[PULL 03/19] acpi: move aml builder code for floppy device

["Michael S. Tsirkin" <mst@redhat.com>]

From: Gerd Hoffmann <kraxel@redhat.com>

DSDT change: isa device order changes in case MI1 (ipmi) is present.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/block/fdc.c       | 83 ++++++++++++++++++++++++++++++++++++++++++++
 hw/i386/acpi-build.c | 83 --------------------------------------------
 stubs/cmos.c         |  7 ++++
 stubs/Makefile.objs  |  1 +
 4 files changed, 91 insertions(+), 83 deletions(-)
 create mode 100644 stubs/cmos.c

diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index be0674e4aa..5244df6f91 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -32,6 +32,8 @@
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 #include "qemu/timer.h"
+#include "hw/i386/pc.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/irq.h"
 #include "hw/isa/isa.h"
 #include "hw/qdev-properties.h"
@@ -2768,6 +2770,85 @@ void isa_fdc_get_drive_max_chs(FloppyDriveType type,
     (*maxc)--;
 }
 
+static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
+{
+    Aml *dev, *fdi;
+    uint8_t maxc, maxh, maxs;
+
+    isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
+
+    dev = aml_device("FLP%c", 'A' + idx);
+
+    aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
+
+    fdi = aml_package(16);
+    aml_append(fdi, aml_int(idx));  /* Drive Number */
+    aml_append(fdi,
+        aml_int(cmos_get_fd_drive_type(type)));  /* Device Type */
+    /*
+     * the values below are the limits of the drive, and are thus independent
+     * of the inserted media
+     */
+    aml_append(fdi, aml_int(maxc));  /* Maximum Cylinder Number */
+    aml_append(fdi, aml_int(maxs));  /* Maximum Sector Number */
+    aml_append(fdi, aml_int(maxh));  /* Maximum Head Number */
+    /*
+     * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
+     * the drive type, so shall we
+     */
+    aml_append(fdi, aml_int(0xAF));  /* disk_specify_1 */
+    aml_append(fdi, aml_int(0x02));  /* disk_specify_2 */
+    aml_append(fdi, aml_int(0x25));  /* disk_motor_wait */
+    aml_append(fdi, aml_int(0x02));  /* disk_sector_siz */
+    aml_append(fdi, aml_int(0x12));  /* disk_eot */
+    aml_append(fdi, aml_int(0x1B));  /* disk_rw_gap */
+    aml_append(fdi, aml_int(0xFF));  /* disk_dtl */
+    aml_append(fdi, aml_int(0x6C));  /* disk_formt_gap */
+    aml_append(fdi, aml_int(0xF6));  /* disk_fill */
+    aml_append(fdi, aml_int(0x0F));  /* disk_head_sttl */
+    aml_append(fdi, aml_int(0x08));  /* disk_motor_strt */
+
+    aml_append(dev, aml_name_decl("_FDI", fdi));
+    return dev;
+}
+
+static void fdc_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *dev;
+    Aml *crs;
+    int i;
+
+#define ACPI_FDE_MAX_FD 4
+    uint32_t fde_buf[5] = {
+        0, 0, 0, 0,     /* presence of floppy drives #0 - #3 */
+        cpu_to_le32(2)  /* tape presence (2 == never present) */
+    };
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
+    aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
+    aml_append(crs, aml_irq_no_flags(6));
+    aml_append(crs,
+        aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
+
+    dev = aml_device("FDC0");
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
+        FloppyDriveType type = isa_fdc_get_drive_type(isadev, i);
+
+        if (type < FLOPPY_DRIVE_TYPE_NONE) {
+            fde_buf[i] = cpu_to_le32(1);  /* drive present */
+            aml_append(dev, build_fdinfo_aml(i, type));
+        }
+    }
+    aml_append(dev, aml_name_decl("_FDE",
+               aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
+
+    aml_append(scope, dev);
+}
+
 static const VMStateDescription vmstate_isa_fdc ={
     .name = "fdc",
     .version_id = 2,
@@ -2801,11 +2882,13 @@ static Property isa_fdc_properties[] = {
 static void isabus_fdc_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = isabus_fdc_realize;
     dc->fw_name = "fdc";
     dc->reset = fdctrl_external_reset_isa;
     dc->vmsd = &vmstate_isa_fdc;
+    isa->build_aml = fdc_isa_build_aml;
     device_class_set_props(dc, isa_fdc_properties);
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 }
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 900f786d08..45297d9a90 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -938,85 +938,6 @@ static void build_hpet_aml(Aml *table)
     aml_append(table, scope);
 }
 
