From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Jason Wang" <jasowang@redhat.com>,
"Raphael Norwitz" <raphael.norwitz@nutanix.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [PULL v2 46/58] libvhost-user: advertise vring features
Date: Fri, 12 Jun 2020 10:52:44 -0400 [thread overview]
Message-ID: <20200612141917.9446-47-mst@redhat.com> (raw)
In-Reply-To: <20200612141917.9446-1-mst@redhat.com>
From: Stefan Hajnoczi <stefanha@redhat.com>
libvhost-user implements several vring features without advertising
them. There is no way for the vhost-user master to detect support for
these features.
Things more or less work today because QEMU assumes the vhost-user
backend always implements certain feature bits like
VIRTIO_RING_F_EVENT_IDX. This is not documented anywhere.
This patch explicitly advertises features implemented in libvhost-user
so that the vhost-user master does not need to make undocumented
assumptions.
Feature bits that libvhost-user now advertises can be removed from
vhost-user-blk.c. Devices should not be responsible for advertising
vring feature bits, that is libvhost-user's job.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200529161338.456017-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
contrib/libvhost-user/libvhost-user.c | 10 ++++++++++
contrib/vhost-user-blk/vhost-user-blk.c | 4 +---
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/contrib/libvhost-user/libvhost-user.c b/contrib/libvhost-user/libvhost-user.c
index b1e607298c..d315db1396 100644
--- a/contrib/libvhost-user/libvhost-user.c
+++ b/contrib/libvhost-user/libvhost-user.c
@@ -498,6 +498,16 @@ static bool
vu_get_features_exec(VuDev *dev, VhostUserMsg *vmsg)
{
vmsg->payload.u64 =
+ /*
+ * The following VIRTIO feature bits are supported by our virtqueue
+ * implementation:
+ */
+ 1ULL << VIRTIO_F_NOTIFY_ON_EMPTY |
+ 1ULL << VIRTIO_RING_F_INDIRECT_DESC |
+ 1ULL << VIRTIO_RING_F_EVENT_IDX |
+ 1ULL << VIRTIO_F_VERSION_1 |
+
+ /* vhost-user feature bits */
1ULL << VHOST_F_LOG_ALL |
1ULL << VHOST_USER_F_PROTOCOL_FEATURES;
diff --git a/contrib/vhost-user-blk/vhost-user-blk.c b/contrib/vhost-user-blk/vhost-user-blk.c
index 6fd91c7e99..25eccd02b5 100644
--- a/contrib/vhost-user-blk/vhost-user-blk.c
+++ b/contrib/vhost-user-blk/vhost-user-blk.c
@@ -382,9 +382,7 @@ vub_get_features(VuDev *dev)
1ull << VIRTIO_BLK_F_DISCARD |
1ull << VIRTIO_BLK_F_WRITE_ZEROES |
#endif
- 1ull << VIRTIO_BLK_F_CONFIG_WCE |
- 1ull << VIRTIO_F_VERSION_1 |
- 1ull << VHOST_USER_F_PROTOCOL_FEATURES;
+ 1ull << VIRTIO_BLK_F_CONFIG_WCE;
if (vdev_blk->enable_ro) {
features |= 1ull << VIRTIO_BLK_F_RO;
--
MST
next prev parent reply other threads:[~2020-06-12 15:12 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-12 14:51 [PULL v2 00/58] virtio,acpi,pci: features, fixes, cleanups, tests Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 01/58] msix: allow qword MSI-X table accesses Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 02/58] diffs-allowed: add the SRAT AML to diffs-allowed Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 03/58] hw/acpi/nvdimm: add a helper to augment SRAT generation Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 04/58] tests/acpi: update expected SRAT files Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 05/58] qtest: allow DSDT acpi table changes Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 06/58] acpi: move aml builder code for rtc device Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 07/58] acpi: rtc: use a single crs range Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 08/58] acpi: serial: don't use _STA method Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 09/58] acpi: move aml builder code for serial device Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 10/58] acpi: parallel: don't use _STA method Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 11/58] acpi: move aml builder code for parallel device Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 12/58] tests/acpi: update DSDT expected files Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 13/58] acpi: tpm: Do not build TCPA table for TPM 2 Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 14/58] acpi: Convert build_tpm2() to build_append* API Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 15/58] acpi: Move build_tpm2() in the generic part Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 16/58] arm/acpi: TPM2 ACPI table support Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 17/58] test/tpm-emu: include sockets and channel headers in tpm-emu header Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 18/58] tests/acpi: Add void tables for Q35/TPM-TIS bios-tables-test Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 19/58] tests: tpm-emu: Remove assert on TPM2_ST_NO_SESSIONS Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 20/58] bios-tables-test: Add Q35/TPM-TIS test Michael S. Tsirkin
