From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH 17/20] hw/rx/rx62n: Add Ethernet support.
Date: Thu, 27 Aug 2020 21:38:56 +0900 [thread overview]
Message-ID: <20200827123859.81793-18-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20200827123859.81793-1-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
include/hw/rx/rx62n.h | 3 +++
hw/rx/rx62n.c | 26 ++++++++++++++++++++++++++
hw/rx/Kconfig | 3 ++-
3 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/include/hw/rx/rx62n.h b/include/hw/rx/rx62n.h
index 170c8cb6fc..4f11ca3fd9 100644
--- a/include/hw/rx/rx62n.h
+++ b/include/hw/rx/rx62n.h
@@ -30,6 +30,7 @@
#include "hw/timer/renesas_timer.h"
#include "hw/timer/renesas_mtu.h"
#include "hw/char/renesas_sci.h"
+#include "hw/net/renesas_eth.h"
#include "hw/rx/rx62n-cpg.h"
#include "qemu/units.h"
@@ -74,6 +75,8 @@ typedef struct RX62NState {
RenesasCMTState cmt[RX62N_NR_CMT];
RenesasMTU2State mtu[RX62N_NR_MTU];
RSCIAState sci[RX62N_NR_SCI];
+ RenesasEthState ether;
+ MDIOState *mdio;
RX62NCPGState cpg;
MemoryRegion *sysmem;
diff --git a/hw/rx/rx62n.c b/hw/rx/rx62n.c
index 344be846bc..8b41cdf90c 100644
--- a/hw/rx/rx62n.c
+++ b/hw/rx/rx62n.c
@@ -28,6 +28,7 @@
#include "hw/loader.h"
#include "hw/sysbus.h"
#include "hw/qdev-properties.h"
+#include "hw/net/mdio.h"
#include "sysemu/sysemu.h"
#include "sysemu/qtest.h"
#include "cpu.h"
@@ -48,6 +49,8 @@
#define RX62N_CMT_BASE 0x00088000
#define RX62N_MTU_BASE 0x00088600
#define RX62N_SCI_BASE 0x00088240
+#define RX62N_EDMAC_BASE 0x000c0000
+#define RX62N_ETHER_BASE 0x000c0100
#define RX62N_CPG_BASE 0x00080010
/*
@@ -58,6 +61,7 @@
#define RX62N_CMT_IRQ 28
#define RX62N_MTU_IRQ 114
#define RX62N_SCI_IRQ 214
+#define RX62N_EDMAC_IRQ 32
/*
* IRQ -> IPR mapping table
@@ -236,6 +240,25 @@ static void register_sci(RX62NState *s, int unit)
qdev_get_clock_out(DEVICE(&s->cpg), ckname));
}
+static void register_eth(RX62NState *s, NICInfo *nd)
+{
+ SysBusDevice *etherc;
+
+ qemu_check_nic_model(nd, TYPE_RENESAS_ETH);
+ object_initialize_child(OBJECT(s), "ether",
+ &s->ether, TYPE_RENESAS_ETH);
+ etherc = SYS_BUS_DEVICE(&s->ether);
+ qdev_set_nic_properties(DEVICE(etherc), nd);
+ object_property_set_link(OBJECT(etherc), "mdio",
+ OBJECT(s->mdio), &error_abort);
+ sysbus_realize(etherc, &error_abort);
+ sysbus_connect_irq(etherc, 0, s->irq[RX62N_EDMAC_IRQ]);
+ sysbus_mmio_map(etherc, 0, RX62N_ETHER_BASE);
+ sysbus_mmio_map(etherc, 1, RX62N_EDMAC_BASE);
+ qdev_connect_clock_in(DEVICE(etherc), "ick",
+ qdev_get_clock_out(DEVICE(&s->cpg), "ick_edmac"));
+}
+
static void register_cpg(RX62NState *s)
{
SysBusDevice *cpg;
@@ -277,6 +300,7 @@ static void rx62n_realize(DeviceState *dev, Error **errp)
register_mtu(s, 0);
register_mtu(s, 1);
register_sci(s, 0);
+ register_eth(s, nd_table);
sysbus_realize(SYS_BUS_DEVICE(&s->cpg), &error_abort);
}
@@ -284,6 +308,8 @@ static Property rx62n_properties[] = {
DEFINE_PROP_LINK("main-bus", RX62NState, sysmem, TYPE_MEMORY_REGION,
MemoryRegion *),
DEFINE_PROP_UINT32("xtal-frequency-hz", RX62NState, xtal_freq_hz, 0),
+ DEFINE_PROP_LINK("mdiodev", RX62NState, mdio, TYPE_ETHER_MDIO_BB,
