From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 1/2] hw/arm/palm.c: Detabify
Date: Sun, 28 Jun 2020 22:42:29 +0100 [thread overview]
Message-ID: <20200628214230.2592-2-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200628214230.2592-1-peter.maydell@linaro.org>
Remove hard-tabs from palm.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/palm.c | 64 +++++++++++++++++++++++++--------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/hw/arm/palm.c b/hw/arm/palm.c
index 97ca105d297..569836178f6 100644
--- a/hw/arm/palm.c
+++ b/hw/arm/palm.c
@@ -61,21 +61,21 @@ static const MemoryRegionOps static_ops = {
/* Palm Tunsgten|E support */
/* Shared GPIOs */
-#define PALMTE_USBDETECT_GPIO 0
-#define PALMTE_USB_OR_DC_GPIO 1
-#define PALMTE_TSC_GPIO 4
-#define PALMTE_PINTDAV_GPIO 6
-#define PALMTE_MMC_WP_GPIO 8
-#define PALMTE_MMC_POWER_GPIO 9
-#define PALMTE_HDQ_GPIO 11
-#define PALMTE_HEADPHONES_GPIO 14
-#define PALMTE_SPEAKER_GPIO 15
+#define PALMTE_USBDETECT_GPIO 0
+#define PALMTE_USB_OR_DC_GPIO 1
+#define PALMTE_TSC_GPIO 4
+#define PALMTE_PINTDAV_GPIO 6
+#define PALMTE_MMC_WP_GPIO 8
+#define PALMTE_MMC_POWER_GPIO 9
+#define PALMTE_HDQ_GPIO 11
+#define PALMTE_HEADPHONES_GPIO 14
+#define PALMTE_SPEAKER_GPIO 15
/* MPU private GPIOs */
-#define PALMTE_DC_GPIO 2
-#define PALMTE_MMC_SWITCH_GPIO 4
-#define PALMTE_MMC1_GPIO 6
-#define PALMTE_MMC2_GPIO 7
-#define PALMTE_MMC3_GPIO 11
+#define PALMTE_DC_GPIO 2
+#define PALMTE_MMC_SWITCH_GPIO 4
+#define PALMTE_MMC1_GPIO 6
+#define PALMTE_MMC2_GPIO 7
+#define PALMTE_MMC3_GPIO 11
static MouseTransformInfo palmte_pointercal = {
.x = 320,
@@ -100,17 +100,17 @@ static struct {
int column;
} palmte_keymap[0x80] = {
[0 ... 0x7f] = { -1, -1 },
- [0x3b] = { 0, 0 }, /* F1 -> Calendar */
- [0x3c] = { 1, 0 }, /* F2 -> Contacts */
- [0x3d] = { 2, 0 }, /* F3 -> Tasks List */
- [0x3e] = { 3, 0 }, /* F4 -> Note Pad */
- [0x01] = { 4, 0 }, /* Esc -> Power */
- [0x4b] = { 0, 1 }, /* Left */
- [0x50] = { 1, 1 }, /* Down */
- [0x48] = { 2, 1 }, /* Up */
- [0x4d] = { 3, 1 }, /* Right */
- [0x4c] = { 4, 1 }, /* Centre */
- [0x39] = { 4, 1 }, /* Spc -> Centre */
+ [0x3b] = { 0, 0 }, /* F1 -> Calendar */
+ [0x3c] = { 1, 0 }, /* F2 -> Contacts */
+ [0x3d] = { 2, 0 }, /* F3 -> Tasks List */
+ [0x3e] = { 3, 0 }, /* F4 -> Note Pad */
+ [0x01] = { 4, 0 }, /* Esc -> Power */
+ [0x4b] = { 0, 1 }, /* Left */
+ [0x50] = { 1, 1 }, /* Down */
+ [0x48] = { 2, 1 }, /* Up */
+ [0x4d] = { 3, 1 }, /* Right */
+ [0x4c] = { 4, 1 }, /* Centre */
+ [0x39] = { 4, 1 }, /* Spc -> Centre */
};
static void palmte_button_event(void *opaque, int keycode)
@@ -161,13 +161,13 @@ static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
[PALMTE_MMC_SWITCH_GPIO]));
misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
- qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
- qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
- qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]);
- qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]);
- qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]);
- omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
- omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
+ qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
+ qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
+ qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]);
+ qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]);
+ qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]);
+ omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
+ omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
/* Reset some inputs to initial state. */
qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
--
2.20.1
next prev parent reply other threads:[~2020-06-28 21:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-28 21:42 [PATCH 0/2] hw/arm/palm.c: Fix Coverity issue CID 1421944 Peter Maydell
2020-06-28 21:42 ` Peter Maydell [this message]
2020-07-12 0:18 ` [PATCH 1/2] hw/arm/palm.c: Detabify Li Qiang
2020-07-13 10:49 ` Philippe Mathieu-Daudé
2020-06-28 21:42 ` [PATCH 2/2] hw/arm/palm.c: Encapsulate misc GPIO handling in a device Peter Maydell
2020-07-12 0:22 ` Li Qiang
2020-07-13 8:57 ` Philippe Mathieu-Daudé
2020-07-13 10:05 ` Peter Maydell
2020-07-13 10:21 ` Philippe Mathieu-Daudé
2020-07-13 10:31 ` Peter Maydell
2020-07-13 10:52 ` Philippe Mathieu-Daudé
2020-07-11 18:33 ` [PATCH 0/2] hw/arm/palm.c: Fix Coverity issue CID 1421944 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200628214230.2592-2-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).