From: Stefan Berger <stefanb@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, Stefan Berger <stefanb@linux.ibm.com>,
Eric Auger <eric.auger@redhat.com>,
Stefan Berger <stefanb@linux.vnet.ibm.com>
Subject: [PULL v1 7/8] tpm: Guard irq related ops in case interrupts are disabled
Date: Thu, 25 Jun 2020 09:23:24 -0400 [thread overview]
Message-ID: <20200625132325.2025245-8-stefanb@linux.vnet.ibm.com> (raw)
In-Reply-To: <20200625132325.2025245-1-stefanb@linux.vnet.ibm.com>
Check for irq_num having the value of TPM_IRQ_DISABLED before calling any
IRQ related functions or allowing the user to try to enable interrupts.
Explicitly allow the value of TPM_IRQ_DISABLED in irq_num.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200617142305.1198672-8-stefanb@linux.vnet.ibm.com
---
hw/tpm/tpm_tis_common.c | 12 +++++++++++-
hw/tpm/tpm_tis_isa.c | 6 ++++--
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/hw/tpm/tpm_tis_common.c b/hw/tpm/tpm_tis_common.c
index 93667e7788..8ecd11a38c 100644
--- a/hw/tpm/tpm_tis_common.c
+++ b/hw/tpm/tpm_tis_common.c
@@ -354,7 +354,11 @@ static uint64_t tpm_tis_mmio_read(void *opaque, hwaddr addr,
val = s->loc[locty].inte;
break;
case TPM_TIS_REG_INT_VECTOR:
- val = s->irq_num;
+ if (s->irq_num != TPM_IRQ_DISABLED) {
+ val = s->irq_num;
+ } else {
+ val = 0;
+ }
break;
case TPM_TIS_REG_INT_STATUS:
val = s->loc[locty].ints;
@@ -586,6 +590,9 @@ static void tpm_tis_mmio_write(void *opaque, hwaddr addr,
if (s->active_locty != locty) {
break;
}
+ if (s->irq_num == TPM_IRQ_DISABLED) {
+ val &= ~TPM_TIS_INT_ENABLED;
+ }
s->loc[locty].inte &= mask;
s->loc[locty].inte |= (val & (TPM_TIS_INT_ENABLED |
@@ -596,6 +603,9 @@ static void tpm_tis_mmio_write(void *opaque, hwaddr addr,
/* hard wired -- ignore */
break;
case TPM_TIS_REG_INT_STATUS:
+ if (s->irq_num == TPM_IRQ_DISABLED) {
+ break;
+ }
/* clearing of interrupt flags */
if (((val & TPM_TIS_INTERRUPTS_SUPPORTED)) &&
(s->loc[locty].ints & TPM_TIS_INTERRUPTS_SUPPORTED)) {
diff --git a/hw/tpm/tpm_tis_isa.c b/hw/tpm/tpm_tis_isa.c
index d00d49994d..11fec805d0 100644
--- a/hw/tpm/tpm_tis_isa.c
+++ b/hw/tpm/tpm_tis_isa.c
@@ -128,13 +128,15 @@ static void tpm_tis_isa_realizefn(DeviceState *dev, Error **errp)
error_setg(errp, "'tpmdev' property is required");
return;
}
- if (s->irq_num > 15) {
+ if (s->irq_num > 15 && s->irq_num != TPM_IRQ_DISABLED) {
error_setg(errp, "IRQ %d is outside valid range of 0 to 15",
s->irq_num);
return;
}
- isa_init_irq(ISA_DEVICE(dev), &s->irq, s->irq_num);
+ if (s->irq_num != TPM_IRQ_DISABLED) {
+ isa_init_irq(ISA_DEVICE(dev), &s->irq, s->irq_num);
+ }
memory_region_add_subregion(isa_address_space(ISA_DEVICE(dev)),
TPM_TIS_ADDR_BASE, &s->mmio);
--
2.24.1
next prev parent reply other threads:[~2020-06-25 13:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-25 13:23 [PULL v1 0/8] Merge tpm 2020/06/25 v1 Stefan Berger
2020-06-25 13:23 ` [PULL v1 1/8] tpm_tis: Allow lowering of IRQ also when locality is not active Stefan Berger
2020-06-25 13:23 ` [PULL v1 2/8] tpm: Extend TPMIfClass with get_irqnum() function Stefan Berger
2020-06-25 13:23 ` [PULL v1 3/8] tests: Temporarily ignore DSDT table differences Stefan Berger
2020-06-25 13:23 ` [PULL v1 4/8] tpm: Split TPM_TIS_IRQ into TPM_TIS_ISA_IRQ and TPM_TIS_SYSBUS_IRQ Stefan Berger
2020-06-25 13:23 ` [PULL v1 5/8] acpi: Enable TPM IRQ Stefan Berger
2020-06-25 13:23 ` [PULL v1 6/8] tests: Add updated DSDT Stefan Berger
2020-06-25 13:23 ` Stefan Berger [this message]
2020-06-25 13:23 ` [PULL v1 8/8] tpm: Disable interrupt support for TIS on sysbus Stefan Berger
2020-06-25 13:56 ` [PULL v1 0/8] Merge tpm 2020/06/25 v1 Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200625132325.2025245-8-stefanb@linux.vnet.ibm.com \
--to=stefanb@linux.vnet.ibm.com \
--cc=eric.auger@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanb@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).