From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, mreitz@redhat.com
Subject: Re: [PATCH for-5.1] file-posix: Mitigate file fragmentation with extent size hints
Date: Tue, 7 Jul 2020 18:17:41 +0200 [thread overview]
Message-ID: <20200707161741.GG7002@linux.fritz.box> (raw)
In-Reply-To: <20200707142329.48303-1-kwolf@redhat.com>
Am 07.07.2020 um 16:23 hat Kevin Wolf geschrieben:
> Espeically when O_DIRECT is used with image files so that the page cache
> indirection can't cause a merge of allocating requests, the file will
> fragment on the file system layer, with a potentially very small
> fragment size (this depends on the requests the guest sent).
>
> On Linux, fragmentation can be reduced by setting an extent size hint
> when creating the file (at least on XFS, it can't be set any more after
> the first extent has been allocated), basically giving raw files a
> "cluster size" for allocation.
>
> This adds an create option to set the extent size hint, and changes the
> default from not setting a hint to setting it to 1 MB. The main reason
> why qcow2 defaults to smaller cluster sizes is that COW becomes more
> expensive, which is not an issue with raw files, so we can choose a
> larger file. The tradeoff here is only potentially wasted disk space.
>
> For qcow2 (or other image formats) over file-posix, the advantage should
> even be greater because they grow sequentially without leaving holes, so
> there won't be wasted space. Setting even larger extent size hints for
> such images may make sense. This can be done with the new option, but
> let's keep the default conservative for now.
>
> The effect is very visible with a test that intentionally creates a
> badly fragmented file with qemu-img bench (the time difference while
> creating the file is already remarkable) and then looks at the number of
> extents and the take a simple "qemu-img map" takes.
>
> Without an extent size hint:
>
> $ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
> Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
> $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
> Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
> Run completed in 25.848 seconds.
> $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
> Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
> Run completed in 19.616 seconds.
> $ filefrag ~/tmp/test.raw
> /home/kwolf/tmp/test.raw: 2000000 extents found
> $ time ./qemu-img map ~/tmp/test.raw
> Offset Length Mapped to File
> 0 0x1e8480000 0 /home/kwolf/tmp/test.raw
>
> real 0m1,279s
> user 0m0,043s
> sys 0m1,226s
>
> With the new default extent size hint of 1 MB:
>
> $ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
> Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
> $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
> Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
> Run completed in 11.833 seconds.
> $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
> Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
> Run completed in 10.155 seconds.
> $ filefrag ~/tmp/test.raw
> /home/kwolf/tmp/test.raw: 178 extents found
> $ time ./qemu-img map ~/tmp/test.raw
> Offset Length Mapped to File
> 0 0x1e8480000 0 /home/kwolf/tmp/test.raw
>
> real 0m0,061s
> user 0m0,040s
> sys 0m0,014s
>
> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I also need to squash in a few trivial qemu-iotests updates, for which I
won't send a v2:
diff --git a/tests/qemu-iotests/082.out b/tests/qemu-iotests/082.out
index 1b0a75c8f9..0d7c5e8342 100644
--- a/tests/qemu-iotests/082.out
+++ b/tests/qemu-iotests/082.out
@@ -62,6 +62,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -86,6 +87,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -110,6 +112,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -134,6 +137,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -158,6 +162,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -182,6 +187,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -206,6 +212,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -230,6 +237,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -353,6 +361,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -377,6 +386,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -401,6 +411,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -425,6 +436,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -449,6 +461,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -473,6 +486,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -497,6 +511,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
