qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Juan Quintela <quintela@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	David Hildenbrand <david@redhat.com>
Subject: [PULL 09/41] virtio-balloon: Rip out qemu_balloon_inhibit()
Date: Fri, 3 Jul 2020 05:03:54 -0400	[thread overview]
Message-ID: <20200703090252.368694-10-mst@redhat.com> (raw)
In-Reply-To: <20200703090252.368694-1-mst@redhat.com>

From: David Hildenbrand <david@redhat.com>

The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.

Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/migration/misc.h   |  2 ++
 include/sysemu/balloon.h   |  2 --
 balloon.c                  | 18 ------------------
 hw/virtio/virtio-balloon.c | 10 ++++++++--
 migration/migration.c      |  7 +++++++
 migration/postcopy-ram.c   | 23 -----------------------
 6 files changed, 17 insertions(+), 45 deletions(-)

diff --git a/include/migration/misc.h b/include/migration/misc.h
index d2762257aa..34e7d75713 100644
--- a/include/migration/misc.h
+++ b/include/migration/misc.h
@@ -69,6 +69,8 @@ bool migration_has_failed(MigrationState *);
 /* ...and after the device transmission */
 bool migration_in_postcopy_after_devices(MigrationState *);
 void migration_global_dump(Monitor *mon);
+/* True if incomming migration entered POSTCOPY_INCOMING_DISCARD */
+bool migration_in_incoming_postcopy(void);
 
 /* migration/block-dirty-bitmap.c */
 void dirty_bitmap_mig_init(void);
diff --git a/include/sysemu/balloon.h b/include/sysemu/balloon.h
index aea0c44985..20a2defe3a 100644
--- a/include/sysemu/balloon.h
+++ b/include/sysemu/balloon.h
@@ -23,7 +23,5 @@ typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info);
 int qemu_add_balloon_handler(QEMUBalloonEvent *event_func,
                              QEMUBalloonStatus *stat_func, void *opaque);
 void qemu_remove_balloon_handler(void *opaque);
-bool qemu_balloon_is_inhibited(void);
-void qemu_balloon_inhibit(bool state);
 
 #endif
diff --git a/balloon.c b/balloon.c
index 5fff79523a..354408c6ea 100644
--- a/balloon.c
+++ b/balloon.c
@@ -36,24 +36,6 @@
 static QEMUBalloonEvent *balloon_event_fn;
 static QEMUBalloonStatus *balloon_stat_fn;
 static void *balloon_opaque;
-static int balloon_inhibit_count;
-
-bool qemu_balloon_is_inhibited(void)
-{
-    return atomic_read(&balloon_inhibit_count) > 0 ||
-           ram_block_discard_is_disabled();
-}
-
-void qemu_balloon_inhibit(bool state)
-{
-    if (state) {
-        atomic_inc(&balloon_inhibit_count);
-    } else {
-        atomic_dec(&balloon_inhibit_count);
-    }
-
-    assert(atomic_read(&balloon_inhibit_count) >= 0);
-}
 
 static bool have_balloon(Error **errp)
 {
diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index 8a84718490..ae31f0817a 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -63,6 +63,12 @@ static bool virtio_balloon_pbp_matches(PartiallyBalloonedPage *pbp,
     return pbp->base_gpa == base_gpa;
 }
 
+static bool virtio_balloon_inhibited(void)
+{
+    /* Postcopy cannot deal with concurrent discards, so it's special. */
+    return ram_block_discard_is_disabled() || migration_in_incoming_postcopy();
+}
+
 static void balloon_inflate_page(VirtIOBalloon *balloon,
                                  MemoryRegion *mr, hwaddr mr_offset,
                                  PartiallyBalloonedPage *pbp)
@@ -336,7 +342,7 @@ static void virtio_balloon_handle_report(VirtIODevice *vdev, VirtQueue *vq)
          * accessible by another device or process, or if the guest is
          * expecting it to retain a non-zero value.
          */
-        if (qemu_balloon_is_inhibited() || dev->poison_val) {
+        if (virtio_balloon_inhibited() || dev->poison_val) {
             goto skip_element;
         }
 
@@ -421,7 +427,7 @@ static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
 
             trace_virtio_balloon_handle_output(memory_region_name(section.mr),
                                                pa);
-            if (!qemu_balloon_is_inhibited()) {
+            if (!virtio_balloon_inhibited()) {
                 if (vq == s->ivq) {
                     balloon_inflate_page(s, section.mr,
                                          section.offset_within_region, &pbp);
diff --git a/migration/migration.c b/migration/migration.c
index 481a590f72..d365d82209 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1772,6 +1772,13 @@ bool migration_in_postcopy_after_devices(MigrationState *s)
     return migration_in_postcopy() && s->postcopy_after_devices;
 }
 
