From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
qemu-block@nongnu.org
Subject: [PATCH v7 10/17] hw/sd/sdcard: Check address is in range
Date: Tue, 30 Jun 2020 15:39:04 +0200 [thread overview]
Message-ID: <20200630133912.9428-11-f4bug@amsat.org> (raw)
In-Reply-To: <20200630133912.9428-1-f4bug@amsat.org>
As a defense, assert if the requested address is out of the card area.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sd/sd.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 548745614e..5d1b314a32 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -537,8 +537,10 @@ static void sd_response_r7_make(SDState *sd, uint8_t *response)
stl_be_p(response, sd->vhs);
}
-static inline uint64_t sd_addr_to_wpnum(uint64_t addr)
+static uint64_t sd_addr_to_wpnum(SDState *sd, uint64_t addr)
{
+ assert(addr < sd->size);
+
return addr >> (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT);
}
@@ -773,8 +775,8 @@ static void sd_erase(SDState *sd)
erase_end *= HWBLOCK_SIZE;
}
- erase_start = sd_addr_to_wpnum(erase_start);
- erase_end = sd_addr_to_wpnum(erase_end);
+ erase_start = sd_addr_to_wpnum(sd, erase_start);
+ erase_end = sd_addr_to_wpnum(sd, erase_end);
sd->erase_start = 0;
sd->erase_end = 0;
sd->csd[14] |= 0x40;
@@ -791,7 +793,7 @@ static uint32_t sd_wpbits(SDState *sd, uint64_t addr)
uint32_t i, wpnum;
uint32_t ret = 0;
- wpnum = sd_addr_to_wpnum(addr);
+ wpnum = sd_addr_to_wpnum(sd, addr);
for (i = 0; i < 32; i++, wpnum++, addr += WPGROUP_SIZE) {
if (addr < sd->size && test_bit(wpnum, sd->wp_groups)) {
@@ -833,7 +835,7 @@ static void sd_function_switch(SDState *sd, uint32_t arg)
static inline bool sd_wp_addr(SDState *sd, uint64_t addr)
{
- return test_bit(sd_addr_to_wpnum(addr), sd->wp_groups);
+ return test_bit(sd_addr_to_wpnum(sd, addr), sd->wp_groups);
}
static void sd_lock_command(SDState *sd)
@@ -1345,7 +1347,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
}
sd->state = sd_programming_state;
- set_bit(sd_addr_to_wpnum(addr), sd->wp_groups);
+ set_bit(sd_addr_to_wpnum(sd, addr), sd->wp_groups);
/* Bzzzzzzztt .... Operation complete. */
sd->state = sd_transfer_state;
return sd_r1b;
@@ -1364,7 +1366,7 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
}
sd->state = sd_programming_state;
- clear_bit(sd_addr_to_wpnum(addr), sd->wp_groups);
+ clear_bit(sd_addr_to_wpnum(sd, addr), sd->wp_groups);
/* Bzzzzzzztt .... Operation complete. */
sd->state = sd_transfer_state;
return sd_r1b;
--
2.21.3
next prev parent reply other threads:[~2020-06-30 13:43 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 13:38 [PATCH v7 00/17] hw/sd/sdcard: Fix CVE-2020-13253 & cleanups Philippe Mathieu-Daudé
2020-06-30 13:38 ` [PATCH v7 01/17] MAINTAINERS: Cc qemu-block mailing list Philippe Mathieu-Daudé
2020-07-03 13:29 ` Peter Maydell
2020-06-30 13:38 ` [PATCH v7 02/17] hw/sd/sdcard: Update coding style to make checkpatch.pl happy Philippe Mathieu-Daudé