@@ -521,6 +536,7 @@ Supported options:
encrypt.ivgen-hash-alg=<str> - Name of IV generator hash algorithm
encrypt.key-secret=<str> - ID of secret providing qcow AES key or LUKS passphrase
encryption=<bool (on/off)> - Encrypt the image with format 'aes'. (Deprecated in favor of encrypt.format=aes)
+ extent_size_hint=<size> - Extent size hint for the image file, 0 to disable
lazy_refcounts=<bool (on/off)> - Postpone refcount updates
nocow=<bool (on/off)> - Turn off copy-on-write (valid only on btrfs)
preallocation=<str> - Preallocation mode (allowed values: off, metadata, falloc, full)
diff --git a/tests/qemu-iotests/243 b/tests/qemu-iotests/243
index a61852f6d9..17388a4644 100755
--- a/tests/qemu-iotests/243
+++ b/tests/qemu-iotests/243
@@ -51,7 +51,7 @@ for mode in off metadata falloc full; do
echo "=== preallocation=$mode ==="
echo
- _make_test_img -o "preallocation=$mode" 64M
+ _make_test_img -o "preallocation=$mode,extent_size_hint=0" 64M
printf "File size: "
du -b $TEST_IMG | cut -f1
@@ -68,7 +68,8 @@ for mode in off metadata falloc full; do
echo "=== External data file: preallocation=$mode ==="
echo
- _make_test_img -o "data_file=$TEST_IMG.data,preallocation=$mode" 64M
+ _make_test_img \
+ -o "data_file=$TEST_IMG.data,preallocation=$mode,extent_size_hint=0" 64M
echo -n "qcow2 file size: "
du -b $TEST_IMG | cut -f1
@@ -79,7 +80,7 @@ for mode in off metadata falloc full; do
echo -n "qcow2 disk usage: "
[ $(du -B1 $TEST_IMG | cut -f1) -lt 1048576 ] && echo "low" || echo "high"
echo -n "data disk usage: "
- [ $(du -B1 $TEST_IMG.data | cut -f1) -lt 1048576 ] && echo "low" || echo "high"
+ [ $(du -B1 $TEST_IMG.data | cut -f1) -lt 2097152 ] && echo "low" || echo "high"
done
diff --git a/tests/qemu-iotests/243.out b/tests/qemu-iotests/243.out
index dcb33fac32..8bd3d79d66 100644
--- a/tests/qemu-iotests/243.out
+++ b/tests/qemu-iotests/243.out
@@ -2,31 +2,31 @@ QA output created by 243
=== preallocation=off ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=off
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=off extent_size_hint=0
File size: 196616
Disk usage: low
=== preallocation=metadata ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=metadata extent_size_hint=0
File size: 67436544
Disk usage: low
=== preallocation=falloc ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=falloc
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=falloc extent_size_hint=0
File size: 67436544
Disk usage: high
=== preallocation=full ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=full
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=full extent_size_hint=0
File size: 67436544
Disk usage: high
=== External data file: preallocation=off ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=off
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=off extent_size_hint=0
qcow2 file size: 196616
data file size: 67108864
qcow2 disk usage: low
@@ -34,7 +34,7 @@ data disk usage: low
=== External data file: preallocation=metadata ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=metadata extent_size_hint=0
qcow2 file size: 327680
data file size: 67108864
qcow2 disk usage: low
@@ -42,7 +42,7 @@ data disk usage: low
=== External data file: preallocation=falloc ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=falloc
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=falloc extent_size_hint=0
qcow2 file size: 327680
data file size: 67108864
qcow2 disk usage: low
@@ -50,7 +50,7 @@ data disk usage: high
=== External data file: preallocation=full ===
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=full
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=full extent_size_hint=0
qcow2 file size: 327680
data file size: 67108864
qcow2 disk usage: low
next prev parent reply other threads:[~2020-07-07 16:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-07 14:23 [PATCH for-5.1] file-posix: Mitigate file fragmentation with extent size hints Kevin Wolf
2020-07-07 14:47 ` Eric Blake
2020-07-07 16:17 ` Kevin Wolf [this message]
2020-07-10 16:12 ` Max Reitz
2020-07-13 9:08 ` Max Reitz
2020-07-13 13:12 ` Kevin Wolf
2020-07-13 13:45 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200707161741.GG7002@linux.fritz.box \
--to=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).