qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Sagar Karandikar" <sagark@eecs.berkeley.edu>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Jason Wang" <jasowang@redhat.com>,
	"Alistair Francis" <Alistair.Francis@wdc.com>,
	"Gerd Hoffmann" <kraxel@redhat.com>,
	"Li Zhijian" <lizhijian@cn.fujitsu.com>,
	qemu-block@nongnu.org, "Juan Quintela" <quintela@redhat.com>,
	"David Hildenbrand" <david@redhat.com>,
	"Aleksandar Markovic" <aleksandar.qemu.devel@gmail.com>,
	"Marc-André Lureau" <marcandre.lureau@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	"Cameron Esfahani" <dirty@apple.com>,
	"Alex Williamson" <alex.williamson@redhat.com>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"David Gibson" <david@gibson.dropbear.id.au>,
	"Kevin Wolf" <kwolf@redhat.com>,
	qemu-riscv@nongnu.org,
	"Bastian Koppelmann" <kbastian@mail.uni-paderborn.de>,
	"Roman Bolshakov" <r.bolshakov@yadro.com>,
	"Max Reitz" <mreitz@redhat.com>,
	"Zhang Chen" <chen.zhang@intel.com>,
	qemu-ppc@nongnu.org, "Paolo Bonzini" <pbonzini@redhat.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Stefan Berger" <stefanb@linux.ibm.com>
Subject: [PULL 4/9] net/colo: Match is-enabled probe to tracepoint
Date: Thu, 13 Aug 2020 06:22:52 +0100	[thread overview]
Message-ID: <20200813052257.226142-5-stefanha@redhat.com> (raw)
In-Reply-To: <20200813052257.226142-1-stefanha@redhat.com>

From: Roman Bolshakov <r.bolshakov@yadro.com>

Build of QEMU with dtrace fails on macOS:

  LINK    x86_64-softmmu/qemu-system-x86_64
error: probe colo_compare_miscompare doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64

The reason of the error is explained by Adam Leventhal [1]:

  Note that is-enabled probes don't have the stability magic so I'm not
  sure how things would work if only is-enabled probes were used.

net/colo code uses is-enabled probes to determine if other probes should
be used but colo_compare_miscompare itself is not used explicitly.
Linker doesn't include the symbol and build fails.

The issue can be resolved if is-enabled probe matches the actual trace
point that is used inside the test. Packet dump toggle is replaced with
a compile-time conditional definition.

1. http://markmail.org/message/6grq2ygr5nwdwsnb

Fixes: f4b618360e ("colo-compare: add TCP, UDP, ICMP packet comparison")
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-id: 20200717093517.73397-5-r.bolshakov@yadro.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 net/colo-compare.c    | 42 ++++++++++++++++++++++--------------------
 net/filter-rewriter.c | 10 ++++++++--
 net/trace-events      |  2 --
 3 files changed, 30 insertions(+), 24 deletions(-)

diff --git a/net/colo-compare.c b/net/colo-compare.c
index 2c20de1537..0b3215dee0 100644
--- a/net/colo-compare.c
+++ b/net/colo-compare.c
@@ -54,6 +54,8 @@ static NotifierList colo_compare_notifiers =
 #define REGULAR_PACKET_CHECK_MS 3000
 #define DEFAULT_TIME_OUT_MS 3000
 
+/* #define DEBUG_COLO_PACKETS */
+
 static QemuMutex colo_compare_mutex;
 static bool colo_compare_active;
 static QemuMutex event_mtx;
@@ -328,7 +330,7 @@ static int colo_compare_packet_payload(Packet *ppkt,
                                        uint16_t len)
 
 {
-    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
         char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20], sec_ip_dst[20];
 
         strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
@@ -493,12 +495,12 @@ sec:
         g_queue_push_head(&conn->primary_list, ppkt);
         g_queue_push_head(&conn->secondary_list, spkt);
 
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
-            qemu_hexdump((char *)ppkt->data, stderr,
-                        "colo-compare ppkt", ppkt->size);
-            qemu_hexdump((char *)spkt->data, stderr,
-                        "colo-compare spkt", spkt->size);
-        }
+#ifdef DEBUG_COLO_PACKETS
+        qemu_hexdump((char *)ppkt->data, stderr,
+                     "colo-compare ppkt", ppkt->size);
+        qemu_hexdump((char *)spkt->data, stderr,
+                     "colo-compare spkt", spkt->size);
+#endif
 
