From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
qemu-devel@nongnu.org, qemu-arm@nongnu.org,
peter.maydell@linaro.org, mst@redhat.com, armbru@redhat.com,
pbonzini@redhat.com, jean-philippe@linaro.org,
bbhushan2@marvell.com, peterx@redhat.com
Subject: [PATCH v6 1/5] qdev: Introduce DEFINE_PROP_RESERVED_REGION
Date: Fri, 26 Jun 2020 12:30:53 +0200 [thread overview]
Message-ID: <20200626103057.11263-2-eric.auger@redhat.com> (raw)
In-Reply-To: <20200626103057.11263-1-eric.auger@redhat.com>
Introduce a new property defining a reserved region:
<low address>:<high address>:<type>.
This will be used to encode reserved IOVA regions.
For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000:0xfeefffff:1.
On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
---
v4 -> v5:
- type becomes an unsigned + comment/error rewording
v3 -> v4:
- use ':' instead of commas as separators.
- rearrange error messages
- check snprintf returned value
- dared to keep Markus' R-b despite those changes
---
include/exec/memory.h | 6 +++
include/hw/qdev-properties.h | 3 ++
include/qemu/typedefs.h | 1 +
hw/core/qdev-properties.c | 89 ++++++++++++++++++++++++++++++++++++
4 files changed, 99 insertions(+)
diff --git a/include/exec/memory.h b/include/exec/memory.h
index 7207025bd4..84ee5b7a01 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -51,6 +51,12 @@ extern bool global_dirty_log;
typedef struct MemoryRegionOps MemoryRegionOps;
+struct ReservedRegion {
+ hwaddr low;
+ hwaddr high;
+ unsigned type;
+};
+
typedef struct IOMMUTLBEntry IOMMUTLBEntry;
/* See address_space_translate: bit 0 is read, bit 1 is write. */
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index 49c6cd2460..944e3f2e0c 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -19,6 +19,7 @@ extern const PropertyInfo qdev_prop_string;
extern const PropertyInfo qdev_prop_chr;
extern const PropertyInfo qdev_prop_tpm;
extern const PropertyInfo qdev_prop_macaddr;
+extern const PropertyInfo qdev_prop_reserved_region;
extern const PropertyInfo qdev_prop_on_off_auto;
extern const PropertyInfo qdev_prop_multifd_compression;
extern const PropertyInfo qdev_prop_losttickpolicy;
@@ -184,6 +185,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *)
#define DEFINE_PROP_MACADDR(_n, _s, _f) \
DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr)
+#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f) \
+ DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion)
#define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \
DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto)
#define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index ce4a78b687..15f5047bf1 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -58,6 +58,7 @@ typedef struct ISABus ISABus;
typedef struct ISADevice ISADevice;
typedef struct IsaDma IsaDma;
typedef struct MACAddr MACAddr;
+typedef struct ReservedRegion ReservedRegion;
typedef struct MachineClass MachineClass;
typedef struct MachineState MachineState;
typedef struct MemoryListener MemoryListener;
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 71f8aca7c6..ca7771f307 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -15,6 +15,7 @@
#include "chardev/char.h"
#include "qemu/uuid.h"
#include "qemu/units.h"
+#include "qemu/cutils.h"
void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
Error **errp)
@@ -578,6 +579,94 @@ const PropertyInfo qdev_prop_macaddr = {
.set = set_mac,
};
+/* --- Reserved Region --- */
+
+/*
+ * Accepted syntax:
+ * <low address>:<high address>:<type>
+ * where low/high addresses are uint64_t in hexadecimal
+ * and type is a non-negative decimal integer
+ */
+static void get_reserved_region(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ DeviceState *dev = DEVICE(obj);
+ Property *prop = opaque;
+ ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
+ char buffer[64];
+ char *p = buffer;
+ int rc;
+
+ rc = snprintf(buffer, sizeof(buffer), "0x%"PRIx64":0x%"PRIx64":%u",
+ rr->low, rr->high, rr->type);
+ assert(rc < sizeof(buffer));
+
+ visit_type_str(v, name, &p, errp);
+}
+
+static void set_reserved_region(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ DeviceState *dev = DEVICE(obj);
+ Property *prop = opaque;
+ ReservedRegion *rr = qdev_get_prop_ptr(dev, prop);
+ Error *local_err = NULL;
+ const char *endptr;
+ char *str;
+ int ret;
+
+ if (dev->realized) {
+ qdev_prop_set_after_realize(dev, name, errp);
+ return;
+ }
+
+ visit_type_str(v, name, &str, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ ret = qemu_strtou64(str, &endptr, 16, &rr->low);
+ if (ret) {
+ error_setg(errp, "start address of '%s'"
+ " must be a hexadecimal integer", name);
+ goto out;
+ }
+ if (*endptr != ':') {
+ goto separator_error;
+ }
+
+ ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high);
+ if (ret) {
+ error_setg(errp, "end address of '%s'"
+ " must be a hexadecimal integer", name);
+ goto out;
+ }
+ if (*endptr != ':') {
+ goto separator_error;
+ }
+
+ ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type);
+ if (ret) {
+ error_setg(errp, "type of '%s'"
+ " must be a non-negative decimal integer", name);
+ }
+ goto out;
+
+separator_error:
+ error_setg(errp, "reserved region fields must be separated with ':'");
+out:
+ g_free(str);
+ return;
+}
+
+const PropertyInfo qdev_prop_reserved_region = {
+ .name = "reserved_region",
+ .description = "Reserved Region, example: 0xFEE00000:0xFEEFFFFF:0",
+ .get = get_reserved_region,
+ .set = set_reserved_region,
+};
+
/* --- on/off/auto --- */
const PropertyInfo qdev_prop_on_off_auto = {
--
2.20.1
next prev parent reply other threads:[~2020-06-26 10:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-26 10:30 [PATCH v6 0/5] VIRTIO-IOMMU probe request support and MSI bypass on ARM Eric Auger
2020-06-26 10:30 ` Eric Auger [this message]
2020-06-26 10:30 ` [PATCH v6 2/5] virtio-iommu: Implement RESV_MEM probe request Eric Auger
2020-06-27 7:08 ` Markus Armbruster
2020-06-27 7:10 ` Auger Eric
2020-06-26 10:30 ` [PATCH v6 3/5] virtio-iommu: Handle reserved regions in the translation process Eric Auger
2020-06-26 10:30 ` [PATCH v6 4/5] virtio-iommu-pci: Add array of Interval properties Eric Auger
2020-06-27 7:03 ` Markus Armbruster
2020-06-27 7:08 ` Auger Eric
2020-06-26 10:30 ` [PATCH v6 5/5] hw/arm/virt: Let the virtio-iommu bypass MSIs Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200626103057.11263-2-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=armbru@redhat.com \
--cc=bbhushan2@marvell.com \
--cc=eric.auger.pro@gmail.com \
--cc=jean-philippe@linaro.org \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).