2020-06-15 10:02 ` Philippe Mathieu-Daudé
2020-06-15 10:22 ` Thomas Huth
2020-06-15 12:35 ` Auger Eric
2020-06-15 12:58 ` Thomas Huth
2020-06-12 14:51 ` [PULL v2 21/58] bios-tables-test: Generate reference tables for Q35/TPM-TIS Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 22/58] virtio-balloon: fix free page hinting without an iothread Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 23/58] virtio-balloon: fix free page hinting check on unrealize Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 24/58] virtio-balloon: unref the iothread when unrealizing Michael S. Tsirkin
2020-06-12 14:51 ` [PULL v2 25/58] virtio-balloon: Implement support for page poison reporting feature Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 26/58] virtio-balloon: Provide an interface for free page reporting Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 27/58] MAINTAINERS: Fix the classification of bios-tables-test-allowed-diff.h Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 28/58] hw/pci/pcie: Move hot plug capability check to pre_plug callback Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 29/58] pci: assert configuration access is within bounds Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 30/58] hw/pci-host/prep: Correct RAVEN bus bridge memory region size Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 31/58] hw/pci/pci_bridge: Correct pci_bridge_io " Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 32/58] hw/pci/pci_bridge: Use the IEC binary prefix definitions Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 33/58] hw/pci-host: " Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 34/58] char-socket: return -1 in case of disconnect during tcp_chr_write Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 35/58] vhost-user-blk: delay vhost_user_blk_disconnect Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 36/58] Add helper to populate vhost-user message regions Michael S. Tsirkin
2020-06-19 12:59 ` Peter Maydell
2020-06-12 14:52 ` [PULL v2 37/58] Add vhost-user helper to get MemoryRegion data Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 38/58] Add VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 39/58] Transmit vhost-user memory regions individually Michael S. Tsirkin
2020-06-19 13:02 ` Peter Maydell
2020-06-22 18:51 ` Raphael Norwitz
2020-06-12 14:52 ` [PULL v2 40/58] Lift max memory slots limit imposed by vhost-user Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 41/58] Refactor out libvhost-user fault generation logic Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 42/58] Support ram slot configuration in libvhost-user Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 43/58] Support adding individual regions " Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 44/58] Support individual region unmap " Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 45/58] Lift max ram slots limit " Michael S. Tsirkin
2020-06-12 14:52 ` Michael S. Tsirkin [this message]
2020-06-12 14:52 ` [PULL v2 47/58] hw/pci: Fix crash when running QEMU with "-nic model=rocker" Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 48/58] vhost-vsock: add vhost-vsock-common abstraction Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 49/58] virtio: add vhost-user-vsock base device Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 50/58] virtio: add vhost-user-vsock-pci device Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 51/58] acpi: make build_madt() more generic Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 52/58] acpi: create acpi-common.c and move madt code Michael S. Tsirkin
2020-06-12 14:52 ` [PULL v2 53/58] acpi: madt: skip pci override on pci-less systems Michael S. Tsirkin
2020-06-12 14:53 ` [PULL v2 54/58] acpi: fadt: add hw-reduced sleep register support Michael S. Tsirkin
2020-06-12 14:53 ` [PULL v2 55/58] acpi: ged: rename event memory region Michael S. Tsirkin
2020-06-12 14:53 ` [PULL v2 56/58] Fix parameter type in vhost migration log path Michael S. Tsirkin
2020-06-12 14:53 ` [PULL v2 57/58] pci: Display PCI IRQ pin in "info pci" Michael S. Tsirkin
2020-06-12 14:53 ` [PULL v2 58/58] virtio-pci: fix queue_enable write Michael S. Tsirkin
2020-06-12 15:51 ` [PULL v2 00/58] virtio, acpi, pci: features, fixes, cleanups, tests no-reply
2020-06-12 16:11 ` Michael S. Tsirkin
2020-06-12 22:01 ` Peter Maydell
2020-06-16 7:26 ` Auger Eric
2020-06-16 7:43 ` Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200612141917.9446-47-mst@redhat.com \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=raphael.norwitz@nutanix.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).