qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	David Hildenbrand <david@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>
Subject: [PULL 20/41] virtio-pci: Send qapi events when the virtio-mem size changes
Date: Fri, 3 Jul 2020 05:04:24 -0400	[thread overview]
Message-ID: <20200703090252.368694-21-mst@redhat.com> (raw)
In-Reply-To: <20200703090252.368694-1-mst@redhat.com>

From: David Hildenbrand <david@redhat.com>

Let's register the notifier and trigger the qapi event with the right
device id.

MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.

Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qapi/misc.json             | 25 +++++++++++++++++++++++++
 hw/virtio/virtio-mem-pci.h |  1 +
 hw/virtio/virtio-mem-pci.c | 28 ++++++++++++++++++++++++++++
 monitor/monitor.c          |  1 +
 4 files changed, 55 insertions(+)

diff --git a/qapi/misc.json b/qapi/misc.json
index 65ca3edf32..149c925246 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -1434,6 +1434,31 @@
 ##
 { 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
 
+##
+# @MEMORY_DEVICE_SIZE_CHANGE:
+#
+# Emitted when the size of a memory device changes. Only emitted for memory
+# devices that can actually change the size (e.g., virtio-mem due to guest
+# action).
+#
+# @id: device's ID
+# @size: the new size of memory that the device provides
+#
+# Note: this event is rate-limited.
+#
+# Since: 5.1
+#
+# Example:
+#
+# <- { "event": "MEMORY_DEVICE_SIZE_CHANGE",
+#      "data": { "id": "vm0", "size": 1073741824},
+#      "timestamp": { "seconds": 1588168529, "microseconds": 201316 } }
+#
+##
+{ 'event': 'MEMORY_DEVICE_SIZE_CHANGE',
+  'data': { '*id': 'str', 'size': 'size' } }
+
+
 ##
 # @MEM_UNPLUG_ERROR:
 #
diff --git a/hw/virtio/virtio-mem-pci.h b/hw/virtio/virtio-mem-pci.h
index 8820cd6628..b51a28b275 100644
--- a/hw/virtio/virtio-mem-pci.h
+++ b/hw/virtio/virtio-mem-pci.h
@@ -28,6 +28,7 @@ typedef struct VirtIOMEMPCI VirtIOMEMPCI;
 struct VirtIOMEMPCI {
     VirtIOPCIProxy parent_obj;
     VirtIOMEM vdev;
+    Notifier size_change_notifier;
 };
 
 #endif /* QEMU_VIRTIO_MEM_PCI_H */
diff --git a/hw/virtio/virtio-mem-pci.c b/hw/virtio/virtio-mem-pci.c
index b325303b32..1a8e854123 100644
--- a/hw/virtio/virtio-mem-pci.c
+++ b/hw/virtio/virtio-mem-pci.c
@@ -14,6 +14,7 @@
 #include "virtio-mem-pci.h"
 #include "hw/mem/memory-device.h"
 #include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
 
 static void virtio_mem_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
 {
@@ -74,6 +75,21 @@ static void virtio_mem_pci_fill_device_info(const MemoryDeviceState *md,
     info->type = MEMORY_DEVICE_INFO_KIND_VIRTIO_MEM;
 }
 
+static void virtio_mem_pci_size_change_notify(Notifier *notifier, void *data)
+{
+    VirtIOMEMPCI *pci_mem = container_of(notifier, VirtIOMEMPCI,
+                                         size_change_notifier);
+    DeviceState *dev = DEVICE(pci_mem);
+    const uint64_t * const size_p = data;
+    const char *id = NULL;
+
+    if (dev->id) {
+        id = g_strdup(dev->id);
+    }
+
+    qapi_event_send_memory_device_size_change(!!id, id, *size_p);
+}
+
 static void virtio_mem_pci_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -98,9 +114,21 @@ static void virtio_mem_pci_class_init(ObjectClass *klass, void *data)
 static void virtio_mem_pci_instance_init(Object *obj)
 {
     VirtIOMEMPCI *dev = VIRTIO_MEM_PCI(obj);
+    VirtIOMEMClass *vmc;
+    VirtIOMEM *vmem;
 
