From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org, Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PULL 31/53] KVM: x86: believe what KVM says about WAITPKG
Date: Mon, 6 Jul 2020 12:41:33 -0400 [thread overview]
Message-ID: <20200706164155.24696-32-pbonzini@redhat.com> (raw)
In-Reply-To: <20200706164155.24696-1-pbonzini@redhat.com>
Currently, QEMU is overriding KVM_GET_SUPPORTED_CPUID's answer for
the WAITPKG bit depending on the "-overcommit cpu-pm" setting. This is a
bad idea because it does not even check if the host supports it, but it
can be done in x86_cpu_realizefn just like we do for the MONITOR bit.
This patch moves it there, while making it conditional on host
support for the related UMWAIT MSR.
Cc: qemu-stable@nongnu.org
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.c | 3 +++
target/i386/kvm.c | 11 +++++------
target/i386/kvm_i386.h | 1 +
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/target/i386/cpu.c b/target/i386/cpu.c
index c44cc510e1..dc9ba06f1f 100644
--- a/target/i386/cpu.c
+++ b/target/i386/cpu.c
@@ -6536,6 +6536,9 @@ static void x86_cpu_realizefn(DeviceState *dev, Error **errp)
host_cpuid(5, 0, &cpu->mwait.eax, &cpu->mwait.ebx,
&cpu->mwait.ecx, &cpu->mwait.edx);
env->features[FEAT_1_ECX] |= CPUID_EXT_MONITOR;
+ if (kvm_enabled() && kvm_has_waitpkg()) {
+ env->features[FEAT_7_0_ECX] |= CPUID_7_0_ECX_WAITPKG;
+ }
}
if (kvm_enabled() && cpu->ucode_rev == 0) {
cpu->ucode_rev = kvm_arch_get_supported_msr_feature(kvm_state,
diff --git a/target/i386/kvm.c b/target/i386/kvm.c
index 2b6b7443d2..b8455c89ed 100644
--- a/target/i386/kvm.c
+++ b/target/i386/kvm.c
@@ -411,12 +411,6 @@ uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
if (host_tsx_blacklisted()) {
ret &= ~(CPUID_7_0_EBX_RTM | CPUID_7_0_EBX_HLE);
}
- } else if (function == 7 && index == 0 && reg == R_ECX) {
- if (enable_cpu_pm) {
- ret |= CPUID_7_0_ECX_WAITPKG;
- } else {
- ret &= ~CPUID_7_0_ECX_WAITPKG;
- }
} else if (function == 7 && index == 0 && reg == R_EDX) {
/*
* Linux v4.17-v4.20 incorrectly return ARCH_CAPABILITIES on SVM hosts.
@@ -4730,3 +4724,8 @@ int kvm_arch_msi_data_to_gsi(uint32_t data)
{
abort();
}
+
+bool kvm_has_waitpkg(void)
+{
+ return has_msr_umwait;
+}
diff --git a/target/i386/kvm_i386.h b/target/i386/kvm_i386.h
index 00bde7acaf..064b8798a2 100644
--- a/target/i386/kvm_i386.h
+++ b/target/i386/kvm_i386.h
@@ -44,6 +44,7 @@ void kvm_put_apicbase(X86CPU *cpu, uint64_t value);
bool kvm_enable_x2apic(void);
bool kvm_has_x2apic_api(void);
+bool kvm_has_waitpkg(void);
bool kvm_hv_vpindex_settable(void);
--
2.26.2
next prev parent reply other threads:[~2020-07-06 16:54 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-06 16:41 [PULL 00/53] Misc patches for QEMU 5.1 soft freeze Paolo Bonzini
2020-07-06 16:41 ` [PULL 01/53] tcg/svm: use host cr4 during NPT page table walk Paolo Bonzini
2020-07-06 16:41 ` [PULL 02/53] tests: Inject test name also when the test fails Paolo Bonzini