+bool migration_in_incoming_postcopy(void)
+{
+    PostcopyState ps = postcopy_state_get();
+
+    return ps >= POSTCOPY_INCOMING_DISCARD && ps < POSTCOPY_INCOMING_END;
+}
+
 bool migration_is_idle(void)
 {
     MigrationState *s = current_migration;
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index a36402722b..b41a9fe2fd 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -27,7 +27,6 @@
 #include "qemu/notify.h"
 #include "qemu/rcu.h"
 #include "sysemu/sysemu.h"
-#include "sysemu/balloon.h"
 #include "qemu/error-report.h"
 #include "trace.h"
 #include "hw/boards.h"
@@ -520,20 +519,6 @@ int postcopy_ram_incoming_init(MigrationIncomingState *mis)
     return 0;
 }
 
-/*
- * Manage a single vote to the QEMU balloon inhibitor for all postcopy usage,
- * last caller wins.
- */
-static void postcopy_balloon_inhibit(bool state)
-{
-    static bool cur_state = false;
-
-    if (state != cur_state) {
-        qemu_balloon_inhibit(state);
-        cur_state = state;
-    }
-}
-
 /*
  * At the end of a migration where postcopy_ram_incoming_init was called.
  */
@@ -565,8 +550,6 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis)
         mis->have_fault_thread = false;
     }
 
-    postcopy_balloon_inhibit(false);
-
     if (enable_mlock) {
         if (os_mlock() < 0) {
             error_report("mlock: %s", strerror(errno));
@@ -1160,12 +1143,6 @@ int postcopy_ram_incoming_setup(MigrationIncomingState *mis)
     }
     memset(mis->postcopy_tmp_zero_page, '\0', mis->largest_page_size);
 
-    /*
-     * Ballooning can mark pages as absent while we're postcopying
-     * that would cause false userfaults.
-     */
-    postcopy_balloon_inhibit(true);
-
     trace_postcopy_ram_enable_notify();
 
     return 0;
-- 
MST



  parent reply	other threads:[~2020-07-03  9:07 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  9:03 [PULL 00/41] virtio,acpi: features, fixes, cleanups Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 01/41] tests: disassemble-aml.sh: generate AML in readable format Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 02/41] Revert "tests/migration: Reduce autoconverge initial bandwidth" Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 03/41] virtio-balloon: always indicate S_DONE when migration fails Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 04/41] pc: Support coldplugging of virtio-pmem-pci devices on all buses Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 05/41] exec: Introduce ram_block_discard_(disable|require)() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 06/41] vfio: Convert to ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 07/41] accel/kvm: " Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 08/41] s390x/pv: " Michael S. Tsirkin
2020-07-03  9:03 ` Michael S. Tsirkin [this message]
2020-07-03  9:03 ` [PULL 10/41] target/i386: sev: Use ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 11/41] migration/rdma: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 12/41] migration/colo: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 13/41] virtio-mem: Paravirtualized memory hot(un)plug Michael S. Tsirkin
2020-07-03  9:18   ` David Hildenbrand
2020-07-03  9:32     ` David Hildenbrand
2020-07-03 10:23     ` Michael S. Tsirkin
2020-07-03 10:24       ` David Hildenbrand
2020-07-03  9:04 ` [PULL 14/41] virtio-pci: Proxy for virtio-mem Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 15/41] MAINTAINERS: Add myself as virtio-mem maintainer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 16/41] hmp: Handle virtio-mem when printing memory device info Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 17/41] numa: Handle virtio-mem in NUMA stats Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 18/41] pc: Support for virtio-mem-pci Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 19/41] virtio-mem: Allow notifiers for size changes Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 20/41] virtio-pci: Send qapi events when the virtio-mem " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 21/41] virtio-mem: Migration sanity checks Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 22/41] virtio-mem: Add trace events Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 23/41] virtio-mem: Exclude unplugged memory during migration Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 24/41] numa: Auto-enable NUMA when any memory devices are possible Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 25/41] tests/acpi: remove stale allowed tables Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 26/41] docs: vhost-user: add Virtio status protocol feature Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 27/41] MAINTAINERS: add VT-d entry Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 28/41] net: introduce qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 29/41] vhost_net: use the function qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 30/41] virtio-bus: introduce queue_enabled method Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 31/41] virtio-pci: implement " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 32/41] vhost: check the existence of vhost_set_iotlb_callback Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 33/41] vhost: introduce new VhostOps vhost_dev_start Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 34/41] vhost: implement vhost_dev_start method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 35/41] vhost: introduce new VhostOps vhost_vq_get_addr Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 36/41] vhost: implement vhost_vq_get_addr method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 37/41] vhost: introduce new VhostOps vhost_force_iommu Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 38/41] vhost: implement vhost_force_iommu method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 39/41] vhost_net: introduce set_config & get_config Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 40/41] vhost-vdpa: introduce vhost-vdpa backend Michael S. Tsirkin
2020-07-08  0:07   ` Bruce Rogers
2020-07-08  4:17     ` Cindy Lu
2020-07-03  9:05 ` [PULL 41/41] vhost-vdpa: introduce vhost-vdpa net client Michael S. Tsirkin
2020-07-03  9:31 ` [PULL 00/41] virtio,acpi: features, fixes, cleanups no-reply
2020-07-03 11:58 ` Michael S. Tsirkin
2020-07-04 14:05 ` Peter Maydell
2020-07-04 18:36   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703090252.368694-10-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=david@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).