From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 29/53] target/i386: remove gen_io_end
Date: Mon, 6 Jul 2020 12:41:31 -0400 [thread overview]
Message-ID: <20200706164155.24696-30-pbonzini@redhat.com> (raw)
In-Reply-To: <20200706164155.24696-1-pbonzini@redhat.com>
Force the end of a translation block after an I/O instruction in
icount mode. For consistency, all CF_USE_ICOUNT code is kept in
disas_insn instead of having it in gen_ins and gen_outs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/translate.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/target/i386/translate.c b/target/i386/translate.c
index b3fea54411..5ef72ff401 100644
--- a/target/i386/translate.c
+++ b/target/i386/translate.c
@@ -1128,9 +1128,6 @@ static void gen_bpt_io(DisasContext *s, TCGv_i32 t_port, int ot)
static inline void gen_ins(DisasContext *s, MemOp ot)
{
- if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_start();
- }
gen_string_movl_A0_EDI(s);
/* Note: we must do this dummy write first to be restartable in
case of page fault. */
@@ -1143,16 +1140,10 @@ static inline void gen_ins(DisasContext *s, MemOp ot)
gen_op_movl_T0_Dshift(s, ot);
gen_op_add_reg_T0(s, s->aflag, R_EDI);
gen_bpt_io(s, s->tmp2_i32, ot);
- if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_end();
- }
}
static inline void gen_outs(DisasContext *s, MemOp ot)
{
- if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_start();
- }
gen_string_movl_A0_ESI(s);
gen_op_ld_v(s, ot, s->T0, s->A0);
@@ -1163,9 +1154,6 @@ static inline void gen_outs(DisasContext *s, MemOp ot)
gen_op_movl_T0_Dshift(s, ot);
gen_op_add_reg_T0(s, s->aflag, R_ESI);
gen_bpt_io(s, s->tmp2_i32, ot);
- if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_end();
- }
}
/* same method as Valgrind : we generate jumps to current or next
@@ -6400,8 +6388,12 @@ static target_ulong disas_insn(DisasContext *s, CPUState *cpu)
tcg_gen_ext16u_tl(s->T0, cpu_regs[R_EDX]);
gen_check_io(s, ot, pc_start - s->cs_base,
SVM_IOIO_TYPE_MASK | svm_is_rep(prefixes) | 4);
+ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
if (prefixes & (PREFIX_REPZ | PREFIX_REPNZ)) {
gen_repz_ins(s, ot, pc_start - s->cs_base, s->pc - s->cs_base);
+ /* jump generated by gen_repz_ins */
} else {
gen_ins(s, ot);
if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
@@ -6415,8 +6407,12 @@ static target_ulong disas_insn(DisasContext *s, CPUState *cpu)
tcg_gen_ext16u_tl(s->T0, cpu_regs[R_EDX]);
gen_check_io(s, ot, pc_start - s->cs_base,
svm_is_rep(prefixes) | 4);
+ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
if (prefixes & (PREFIX_REPZ | PREFIX_REPNZ)) {
gen_repz_outs(s, ot, pc_start - s->cs_base, s->pc - s->cs_base);
+ /* jump generated by gen_repz_outs */
} else {
gen_outs(s, ot);
if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
@@ -8039,7 +8035,7 @@ static target_ulong disas_insn(DisasContext *s, CPUState *cpu)
gen_helper_read_crN(s->T0, cpu_env, tcg_const_i32(reg));
gen_op_mov_reg_v(s, ot, rm, s->T0);
if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_end();
+ gen_jmp(s, s->pc - s->cs_base);
}
}
break;
--
2.26.2