+ MDIOState *),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/rx/Kconfig b/hw/rx/Kconfig
index 887a5782bb..f20ea63fd9 100644
--- a/hw/rx/Kconfig
+++ b/hw/rx/Kconfig
@@ -3,8 +3,9 @@ config RX62N_MCU
select RX_ICU
select RENESAS_TMR8
select RENESAS_TIMER
- select RENESAS_SCI
select RENESAS_MTU
+ select RENESAS_SCI
+ select RENESAS_ETH
config RX_GDBSIM
bool
--
2.20.1
next prev parent reply other threads:[~2020-08-27 12:43 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-27 12:38 [PATCH 00/20] RX target update Yoshinori Sato
2020-08-27 12:38 ` [PATCH 01/20] loader.c: Add support Motrola S-record format Yoshinori Sato
2020-09-08 20:44 ` Philippe Mathieu-Daudé
2020-10-25 0:43 ` Philippe Mathieu-Daudé
2020-10-27 21:05 ` Alistair Francis
2020-08-27 12:38 ` [PATCH 02/20] include/elf.h: Add EM_RX Yoshinori Sato
2020-08-27 12:38 ` [PATCH 03/20] hw/rx: Firmware and kernel loader Yoshinori Sato
2020-09-08 20:47 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 04/20] hw/rx: New firmware loader Yoshinori Sato
2020-08-27 12:38 ` [PATCH 05/20] hw/rx: Add RX62N Clock generator Yoshinori Sato
2020-09-08 21:11 ` Philippe Mathieu-Daudé
2020-10-24 21:56 ` Philippe Mathieu-Daudé
2020-10-24 21:58 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 06/20] hw/timer: Renesas 8bit timer emulation Yoshinori Sato
2020-10-24 21:27 ` Philippe Mathieu-Daudé
2020-10-24 21:29 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 07/20] hw/rx: RX62N convert new 8bit timer Yoshinori Sato
2020-08-27 12:38 ` [PATCH 08/20] hw/timer: Renesas TMU/CMT module Yoshinori Sato
2020-10-24 22:47 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 09/20] hw/timer: Remove renesas_cmt Yoshinori Sato
2020-08-27 12:38 ` [PATCH 10/20] hw/rx: Convert to renesas_timer Yoshinori Sato
2020-08-27 12:38 ` [PATCH 11/20] hw/char: Renesas SCI module Yoshinori Sato
2020-10-24 21:40 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 12/20] hw/rx/rx62n: Use New " Yoshinori Sato
2020-10-25 0:33 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 13/20] hw/timer: Add Renesas MTU2 Yoshinori Sato
2020-08-27 12:38 ` [PATCH 14/20] hw/rx/rx62n: RX62N Add MTU module Yoshinori Sato
2020-09-08 21:12 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 15/20] hw/net: Add generic Bit-bang MDIO PHY Yoshinori Sato
2020-08-27 12:38 ` [PATCH 16/20] hw/net: Add Renesas On-chip Ethernet MAC Yoshinori Sato
2020-10-24 21:37 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` Yoshinori Sato [this message]
2020-08-27 12:38 ` [PATCH 18/20] hw/rx: Add Tokudenkairo TKDN-RX62N-BRD Yoshinori Sato
2020-09-08 21:18 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 19/20] hw/rx: Add CQ-FRK-RX62N target Yoshinori Sato
2020-09-08 21:20 ` Philippe Mathieu-Daudé
2020-08-27 12:38 ` [PATCH 20/20] MAINTAINERS: Update RX entry Yoshinori Sato
2020-09-08 21:21 ` Philippe Mathieu-Daudé
2020-08-31 20:38 ` [PATCH 00/20] RX target update Philippe Mathieu-Daudé
2020-09-10 16:06 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200827123859.81793-18-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).