2020-07-06 16:24 ` Alistair Francis
2020-06-30 13:38 ` [PATCH v7 03/17] hw/sd/sdcard: Move some definitions to use them earlier Philippe Mathieu-Daudé
2020-07-03 13:08 ` Peter Maydell
2020-06-30 13:38 ` [PATCH v7 04/17] hw/sd/sdcard: Use the HWBLOCK_SIZE definition Philippe Mathieu-Daudé
2020-07-03 13:11 ` Peter Maydell
2020-06-30 13:38 ` [PATCH v7 05/17] hw/sd/sdcard: Do not switch to ReceivingData if address is invalid Philippe Mathieu-Daudé
2020-07-03 13:12 ` Peter Maydell
2020-07-06 16:26 ` Alistair Francis
2020-07-07 8:30 ` Philippe Mathieu-Daudé
2020-07-07 10:24 ` Philippe Mathieu-Daudé
2020-07-07 10:34 ` Philippe Mathieu-Daudé
2020-06-30 13:39 ` [PATCH v7 06/17] hw/sd/sdcard: Restrict Class 6 commands to SCSD cards Philippe Mathieu-Daudé
2020-07-06 16:27 ` Alistair Francis
2020-06-30 13:39 ` [PATCH v7 07/17] hw/sd/sdcard: Move sd->size initialization Philippe Mathieu-Daudé
2020-07-03 13:13 ` Peter Maydell
2020-06-30 13:39 ` [PATCH v7 08/17] hw/sd/sdcard: Call sd_addr_to_wpnum where it is used, consider zero size Philippe Mathieu-Daudé
2020-07-03 13:15 ` Peter Maydell
2020-06-30 13:39 ` [PATCH v7 09/17] hw/sd/sdcard: Special case the -ENOMEDIUM error Philippe Mathieu-Daudé
2020-07-03 13:23 ` Peter Maydell
2020-07-03 15:16 ` Philippe Mathieu-Daudé
2020-07-03 23:42 ` Philippe Mathieu-Daudé
2020-07-04 22:10 ` Philippe Mathieu-Daudé
2020-07-04 22:18 ` Philippe Mathieu-Daudé
2020-07-04 22:26 ` Philippe Mathieu-Daudé
2020-07-05 17:33 ` Philippe Mathieu-Daudé
2020-07-06 5:52 ` Markus Armbruster
2020-07-06 9:15 ` Peter Maydell
2020-06-30 13:39 ` Philippe Mathieu-Daudé [this message]
2020-07-03 13:23 ` [PATCH v7 10/17] hw/sd/sdcard: Check address is in range Peter Maydell
2020-06-30 13:39 ` [PATCH v7 11/17] hw/sd/sdcard: Update the SDState documentation Philippe Mathieu-Daudé
2020-07-06 16:28 ` Alistair Francis
2020-06-30 13:39 ` [PATCH v7 12/17] hw/sd/sdcard: Simplify cmd_valid_while_locked() Philippe Mathieu-Daudé
2020-07-06 16:30 ` Alistair Francis
2020-06-30 13:39 ` [PATCH v7 13/17] hw/sd/sdcard: Constify sd_crc*()'s message argument Philippe Mathieu-Daudé
2020-07-03 13:24 ` Peter Maydell
2020-06-30 13:39 ` [PATCH v7 14/17] hw/sd/sdcard: Make iolen unsigned Philippe Mathieu-Daudé
2020-07-03 13:25 ` Peter Maydell
2020-07-06 16:32 ` Alistair Francis
2020-06-30 13:39 ` [PATCH v7 15/17] hw/sd/sdcard: Correctly display the command name in trace events Philippe Mathieu-Daudé
2020-07-03 13:28 ` Peter Maydell
2020-07-03 15:09 ` Philippe Mathieu-Daudé
2020-06-30 13:39 ` [PATCH v7 16/17] hw/sd/sdcard: Display offset in read/write_data() " Philippe Mathieu-Daudé
2020-07-06 16:33 ` Alistair Francis
2020-06-30 13:39 ` [PATCH v7 17/17] hw/sd/sdcard: Simplify realize() a bit Philippe Mathieu-Daudé
2020-07-06 16:34 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200630133912.9428-11-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).