     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
                                 TYPE_VIRTIO_MEM);
+
+    dev->size_change_notifier.notify = virtio_mem_pci_size_change_notify;
+    vmem = VIRTIO_MEM(&dev->vdev);
+    vmc = VIRTIO_MEM_GET_CLASS(vmem);
+    /*
+     * We never remove the notifier again, as we expect both devices to
+     * disappear at the same time.
+     */
+    vmc->add_size_change_notifier(vmem, &dev->size_change_notifier);
+
     object_property_add_alias(obj, VIRTIO_MEM_BLOCK_SIZE_PROP,
                               OBJECT(&dev->vdev), VIRTIO_MEM_BLOCK_SIZE_PROP);
     object_property_add_alias(obj, VIRTIO_MEM_SIZE_PROP, OBJECT(&dev->vdev),
diff --git a/monitor/monitor.c b/monitor/monitor.c
index 125494410a..19dcb8fbe3 100644
--- a/monitor/monitor.c
+++ b/monitor/monitor.c
@@ -235,6 +235,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = {
     [QAPI_EVENT_QUORUM_REPORT_BAD] = { 1000 * SCALE_MS },
     [QAPI_EVENT_QUORUM_FAILURE]    = { 1000 * SCALE_MS },
     [QAPI_EVENT_VSERPORT_CHANGE]   = { 1000 * SCALE_MS },
+    [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS },
 };
 
 /*
-- 
MST



  parent reply	other threads:[~2020-07-03  9:12 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  9:03 [PULL 00/41] virtio,acpi: features, fixes, cleanups Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 01/41] tests: disassemble-aml.sh: generate AML in readable format Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 02/41] Revert "tests/migration: Reduce autoconverge initial bandwidth" Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 03/41] virtio-balloon: always indicate S_DONE when migration fails Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 04/41] pc: Support coldplugging of virtio-pmem-pci devices on all buses Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 05/41] exec: Introduce ram_block_discard_(disable|require)() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 06/41] vfio: Convert to ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 07/41] accel/kvm: " Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 08/41] s390x/pv: " Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 09/41] virtio-balloon: Rip out qemu_balloon_inhibit() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 10/41] target/i386: sev: Use ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 11/41] migration/rdma: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 12/41] migration/colo: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 13/41] virtio-mem: Paravirtualized memory hot(un)plug Michael S. Tsirkin
2020-07-03  9:18   ` David Hildenbrand
2020-07-03  9:32     ` David Hildenbrand
2020-07-03 10:23     ` Michael S. Tsirkin
2020-07-03 10:24       ` David Hildenbrand
2020-07-03  9:04 ` [PULL 14/41] virtio-pci: Proxy for virtio-mem Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 15/41] MAINTAINERS: Add myself as virtio-mem maintainer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 16/41] hmp: Handle virtio-mem when printing memory device info Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 17/41] numa: Handle virtio-mem in NUMA stats Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 18/41] pc: Support for virtio-mem-pci Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 19/41] virtio-mem: Allow notifiers for size changes Michael S. Tsirkin
2020-07-03  9:04 ` Michael S. Tsirkin [this message]
2020-07-03  9:04 ` [PULL 21/41] virtio-mem: Migration sanity checks Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 22/41] virtio-mem: Add trace events Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 23/41] virtio-mem: Exclude unplugged memory during migration Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 24/41] numa: Auto-enable NUMA when any memory devices are possible Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 25/41] tests/acpi: remove stale allowed tables Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 26/41] docs: vhost-user: add Virtio status protocol feature Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 27/41] MAINTAINERS: add VT-d entry Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 28/41] net: introduce qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 29/41] vhost_net: use the function qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 30/41] virtio-bus: introduce queue_enabled method Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 31/41] virtio-pci: implement " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 32/41] vhost: check the existence of vhost_set_iotlb_callback Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 33/41] vhost: introduce new VhostOps vhost_dev_start Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 34/41] vhost: implement vhost_dev_start method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 35/41] vhost: introduce new VhostOps vhost_vq_get_addr Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 36/41] vhost: implement vhost_vq_get_addr method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 37/41] vhost: introduce new VhostOps vhost_force_iommu Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 38/41] vhost: implement vhost_force_iommu method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 39/41] vhost_net: introduce set_config & get_config Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 40/41] vhost-vdpa: introduce vhost-vdpa backend Michael S. Tsirkin
2020-07-08  0:07   ` Bruce Rogers
2020-07-08  4:17     ` Cindy Lu
2020-07-03  9:05 ` [PULL 41/41] vhost-vdpa: introduce vhost-vdpa net client Michael S. Tsirkin
2020-07-03  9:31 ` [PULL 00/41] virtio,acpi: features, fixes, cleanups no-reply
2020-07-03 11:58 ` Michael S. Tsirkin
2020-07-04 14:05 ` Peter Maydell
2020-07-04 18:36   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703090252.368694-21-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=armbru@redhat.com \
    --cc=david@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).