-static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
-{
-    Aml *dev, *fdi;
-    uint8_t maxc, maxh, maxs;
-
-    isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
-
-    dev = aml_device("FLP%c", 'A' + idx);
-
-    aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
-
-    fdi = aml_package(16);
-    aml_append(fdi, aml_int(idx));  /* Drive Number */
-    aml_append(fdi,
-        aml_int(cmos_get_fd_drive_type(type)));  /* Device Type */
-    /*
-     * the values below are the limits of the drive, and are thus independent
-     * of the inserted media
-     */
-    aml_append(fdi, aml_int(maxc));  /* Maximum Cylinder Number */
-    aml_append(fdi, aml_int(maxs));  /* Maximum Sector Number */
-    aml_append(fdi, aml_int(maxh));  /* Maximum Head Number */
-    /*
-     * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
-     * the drive type, so shall we
-     */
-    aml_append(fdi, aml_int(0xAF));  /* disk_specify_1 */
-    aml_append(fdi, aml_int(0x02));  /* disk_specify_2 */
-    aml_append(fdi, aml_int(0x25));  /* disk_motor_wait */
-    aml_append(fdi, aml_int(0x02));  /* disk_sector_siz */
-    aml_append(fdi, aml_int(0x12));  /* disk_eot */
-    aml_append(fdi, aml_int(0x1B));  /* disk_rw_gap */
-    aml_append(fdi, aml_int(0xFF));  /* disk_dtl */
-    aml_append(fdi, aml_int(0x6C));  /* disk_formt_gap */
-    aml_append(fdi, aml_int(0xF6));  /* disk_fill */
-    aml_append(fdi, aml_int(0x0F));  /* disk_head_sttl */
-    aml_append(fdi, aml_int(0x08));  /* disk_motor_strt */
-
-    aml_append(dev, aml_name_decl("_FDI", fdi));
-    return dev;
-}
-
-static Aml *build_fdc_device_aml(ISADevice *fdc)
-{
-    int i;
-    Aml *dev;
-    Aml *crs;
-
-#define ACPI_FDE_MAX_FD 4
-    uint32_t fde_buf[5] = {
-        0, 0, 0, 0,     /* presence of floppy drives #0 - #3 */
-        cpu_to_le32(2)  /* tape presence (2 == never present) */
-    };
-
-    dev = aml_device("FDC0");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
-    aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
-    aml_append(crs, aml_irq_no_flags(6));
-    aml_append(crs,
-        aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
-        FloppyDriveType type = isa_fdc_get_drive_type(fdc, i);
-
-        if (type < FLOPPY_DRIVE_TYPE_NONE) {
-            fde_buf[i] = cpu_to_le32(1);  /* drive present */
-            aml_append(dev, build_fdinfo_aml(i, type));
-        }
-    }
-    aml_append(dev, aml_name_decl("_FDE",
-               aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
-
-    return dev;
-}
-
 static Aml *build_kbd_device_aml(void)
 {
     Aml *dev;
@@ -1092,7 +1013,6 @@ static Aml *build_vmbus_device_aml(VMBusBridge *vmbus_bridge)
 
 static void build_isa_devices_aml(Aml *table)
 {
-    ISADevice *fdc = pc_find_fdc0();
     VMBusBridge *vmbus_bridge = vmbus_bridge_find();
     bool ambiguous;
 
@@ -1101,9 +1021,6 @@ static void build_isa_devices_aml(Aml *table)
 
     aml_append(scope, build_kbd_device_aml());
     aml_append(scope, build_mouse_device_aml());
-    if (fdc) {
-        aml_append(scope, build_fdc_device_aml(fdc));
-    }
 
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
diff --git a/stubs/cmos.c b/stubs/cmos.c
new file mode 100644
index 0000000000..416cbe4055
--- /dev/null
+++ b/stubs/cmos.c
@@ -0,0 +1,7 @@
+#include "qemu/osdep.h"
+#include "hw/i386/pc.h"
+
+int cmos_get_fd_drive_type(FloppyDriveType fd0)
+{
+    return 0;
+}
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index 28e48171d1..f32b9e47a3 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -1,4 +1,5 @@
 stub-obj-y += blk-commit-all.o
+stub-obj-y += cmos.o
 stub-obj-y += cpu-get-clock.o
 stub-obj-y += cpu-get-icount.o
 stub-obj-y += dump.o
-- 
MST