qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 33/43] qdev-properties: add size32 property type
Date: Wed, 17 Jun 2020 16:48:59 +0200	[thread overview]
Message-ID: <20200617144909.192176-34-kwolf@redhat.com> (raw)
In-Reply-To: <20200617144909.192176-1-kwolf@redhat.com>

From: Roman Kagan <rvkagan@yandex-team.ru>

Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t.  It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).

The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.

Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 include/hw/qdev-properties.h |  3 +++
 hw/core/qdev-properties.c    | 40 ++++++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index f161604fb6..c03eadfad6 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -29,6 +29,7 @@ extern const PropertyInfo qdev_prop_drive;
 extern const PropertyInfo qdev_prop_drive_iothread;
 extern const PropertyInfo qdev_prop_netdev;
 extern const PropertyInfo qdev_prop_pci_devfn;
+extern const PropertyInfo qdev_prop_size32;
 extern const PropertyInfo qdev_prop_blocksize;
 extern const PropertyInfo qdev_prop_pci_host_devaddr;
 extern const PropertyInfo qdev_prop_uuid;
@@ -196,6 +197,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
                         BlockdevOnError)
 #define DEFINE_PROP_BIOS_CHS_TRANS(_n, _s, _f, _d) \
     DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_bios_chs_trans, int)
+#define DEFINE_PROP_SIZE32(_n, _s, _f, _d)                       \
+    DEFINE_PROP_UNSIGNED(_n, _s, _f, _d, qdev_prop_size32, uint32_t)
 #define DEFINE_PROP_BLOCKSIZE(_n, _s, _f) \
     DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint16_t)
 #define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 249dc69bd8..40c13f6ebe 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -727,6 +727,46 @@ const PropertyInfo qdev_prop_pci_devfn = {
     .set_default_value = set_default_value_int,
 };
 
+/* --- 32bit unsigned int 'size' type --- */
+
+static void set_size32(Object *obj, Visitor *v, const char *name, void *opaque,
+                       Error **errp)
+{
+    DeviceState *dev = DEVICE(obj);
+    Property *prop = opaque;
+    uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
+    uint64_t value;
+    Error *local_err = NULL;
+
+    if (dev->realized) {
+        qdev_prop_set_after_realize(dev, name, errp);
+        return;
+    }
+
+    visit_type_size(v, name, &value, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    if (value > UINT32_MAX) {
+        error_setg(errp,
+                   "Property %s.%s doesn't take value %" PRIu64
+                   " (maximum: %u)",
+                   dev->id ? : "", name, value, UINT32_MAX);
+        return;
+    }
+
+    *ptr = value;
+}
+
+const PropertyInfo qdev_prop_size32 = {
+    .name  = "size",
+    .get = get_uint32,
+    .set = set_size32,
+    .set_default_value = set_default_value_uint,
+};
+
 /* --- blocksize --- */
 
