[PATCH v3 03/11] hw/sd/sdcard: Do not switch to ReceivingData if address is invalid

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

From: Philippe Mathieu-Daudé <f4bug@amsat.org>

Only move the state machine to ReceivingData if there is no
pending error.  This avoids later OOB access while processing
commands queued.

  "SD Specifications Part 1 Physical Layer Simplified Spec. v3.01"

  4.3.3 Data Read

  Read command is rejected if BLOCK_LEN_ERROR or ADDRESS_ERROR
  occurred and no data transfer is performed.

  4.3.4 Data Write

  Write command is rejected if BLOCK_LEN_ERROR or ADDRESS_ERROR
  occurred and no data transfer is performed.

Fixes: CVE-2020-13253
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Buglink: https://bugs.launchpad.net/qemu/+bug/1880822
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/sd/sd.c | 64 ++++++++++++++++++++++++++++++++----------------------
 1 file changed, 38 insertions(+), 26 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index f1b12b49db..90d5ff6209 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -1150,13 +1150,15 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
     case 17:	/* CMD17:  READ_SINGLE_BLOCK */
         switch (sd->state) {
         case sd_transfer_state:
-            sd->state = sd_sendingdata_state;
-            sd->data_start = addr;
-            sd->data_offset = 0;
 
             if (sd->data_start + sd->blk_len > sd->size) {
                 sd->card_status |= ADDRESS_ERROR;
+                return sd_r1;
             }
+
+            sd->state = sd_sendingdata_state;
+            sd->data_start = addr;
+            sd->data_offset = 0;
             return sd_r1;
 
         default:
@@ -1167,13 +1169,15 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
     case 18:	/* CMD18:  READ_MULTIPLE_BLOCK */
         switch (sd->state) {
         case sd_transfer_state:
-            sd->state = sd_sendingdata_state;
-            sd->data_start = addr;
-            sd->data_offset = 0;
 
             if (sd->data_start + sd->blk_len > sd->size) {
                 sd->card_status |= ADDRESS_ERROR;
+                return sd_r1;
             }
+
+            sd->state = sd_sendingdata_state;
+            sd->data_start = addr;
+            sd->data_offset = 0;
             return sd_r1;
 
         default:
@@ -1213,20 +1217,24 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
             /* Writing in SPI mode not implemented.  */
             if (sd->spi)
                 break;
+
+            if (sd->data_start + sd->blk_len > sd->size) {
+                sd->card_status |= ADDRESS_ERROR;
+                return sd_r1;
+            }
+            if (sd_wp_addr(sd, sd->data_start)) {
+                sd->card_status |= WP_VIOLATION;
+                return sd_r1;
+            }
+            if (sd->csd[14] & 0x30) {
+                sd->card_status |= WP_VIOLATION;
+                return sd_r1;
+            }
+
             sd->state = sd_receivingdata_state;
             sd->data_start = addr;
             sd->data_offset = 0;
             sd->blk_written = 0;
-
-            if (sd->data_start + sd->blk_len > sd->size) {
-                sd->card_status |= ADDRESS_ERROR;
-            }
-            if (sd_wp_addr(sd, sd->data_start)) {
-                sd->card_status |= WP_VIOLATION;
-            }
-            if (sd->csd[14] & 0x30) {
-                sd->card_status |= WP_VIOLATION;
-            }
             return sd_r1;
 
         default:
@@ -1240,20 +1248,24 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
             /* Writing in SPI mode not implemented.  */
             if (sd->spi)
                 break;
+
+            if (sd->data_start + sd->blk_len > sd->size) {
+                sd->card_status |= ADDRESS_ERROR;
+                return sd_r1;
+            }
+            if (sd_wp_addr(sd, sd->data_start)) {
+                sd->card_status |= WP_VIOLATION;
+                return sd_r1;
+            }
+            if (sd->csd[14] & 0x30) {
+                sd->card_status |= WP_VIOLATION;
+                return sd_r1;
+            }
+
             sd->state = sd_receivingdata_state;
             sd->data_start = addr;
             sd->data_offset = 0;
             sd->blk_written = 0;
-
-            if (sd->data_start + sd->blk_len > sd->size) {
-                sd->card_status |= ADDRESS_ERROR;
-            }
-            if (sd_wp_addr(sd, sd->data_start)) {
-                sd->card_status |= WP_VIOLATION;
-            }
-            if (sd->csd[14] & 0x30) {
-                sd->card_status |= WP_VIOLATION;
-            }
             return sd_r1;
 
         default:
-- 
2.21.3