From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>,
Laurent Vivier <laurent@vivier.eu>,
Filip Bozuta <Filip.Bozuta@syrmia.com>
Subject: [PULL 13/18] linux-user: Fix 'mq_timedsend()' and 'mq_timedreceive()'
Date: Thu, 27 Aug 2020 21:20:13 +0200 [thread overview]
Message-ID: <20200827192018.2442099-14-laurent@vivier.eu> (raw)
In-Reply-To: <20200827192018.2442099-1-laurent@vivier.eu>
From: Filip Bozuta <Filip.Bozuta@syrmia.com>
Implementations of syscalls 'mq_timedsend()' and 'mq_timedreceive()'
in 'syscall.c' use functions 'target_to_host_timespec()' and
'host_to_target_timespec()' to transfer the value of 'struct timespec'
between target and host. However, the implementations don't check whether
this conversion succeeds and thus can cause an unaproppriate error instead
of the 'EFAULT (Bad address)' which is supposed to be set if the conversion
from target to host fails. This was confirmed with the modified LTP
test suite where test cases with a bad adress for 'timespec' were
added. This modified test suite can be found at:
https://github.com/bozutaf/ltp
Without the changes from this patch the bad adress testcase for 'mq_timedsend()'
succeds unexpectedly, while the test returns errno 'ETIMEOUT' for
'mq_timedreceive()':
mq_timedsend01.c:190: FAIL: mq_timedsend() returned 0, expected -1: SUCCESS (0)
mq_timedreceive01.c:178: FAIL: mq_timedreceive() failed unexpectedly,
expected EFAULT: ETIMEDOUT (110)
After the changes from this patch, testcases for both syscalls fail with EFAULT
as expected, which is the same test result that is received with native execution:
mq_timedsend01.c:187: PASS: mq_timedsend() failed expectedly: EFAULT (14)
mq_timedreceive01.c:180: PASS: mq_timedreceive() failed expectedly: EFAULT (14)
(Patch with this new test case will be sent to LTP mailing list soon)
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200824193752.67950-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
linux-user/syscall.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 78e404c23cad..fd13e72305de 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -12043,9 +12043,13 @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1,
p = lock_user (VERIFY_READ, arg2, arg3, 1);
if (arg5 != 0) {
- target_to_host_timespec(&ts, arg5);
+ if (target_to_host_timespec(&ts, arg5)) {
+ return -TARGET_EFAULT;
+ }
ret = get_errno(safe_mq_timedsend(arg1, p, arg3, arg4, &ts));
- host_to_target_timespec(arg5, &ts);
+ if (!is_error(ret) && host_to_target_timespec(arg5, &ts)) {
+ return -TARGET_EFAULT;
+ }
} else {
ret = get_errno(safe_mq_timedsend(arg1, p, arg3, arg4, NULL));
}
@@ -12062,10 +12066,14 @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1,
p = lock_user (VERIFY_READ, arg2, arg3, 1);
if (arg5 != 0) {
- target_to_host_timespec(&ts, arg5);
+ if (target_to_host_timespec(&ts, arg5)) {
+ return -TARGET_EFAULT;
+ }
ret = get_errno(safe_mq_timedreceive(arg1, p, arg3,
&prio, &ts));
- host_to_target_timespec(arg5, &ts);
+ if (!is_error(ret) && host_to_target_timespec(arg5, &ts)) {
+ return -TARGET_EFAULT;
+ }
} else {
ret = get_errno(safe_mq_timedreceive(arg1, p, arg3,
&prio, NULL));
--
2.26.2
next prev parent reply other threads:[~2020-08-27 19:28 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-27 19:20 [PULL 00/18] Linux user for 5.2 patches Laurent Vivier
2020-08-27 19:20 ` [PULL 01/18] linux-user: Fix 'semop()' and 'semtimedop()' implementation Laurent Vivier
2020-08-27 19:20 ` [PULL 02/18] linux-user: Fix 'clock_nanosleep()' implementation Laurent Vivier
2020-08-27 19:20 ` [PULL 03/18] linux-user: syscall: ioctls: support DRM_IOCTL_I915_GETPARAM Laurent Vivier
2020-08-27 19:20 ` [PULL 04/18] linux-user: Make cpu_env accessible in strace.c Laurent Vivier
2020-08-27 19:20 ` [PULL 05/18] linux-user: Add strace support for printing arguments of truncate()/ftruncate() and getsid() Laurent Vivier
2020-08-27 19:20 ` [PULL 06/18] linux-user: Add strace support for printing arguments of syscalls used to lock and unlock memory Laurent Vivier
2020-08-27 19:20 ` [PULL 07/18] linux-user: Add an api to print enumareted argument values with strace Laurent Vivier
2020-08-27 19:20 ` [PULL 08/18] linux-user: Add strace support for printing arguments of some clock and time functions Laurent Vivier
2020-08-27 19:20 ` [PULL 09/18] linux-user: Add generic 'termbits.h' for some archs Laurent Vivier
2020-08-27 19:20 ` [PULL 10/18] linux-user: Add missing termbits types and values definitions Laurent Vivier
2020-08-27 19:20 ` [PULL 11/18] linux-user: Add strace support for printing arguments for ioctls used for terminals and serial lines Laurent Vivier
2020-08-27 19:20 ` [PULL 12/18] linux-user: detect mismatched ELF ABI in qemu-mips[n32][el] Laurent Vivier
2020-08-27 19:20 ` Laurent Vivier [this message]
2020-08-27 19:20 ` [PULL 14/18] linux-user: fix target_to_host_timespec64() Laurent Vivier
2020-08-27 19:20 ` [PULL 15/18] linux-user: Add support for 'mq_timedsend_time64()' and 'mq_timedreceive_time64()' Laurent Vivier
2020-08-27 19:20 ` [PULL 16/18] linux-user: Add support for 'clock_nanosleep_time64()' and 'clock_adjtime64()' Laurent Vivier
2020-08-27 19:20 ` [PULL 17/18] linux-user: Add support for 'rt_sigtimedwait_time64()' and 'sched_rr_get_interval_time64()' Laurent Vivier
2020-08-27 19:20 ` [PULL 18/18] linux-user: Add support for utimensat_time64() and semtimedop_time64() Laurent Vivier
2020-08-28 12:11 ` [PULL 00/18] Linux user for 5.2 patches Peter Maydell
2020-08-28 13:36 ` Laurent Vivier
-- strict thread matches above, loose matches on Subject: below --
2020-08-28 13:37 Laurent Vivier
2020-08-28 13:37 ` [PULL 13/18] linux-user: Fix 'mq_timedsend()' and 'mq_timedreceive()' Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200827192018.2442099-14-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=Filip.Bozuta@syrmia.com \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).