2020-07-06 16:41 ` [PULL 03/53] util/qemu-error: prepend guest name to error message to identify affected VM owner Paolo Bonzini
2020-07-06 16:41 ` [PULL 04/53] qom: Introduce object_property_try_add_child() Paolo Bonzini
2020-07-06 16:41 ` [PULL 05/53] tests/qmp-cmd-test: Add qmp/object-add-duplicate-id Paolo Bonzini
2020-07-06 16:41 ` [PULL 06/53] tests/qmp-cmd-test: Add qmp/object-add-failure-modes Paolo Bonzini
2020-07-06 16:41 ` [PULL 07/53] hw/core/null-machine: Do not initialize unused chardev backends Paolo Bonzini
2020-07-06 16:41 ` [PULL 08/53] target/i386: set SSE FTZ in correct floating-point state Paolo Bonzini
2020-07-06 16:41 ` [PULL 09/53] target/i386: fix IEEE SSE floating-point exception raising Paolo Bonzini
2020-07-06 16:41 ` [PULL 10/53] KVM: add support for AMD nested live migration Paolo Bonzini
2020-07-06 16:41 ` [PULL 11/53] coverity: provide Coverity-friendly MIN_CONST and MAX_CONST Paolo Bonzini
2020-07-06 16:41 ` [PULL 12/53] i386: hvf: Set env->eip in macvm_set_rip() Paolo Bonzini
2020-07-06 16:41 ` [PULL 13/53] i386: hvf: Move synchronize functions to sysemu Paolo Bonzini
2020-07-06 16:41 ` [PULL 14/53] i386: hvf: Add hvf_cpu_synchronize_pre_loadvm() Paolo Bonzini
2020-07-06 16:41 ` [PULL 15/53] i386: hvf: Make long mode enter and exit clearer Paolo Bonzini
2020-07-06 16:41 ` [PULL 16/53] i386: hvf: Move Guest LMA reset to macvm_set_cr0() Paolo Bonzini
2020-07-06 16:41 ` [PULL 17/53] i386: hvf: Don't duplicate register reset Paolo Bonzini
2020-07-06 16:41 ` [PULL 18/53] i386: hvf: Clean up synchronize functions Paolo Bonzini
2020-07-06 16:41 ` [PULL 19/53] MAINTAINERS: Add Cameron as HVF co-maintainer Paolo Bonzini
2020-07-06 16:41 ` [PULL 20/53] MAINTAINERS: Fix KVM path expansion glob Paolo Bonzini
2020-07-06 16:41 ` [PULL 21/53] MAINTAINERS: Add an 'overall' entry for accelerators Paolo Bonzini
2020-07-06 16:41 ` [PULL 22/53] MAINTAINERS: Cover the HAX accelerator stub Paolo Bonzini
2020-07-06 16:41 ` [PULL 23/53] Makefile: Remove dangerous EOL trailing backslash Paolo Bonzini
2020-07-06 16:41 ` [PULL 24/53] Makefile: Write MINIKCONF variables as one entry per line Paolo Bonzini
2020-07-06 16:41 ` [PULL 25/53] accel/Kconfig: Extract accel selectors into their own config Paolo Bonzini
2020-07-06 16:41 ` [PULL 26/53] accel/Kconfig: Add the TCG selector Paolo Bonzini
2020-07-06 16:41 ` [PULL 27/53] accel/tcg: Add stub for probe_access() Paolo Bonzini
2020-07-06 16:41 ` [PULL 28/53] Makefile: simplify MINIKCONF rules Paolo Bonzini
2020-07-17 11:02 ` Peter Maydell
2020-07-17 11:20 ` Paolo Bonzini
2020-07-17 13:01 ` Peter Maydell
2020-07-17 13:33 ` Paolo Bonzini
2020-07-06 16:41 ` [PULL 29/53] target/i386: remove gen_io_end Paolo Bonzini
2020-07-06 16:41 ` [PULL 30/53] target/i386: implement undocumented "smsw r32" behavior Paolo Bonzini
2020-07-06 16:41 ` Paolo Bonzini [this message]
2020-07-07 11:42 ` [PULL 31/53] KVM: x86: believe what KVM says about WAITPKG Maxim Levitsky