         colo_compare_inconsistency_notify(s);
     }
@@ -534,12 +536,12 @@ static int colo_packet_compare_udp(Packet *spkt, Packet *ppkt)
                                     ppkt->size - offset)) {
         trace_colo_compare_udp_miscompare("primary pkt size", ppkt->size);
         trace_colo_compare_udp_miscompare("Secondary pkt size", spkt->size);
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
-            qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
-                         ppkt->size);
-            qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
-                         spkt->size);
-        }
+#ifdef DEBUG_COLO_PACKETS
+        qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
+                     ppkt->size);
+        qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
+                     spkt->size);
+#endif
         return -1;
     } else {
         return 0;
@@ -577,12 +579,12 @@ static int colo_packet_compare_icmp(Packet *spkt, Packet *ppkt)
                                            ppkt->size);
         trace_colo_compare_icmp_miscompare("Secondary pkt size",
                                            spkt->size);
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
-            qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
-                         ppkt->size);
-            qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
-                         spkt->size);
-        }
+#ifdef DEBUG_COLO_PACKETS
+        qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
+                     ppkt->size);
+        qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
+                     spkt->size);
+#endif
         return -1;
     } else {
         return 0;
@@ -598,7 +600,7 @@ static int colo_packet_compare_other(Packet *spkt, Packet *ppkt)
     uint16_t offset = ppkt->vnet_hdr_len;
 
     trace_colo_compare_main("compare other");
-    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
         char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20], sec_ip_dst[20];
 
         strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
diff --git a/net/filter-rewriter.c b/net/filter-rewriter.c
index 1aaad101b6..576b019d09 100644
--- a/net/filter-rewriter.c
+++ b/net/filter-rewriter.c
@@ -76,11 +76,14 @@ static int handle_primary_tcp_pkt(RewriterState *rf,
     struct tcp_hdr *tcp_pkt;
 
     tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
-    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
+    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO)) {
         trace_colo_filter_rewriter_pkt_info(__func__,
                     inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
                     ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
                     tcp_pkt->th_flags);
+    }
+    if (trace_event_get_state_backends(
+          TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
         trace_colo_filter_rewriter_conn_offset(conn->offset);
     }
 
@@ -180,11 +183,14 @@ static int handle_secondary_tcp_pkt(RewriterState *rf,
 
     tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
 
-    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
+    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO)) {
         trace_colo_filter_rewriter_pkt_info(__func__,
                     inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
                     ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
                     tcp_pkt->th_flags);
+    }
+    if (trace_event_get_state_backends(
+          TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
         trace_colo_filter_rewriter_conn_offset(conn->offset);
     }
 
diff --git a/net/trace-events b/net/trace-events
index fa49c71533..bfaff7891d 100644
--- a/net/trace-events
+++ b/net/trace-events
@@ -17,10 +17,8 @@ colo_compare_udp_miscompare(const char *sta, int size) ": %s = %d"
 colo_compare_icmp_miscompare(const char *sta, int size) ": %s = %d"
 colo_compare_ip_info(int psize, const char *sta, const char *stb, int ssize, const char *stc, const char *std) "ppkt size = %d, ip_src = %s, ip_dst = %s, spkt size = %d, ip_src = %s, ip_dst = %s"
 colo_old_packet_check_found(int64_t old_time) "%" PRId64
-colo_compare_miscompare(void) ""
 colo_compare_tcp_info(const char *pkt, uint32_t seq, uint32_t ack, int hdlen, int pdlen, int offset, int flags) "%s: seq/ack= %u/%u hdlen= %d pdlen= %d offset= %d flags=%d"
 
 # filter-rewriter.c
-colo_filter_rewriter_debug(void) ""
 colo_filter_rewriter_pkt_info(const char *func, const char *src, const char *dst, uint32_t seq, uint32_t ack, uint32_t flag) "%s: src/dst: %s/%s p: seq/ack=%u/%u  flags=0x%x"
 colo_filter_rewriter_conn_offset(uint32_t offset) ": offset=%u"
-- 
2.26.2


  parent reply	other threads:[~2020-08-13  7:47 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-13  5:22 [PULL 0/9] Tracing patches Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 1/9] scripts/tracetool: Fix dtrace generation for macOS Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 2/9] scripts/tracetool: Use void pointer for vcpu Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 3/9] build: Don't make object files for dtrace on macOS Stefan Hajnoczi
2020-08-13  5:22 ` Stefan Hajnoczi [this message]
2020-08-13  5:22 ` [PULL 5/9] softmmu: Add missing trace-events file Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 6/9] scripts/cleanup-trace-events: Fix for vcpu property Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 7/9] scripts/cleanup-trace-events: Emit files in alphabetical order Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 8/9] trace-events: Delete unused trace points Stefan Hajnoczi
2020-08-13  5:22 ` [PULL 9/9] trace-events: Fix attribution of trace points to source Stefan Hajnoczi
2020-08-13 10:31 ` [PULL 0/9] Tracing patches no-reply
2020-08-13 10:47 ` no-reply
2020-08-13 12:17   ` Stefan Hajnoczi
2020-08-21 16:25 ` Peter Maydell
2020-09-09 10:20   ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200813052257.226142-5-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=aleksandar.qemu.devel@gmail.com \
    --cc=aleksandar.rikalo@syrmia.com \
    --cc=alex.williamson@redhat.com \
    --cc=aurelien@aurel32.net \
    --cc=chen.zhang@intel.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=david@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=dirty@apple.com \
    --cc=jasowang@redhat.com \
    --cc=kbastian@mail.uni-paderborn.de \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=mst@redhat.com \
    --cc=palmer@dabbelt.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=r.bolshakov@yadro.com \
    --cc=sagark@eecs.berkeley.edu \
    --cc=stefanb@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).