 /* lower limit is sector size */
-- 
2.25.4



  parent reply	other threads:[~2020-06-17 15:19 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
2020-06-17 14:48 ` [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer Kevin Wolf
2020-06-17 14:48 ` [PULL 02/43] icount: make dma reads deterministic Kevin Wolf
2020-06-17 14:48 ` [PULL 03/43] virtio-blk: Refactor the code that processes queued requests Kevin Wolf
2020-06-17 14:48 ` [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context Kevin Wolf
2020-06-17 14:48 ` [PULL 05/43] block: Refactor subdirectory recursion during make Kevin Wolf
2020-06-17 14:48 ` [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size Kevin Wolf
2020-06-17 14:48 ` [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation Kevin Wolf
2020-06-17 14:48 ` [PULL 08/43] hw/block/nvme: rename trace events to pci_nvme Kevin Wolf
2020-06-17 14:48 ` [PULL 09/43] hw/block/nvme: remove superfluous breaks Kevin Wolf
2020-06-17 14:48 ` [PULL 10/43] hw/block/nvme: move device parameters to separate struct Kevin Wolf
2020-06-17 14:48 ` [PULL 11/43] hw/block/nvme: use constants in identify Kevin Wolf
2020-06-17 14:48 ` [PULL 12/43] hw/block/nvme: refactor nvme_addr_read Kevin Wolf
2020-06-17 14:48 ` [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior Kevin Wolf
2020-06-17 14:48 ` [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter Kevin Wolf
2020-06-17 14:48 ` [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members Kevin Wolf
2020-06-17 14:48 ` [PULL 16/43] hw/block/nvme: factor out property/constraint checks Kevin Wolf
2020-06-17 14:48 ` [PULL 17/43] hw/block/nvme: factor out device state setup Kevin Wolf
2020-06-17 14:48 ` [PULL 18/43] hw/block/nvme: factor out block backend setup Kevin Wolf
2020-06-17 14:48 ` [PULL 19/43] hw/block/nvme: add namespace helpers Kevin Wolf
2020-06-17 14:48 ` [PULL 20/43] hw/block/nvme: factor out namespace setup Kevin Wolf
2020-06-17 14:48 ` [PULL 21/43] hw/block/nvme: factor out pci setup Kevin Wolf
2020-06-17 14:48 ` [PULL 22/43] hw/block/nvme: factor out cmb setup Kevin Wolf
2020-06-17 14:48 ` [PULL 23/43] hw/block/nvme: factor out pmr setup Kevin Wolf
2020-06-17 14:48 ` [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init Kevin Wolf
2020-06-17 14:48 ` [PULL 25/43] hw/block/nvme: factor out controller identify setup Kevin Wolf
2020-06-17 14:48 ` [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value Kevin Wolf
2020-06-17 14:48 ` [PULL 27/43] hw/block/nvme: add msix_qsize parameter Kevin Wolf
2020-06-17 14:48 ` [PULL 28/43] hw/block/nvme: verify msix_init_exclusive_bar() return value Kevin Wolf
2020-06-17 14:48 ` [PULL 29/43] .gitignore: Ignore storage-daemon files Kevin Wolf
2020-06-17 14:48 ` [PULL 30/43] virtio-blk: store opt_io_size with correct size Kevin Wolf
2020-06-17 14:48 ` [PULL 31/43] block: consolidate blocksize properties consistency checks Kevin Wolf
2020-06-17 14:48 ` [PULL 32/43] qdev-properties: blocksize: use same limits in code and description Kevin Wolf
2020-06-17 14:48 ` Kevin Wolf [this message]
2020-06-17 14:49 ` [PULL 34/43] qdev-properties: make blocksize accept size suffixes Kevin Wolf
2020-06-17 14:49 ` [PULL 35/43] block: make BlockConf size props 32bit and " Kevin Wolf
2020-06-17 14:49 ` [PULL 36/43] qdev-properties: add getter for size32 and blocksize Kevin Wolf
2020-06-17 14:49 ` [PULL 37/43] block: lift blocksize property limit to 2 MiB Kevin Wolf
2020-06-17 14:49 ` [PULL 38/43] iotests.py: Add skip_for_formats() decorator Kevin Wolf
2020-06-17 14:49 ` [PULL 39/43] iotests/041: Skip test_small_target for qed Kevin Wolf
2020-06-17 14:49 ` [PULL 40/43] iotests/292: data_file is unsupported Kevin Wolf
2020-06-17 14:49 ` [PULL 41/43] iotests/229: " Kevin Wolf
2020-06-17 14:49 ` [PULL 42/43] iotests/{190,291}: compat=0.10 " Kevin Wolf
2020-06-17 14:49 ` [PULL 43/43] iotests: Add copyright line in qcow2.py Kevin Wolf
2020-06-17 15:48 ` [PULL 00/43] Block layer patches no-reply
2020-06-18 14:30 ` Peter Maydell
2020-06-25  8:39   ` Klaus Jensen
2020-06-25 10:39     ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200617144909.192176-34-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).