2020-07-07 11:58 ` Paolo Bonzini
2021-12-22 9:35 ` Chenyi Qiang
2020-07-06 16:41 ` [PULL 32/53] target/i386: sev: provide proper error reporting for query-sev-capabilities Paolo Bonzini
2020-07-06 16:41 ` [PULL 33/53] target/i386: sev: fail query-sev-capabilities if QEMU cannot use SEV Paolo Bonzini
2020-07-06 16:41 ` [PULL 34/53] iscsi: handle check condition status in retry loop Paolo Bonzini
2020-07-06 16:41 ` [PULL 35/53] iscsi: return -EIO when sense fields are meaningless Paolo Bonzini
2020-07-06 16:41 ` [PULL 36/53] chardev/tcp: fix error message double free error Paolo Bonzini
2020-07-06 16:41 ` [PULL 37/53] checkpatch: Change occurences of 'kernel' to 'qemu' in user messages Paolo Bonzini
2020-07-06 16:41 ` [PULL 38/53] target/i386: Correct the warning message of Intel PT Paolo Bonzini
2020-07-06 16:41 ` [PULL 39/53] cpus: Move CPU code from exec.c to cpus-common.c Paolo Bonzini
2020-07-06 16:41 ` [PULL 40/53] pc: fix leak in pc_system_flash_cleanup_unused Paolo Bonzini
2020-07-06 16:41 ` [PULL 41/53] softmmu: move softmmu only files from root Paolo Bonzini
2020-07-06 16:41 ` [PULL 42/53] cpu-throttle: new module, extracted from cpus.c Paolo Bonzini
2020-07-06 16:41 ` [PULL 43/53] cpu-timers, icount: new modules Paolo Bonzini
2020-07-06 16:41 ` [PULL 44/53] softmmu/vl: Remove the check for colons in -accel parameters Paolo Bonzini
2020-07-06 16:41 ` [PULL 45/53] accel/kvm: Let kvm_check_extension use global KVM state Paolo Bonzini
2020-07-06 16:41 ` [PULL 46/53] accel/kvm: Simplify kvm_check_extension() Paolo Bonzini
2020-07-06 16:41 ` [PULL 47/53] accel/kvm: Simplify kvm_check_extension_list() Paolo Bonzini
2020-07-06 16:41 ` [PULL 48/53] target/i386/kvm: Simplify get_para_features() Paolo Bonzini
2020-07-06 16:41 ` [PULL 49/53] target/i386/kvm: Simplify kvm_get_mce_cap_supported() Paolo Bonzini
2020-07-06 16:41 ` [PULL 50/53] target/i386/kvm: Simplify kvm_get_supported_[feature]_msrs() Paolo Bonzini
2020-07-06 16:41 ` [PULL 51/53] target/i386: Add SERIALIZE cpu feature Paolo Bonzini
2020-07-06 16:41 ` [PULL 52/53] target/i386: Enable TSX Suspend Load Address Tracking feature Paolo Bonzini
2020-07-06 16:41 ` [PULL 53/53] scripts: improve message when TAP based tests fail Paolo Bonzini
2020-07-06 17:19 ` [PULL 00/53] Misc patches for QEMU 5.1 soft freeze no-reply
2020-07-07 18:37 ` Peter Maydell
2020-07-07 18:42 ` Peter Maydell
2020-07-07 18:48 ` Paolo Bonzini
2020-07-08 8:25 ` Philippe Mathieu-Daudé
2020-07-08 16:13 ` Claudio Fontana
2020-07-08 16:16 ` Paolo Bonzini
2020-07-08 16:45 ` Claudio Fontana
2020-07-08 16:55 ` Paolo Bonzini
2020-07-08 17:03 ` Claudio Fontana
2020-07-08 18:25 ` Claudio Fontana
2020-07-08 18:34 ` Claudio Fontana
2020-07-08 18:41 ` Paolo Bonzini
2020-07-09 6:59 ` Claudio Fontana
2020-07-09 9:57 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200706164155.24696-32-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).