qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>
Subject: [PULL 22/34] qcow2: Add subcluster support to zero_in_l2_slice()
Date: Tue, 25 Aug 2020 10:32:59 +0200	[thread overview]
Message-ID: <20200825083311.1098442-23-mreitz@redhat.com> (raw)
In-Reply-To: <20200825083311.1098442-1-mreitz@redhat.com>

From: Alberto Garcia <berto@igalia.com>

The QCOW_OFLAG_ZERO bit that indicates that a cluster reads as
zeroes is only used in standard L2 entries. Extended L2 entries use
individual 'all zeroes' bits for each subcluster.

This must be taken into account when updating the L2 entry and also
when deciding that an existing entry does not need to be updated.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <b61d61606d8c9b367bd641ab37351ddb9172799a.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/qcow2-cluster.c | 38 ++++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 08ecb4ca0c..5afcd72f5a 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1957,7 +1957,6 @@ static int zero_in_l2_slice(BlockDriverState *bs, uint64_t offset,
     int l2_index;
     int ret;
     int i;
-    bool unmap = !!(flags & BDRV_REQ_MAY_UNMAP);
 
     ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
     if (ret < 0) {
@@ -1969,28 +1968,31 @@ static int zero_in_l2_slice(BlockDriverState *bs, uint64_t offset,
     assert(nb_clusters <= INT_MAX);
 
     for (i = 0; i < nb_clusters; i++) {
-        uint64_t old_offset;
-        QCow2ClusterType cluster_type;
-
-        old_offset = get_l2_entry(s, l2_slice, l2_index + i);
+        uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i);
+        uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i);
+        QCow2ClusterType type = qcow2_get_cluster_type(bs, old_l2_entry);
+        bool unmap = (type == QCOW2_CLUSTER_COMPRESSED) ||
+            ((flags & BDRV_REQ_MAY_UNMAP) && qcow2_cluster_is_allocated(type));
+        uint64_t new_l2_entry = unmap ? 0 : old_l2_entry;
+        uint64_t new_l2_bitmap = old_l2_bitmap;
+
+        if (has_subclusters(s)) {
+            new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES;
+        } else {
+            new_l2_entry |= QCOW_OFLAG_ZERO;
+        }
 
-        /*
-         * Minimize L2 changes if the cluster already reads back as
-         * zeroes with correct allocation.
-         */
-        cluster_type = qcow2_get_cluster_type(bs, old_offset);
-        if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN ||
-            (cluster_type == QCOW2_CLUSTER_ZERO_ALLOC && !unmap)) {
+        if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) {
             continue;
         }
 
         qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
-        if (cluster_type == QCOW2_CLUSTER_COMPRESSED || unmap) {
-            set_l2_entry(s, l2_slice, l2_index + i, QCOW_OFLAG_ZERO);
-            qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
-        } else {
-            uint64_t entry = get_l2_entry(s, l2_slice, l2_index + i);
-            set_l2_entry(s, l2_slice, l2_index + i, entry | QCOW_OFLAG_ZERO);
+        if (unmap) {
+            qcow2_free_any_clusters(bs, old_l2_entry, 1, QCOW2_DISCARD_REQUEST);
+        }
+        set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry);
+        if (has_subclusters(s)) {
+            set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap);
         }
     }
 