next prev parent reply other threads:[~2020-07-06 17:04 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-06 16:41 [PULL 00/53] Misc patches for QEMU 5.1 soft freeze Paolo Bonzini
2020-07-06 16:41 ` [PULL 01/53] tcg/svm: use host cr4 during NPT page table walk Paolo Bonzini
2020-07-06 16:41 ` [PULL 02/53] tests: Inject test name also when the test fails Paolo Bonzini
2020-07-06 16:41 ` [PULL 03/53] util/qemu-error: prepend guest name to error message to identify affected VM owner Paolo Bonzini
2020-07-06 16:41 ` [PULL 04/53] qom: Introduce object_property_try_add_child() Paolo Bonzini
2020-07-06 16:41 ` [PULL 05/53] tests/qmp-cmd-test: Add qmp/object-add-duplicate-id Paolo Bonzini
2020-07-06 16:41 ` [PULL 06/53] tests/qmp-cmd-test: Add qmp/object-add-failure-modes Paolo Bonzini
2020-07-06 16:41 ` [PULL 07/53] hw/core/null-machine: Do not initialize unused chardev backends Paolo Bonzini
2020-07-06 16:41 ` [PULL 08/53] target/i386: set SSE FTZ in correct floating-point state Paolo Bonzini
2020-07-06 16:41 ` [PULL 09/53] target/i386: fix IEEE SSE floating-point exception raising Paolo Bonzini
2020-07-06 16:41 ` [PULL 10/53] KVM: add support for AMD nested live migration Paolo Bonzini
2020-07-06 16:41 ` [PULL 11/53] coverity: provide Coverity-friendly MIN_CONST and MAX_CONST Paolo Bonzini
2020-07-06 16:41 ` [PULL 12/53] i386: hvf: Set env->eip in macvm_set_rip() Paolo Bonzini
2020-07-06 16:41 ` [PULL 13/53] i386: hvf: Move synchronize functions to sysemu Paolo Bonzini
2020-07-06 16:41 ` [PULL 14/53] i386: hvf: Add hvf_cpu_synchronize_pre_loadvm() Paolo Bonzini
2020-07-06 16:41 ` [PULL 15/53] i386: hvf: Make long mode enter and exit clearer Paolo Bonzini
2020-07-06 16:41 ` [PULL 16/53] i386: hvf: Move Guest LMA reset to macvm_set_cr0() Paolo Bonzini
2020-07-06 16:41 ` [PULL 17/53] i386: hvf: Don't duplicate register reset Paolo Bonzini
2020-07-06 16:41 ` [PULL 18/53] i386: hvf: Clean up synchronize functions Paolo Bonzini
2020-07-06 16:41 ` [PULL 19/53] MAINTAINERS: Add Cameron as HVF co-maintainer Paolo Bonzini
2020-07-06 16:41 ` [PULL 20/53] MAINTAINERS: Fix KVM path expansion glob Paolo Bonzini
2020-07-06 16:41 ` [PULL 21/53] MAINTAINERS: Add an 'overall' entry for accelerators Paolo Bonzini
2020-07-06 16:41 ` [PULL 22/53] MAINTAINERS: Cover the HAX accelerator stub Paolo Bonzini
2020-07-06 16:41 ` [PULL 23/53] Makefile: Remove dangerous EOL trailing backslash Paolo Bonzini
2020-07-06 16:41 ` [PULL 24/53] Makefile: Write MINIKCONF variables as one entry per line Paolo Bonzini
2020-07-06 16:41 ` [PULL 25/53] accel/Kconfig: Extract accel selectors into their own config Paolo Bonzini
2020-07-06 16:41 ` [PULL 26/53] accel/Kconfig: Add the TCG selector Paolo Bonzini
2020-07-06 16:41 ` [PULL 27/53] accel/tcg: Add stub for probe_access() Paolo Bonzini
2020-07-06 16:41 ` [PULL 28/53] Makefile: simplify MINIKCONF rules Paolo Bonzini
2020-07-17 11:02 ` Peter Maydell
2020-07-17 11:20 ` Paolo Bonzini
2020-07-17 13:01 ` Peter Maydell
2020-07-17 13:33 ` Paolo Bonzini
2020-07-06 16:41 ` Paolo Bonzini [this message]
