 ` [PATCH] risu: don't do a full register compare for OP_SIGILL Alex Bennée
2020-06-23 15:23 ` Richard Henderson
2020-06-23 15:54 ` Peter Maydell
2020-06-23 16:17 ` Alex Bennée
2020-06-23 19:55 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200522023440.26261-24-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).