-- 
2.26.2



  parent reply	other threads:[~2020-08-25  8:43 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-25  8:32 [PULL 00/34] Block patches Max Reitz
2020-08-25  8:32 ` [PULL 01/34] qcow2: Make Qcow2AioTask store the full host offset Max Reitz
2020-08-25  8:32 ` [PULL 02/34] qcow2: Convert qcow2_get_cluster_offset() into qcow2_get_host_offset() Max Reitz
2020-08-25  8:32 ` [PULL 03/34] qcow2: Add calculate_l2_meta() Max Reitz
2020-08-25  8:32 ` [PULL 04/34] qcow2: Split cluster_needs_cow() out of count_cow_clusters() Max Reitz
2020-08-25  8:32 ` [PULL 05/34] qcow2: Process QCOW2_CLUSTER_ZERO_ALLOC clusters in handle_copied() Max Reitz
2020-08-25  8:32 ` [PULL 06/34] qcow2: Add get_l2_entry() and set_l2_entry() Max Reitz
2020-08-25  8:32 ` [PULL 07/34] qcow2: Document the Extended L2 Entries feature Max Reitz
2020-08-25  8:32 ` [PULL 08/34] qcow2: Add dummy has_subclusters() function Max Reitz
2020-08-25  8:32 ` [PULL 09/34] qcow2: Add subcluster-related fields to BDRVQcow2State Max Reitz
2020-08-25  8:32 ` [PULL 10/34] qcow2: Add offset_to_sc_index() Max Reitz
2020-08-25  8:32 ` [PULL 11/34] qcow2: Add offset_into_subcluster() and size_to_subclusters() Max Reitz
2020-08-25  8:32 ` [PULL 12/34] qcow2: Add l2_entry_size() Max Reitz
2020-08-25  8:32 ` [PULL 13/34] qcow2: Update get/set_l2_entry() and add get/set_l2_bitmap() Max Reitz
2020-08-25  8:32 ` [PULL 14/34] qcow2: Add QCow2SubclusterType and qcow2_get_subcluster_type() Max Reitz
2020-08-25  8:32 ` [PULL 15/34] qcow2: Add qcow2_get_subcluster_range_type() Max Reitz
2020-08-25  8:32 ` [PULL 16/34] qcow2: Add qcow2_cluster_is_allocated() Max Reitz
2020-08-25  8:32 ` [PULL 17/34] qcow2: Add cluster type parameter to qcow2_get_host_offset() Max Reitz
2020-08-25  8:32 ` [PULL 18/34] qcow2: Replace QCOW2_CLUSTER_* with QCOW2_SUBCLUSTER_* Max Reitz
2020-08-25  8:32 ` [PULL 19/34] qcow2: Handle QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC Max Reitz
2020-08-25  8:32 ` [PULL 20/34] qcow2: Add subcluster support to calculate_l2_meta() Max Reitz
2020-08-25  8:32 ` [PULL 21/34] qcow2: Add subcluster support to qcow2_get_host_offset() Max Reitz
2020-08-25  8:32 ` Max Reitz [this message]
2020-08-25  8:33 ` [PULL 23/34] qcow2: Add subcluster support to discard_in_l2_slice() Max Reitz
2020-08-25  8:33 ` [PULL 24/34] qcow2: Add subcluster support to check_refcounts_l2() Max Reitz
2020-08-25  8:33 ` [PULL 25/34] qcow2: Update L2 bitmap in qcow2_alloc_cluster_link_l2() Max Reitz
2020-08-25  8:33 ` [PULL 26/34] qcow2: Clear the L2 bitmap when allocating a compressed cluster Max Reitz
2020-08-25  8:33 ` [PULL 27/34] qcow2: Add subcluster support to handle_alloc_space() Max Reitz
2020-08-25  8:33 ` [PULL 28/34] qcow2: Add subcluster support to qcow2_co_pwrite_zeroes() Max Reitz
2020-08-25  8:33 ` [PULL 29/34] qcow2: Add subcluster support to qcow2_measure() Max Reitz
2020-08-25  8:33 ` [PULL 30/34] qcow2: Add prealloc field to QCowL2Meta Max Reitz
2020-08-25  8:33 ` [PULL 31/34] qcow2: Add the 'extended_l2' option and the QCOW2_INCOMPAT_EXTL2 bit Max Reitz
2020-08-25  8:33 ` [PULL 32/34] qcow2: Allow preallocation and backing files if extended_l2 is set Max Reitz
2020-08-25  8:33 ` [PULL 33/34] qcow2: Assert that expand_zero_clusters_in_l1() does not support subclusters Max Reitz
2020-08-25  8:33 ` [PULL 34/34] iotests: Add tests for qcow2 images with extended L2 entries Max Reitz
2020-08-25 14:01 ` [PULL 00/34] Block patches Peter Maydell
2020-08-25 14:22   ` Alberto Garcia
2020-08-25 15:13     ` Max Reitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200825083311.1098442-23-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).