2020-07-06 16:41 ` [PULL 30/53] target/i386: implement undocumented "smsw r32" behavior Paolo Bonzini
2020-07-06 16:41 ` [PULL 31/53] KVM: x86: believe what KVM says about WAITPKG Paolo Bonzini
2020-07-07 11:42 ` Maxim Levitsky
2020-07-07 11:58 ` Paolo Bonzini
2021-12-22 9:35 ` Chenyi Qiang
2020-07-06 16:41 ` [PULL 32/53] target/i386: sev: provide proper error reporting for query-sev-capabilities Paolo Bonzini
2020-07-06 16:41 ` [PULL 33/53] target/i386: sev: fail query-sev-capabilities if QEMU cannot use SEV Paolo Bonzini
2020-07-06 16:41 ` [PULL 34/53] iscsi: handle check condition status in retry loop Paolo Bonzini
2020-07-06 16:41 ` [PULL 35/53] iscsi: return -EIO when sense fields are meaningless Paolo Bonzini
2020-07-06 16:41 ` [PULL 36/53] chardev/tcp: fix error message double free error Paolo Bonzini
2020-07-06 16:41 ` [PULL 37/53] checkpatch: Change occurences of 'kernel' to 'qemu' in user messages Paolo Bonzini
2020-07-06 16:41 ` [PULL 38/53] target/i386: Correct the warning message of Intel PT Paolo Bonzini
2020-07-06 16:41 ` [PULL 39/53] cpus: Move CPU code from exec.c to cpus-common.c Paolo Bonzini
2020-07-06 16:41 ` [PULL 40/53] pc: fix leak in pc_system_flash_cleanup_unused Paolo Bonzini
2020-07-06 16:41 ` [PULL 41/53] softmmu: move softmmu only files from root Paolo Bonzini
2020-07-06 16:41 ` [PULL 42/53] cpu-throttle: new module, extracted from cpus.c Paolo Bonzini
2020-07-06 16:41 ` [PULL 43/53] cpu-timers, icount: new modules Paolo Bonzini
2020-07-06 16:41 ` [PULL 44/53] softmmu/vl: Remove the check for colons in -accel parameters Paolo Bonzini
2020-07-06 16:41 ` [PULL 45/53] accel/kvm: Let kvm_check_extension use global KVM state Paolo Bonzini
2020-07-06 16:41 ` [PULL 46/53] accel/kvm: Simplify kvm_check_extension() Paolo Bonzini
2020-07-06 16:41 ` [PULL 47/53] accel/kvm: Simplify kvm_check_extension_list() Paolo Bonzini
2020-07-06 16:41 ` [PULL 48/53] target/i386/kvm: Simplify get_para_features() Paolo Bonzini
2020-07-06 16:41 ` [PULL 49/53] target/i386/kvm: Simplify kvm_get_mce_cap_supported() Paolo Bonzini
2020-07-06 16:41 ` [PULL 50/53] target/i386/kvm: Simplify kvm_get_supported_[feature]_msrs() Paolo Bonzini
2020-07-06 16:41 ` [PULL 51/53] target/i386: Add SERIALIZE cpu feature Paolo Bonzini
2020-07-06 16:41 ` [PULL 52/53] target/i386: Enable TSX Suspend Load Address Tracking feature Paolo Bonzini
2020-07-06 16:41 ` [PULL 53/53] scripts: improve message when TAP based tests fail Paolo Bonzini
2020-07-06 17:19 ` [PULL 00/53] Misc patches for QEMU 5.1 soft freeze no-reply
2020-07-07 18:37 ` Peter Maydell
2020-07-07 18:42 ` Peter Maydell
2020-07-07 18:48 ` Paolo Bonzini
2020-07-08 8:25 ` Philippe Mathieu-Daudé
2020-07-08 16:13 ` Claudio Fontana
2020-07-08 16:16 ` Paolo Bonzini
2020-07-08 16:45 ` Claudio Fontana
2020-07-08 16:55 ` Paolo Bonzini
2020-07-08 17:03 ` Claudio Fontana
2020-07-08 18:25 ` Claudio Fontana
2020-07-08 18:34 ` Claudio Fontana
2020-07-08 18:41 ` Paolo Bonzini
2020-07-09 6:59 ` Claudio Fontana
2020-07-09 9:57 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200706164155.24696-30-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).