From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
peter.maydell@linaro.org
Subject: [PULL 17/76] target/microblaze: Fix width of BTR
Date: Mon, 31 Aug 2020 09:05:02 -0700 [thread overview]
Message-ID: <20200831160601.833692-18-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200831160601.833692-1-richard.henderson@linaro.org>
The branch target register is only 32-bits wide. Do not use a
64-bit type to represent it. Since cpu_btr is only used during
MSR and MTR instructions, we can just as easily use an explicit
load and store, so eliminate the variable.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/microblaze/cpu.h | 2 +-
target/microblaze/translate.c | 12 +++++-------
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/target/microblaze/cpu.h b/target/microblaze/cpu.h
index 34177f9b28..72f068a5fd 100644
--- a/target/microblaze/cpu.h
+++ b/target/microblaze/cpu.h
@@ -241,7 +241,7 @@ struct CPUMBState {
uint64_t ear;
uint32_t esr;
uint32_t fsr;
- uint64_t btr;
+ uint32_t btr;
uint64_t edr;
float_status fp_status;
/* Stack protectors. Yes, it's a hw feature. */
diff --git a/target/microblaze/translate.c b/target/microblaze/translate.c
index 3fc2feda3d..a2bba0fe61 100644
--- a/target/microblaze/translate.c
+++ b/target/microblaze/translate.c
@@ -59,7 +59,6 @@ static TCGv_i32 cpu_pc;
static TCGv_i32 cpu_msr;
static TCGv_i64 cpu_ear;
static TCGv_i32 cpu_esr;
-static TCGv_i64 cpu_btr;
static TCGv_i64 cpu_edr;
static TCGv_i32 env_imm;
static TCGv_i32 env_btaken;
@@ -545,7 +544,8 @@ static void dec_msr(DisasContext *dc)
cpu_env, offsetof(CPUMBState, fsr));
break;
case SR_BTR:
- tcg_gen_extu_i32_i64(cpu_btr, cpu_R[dc->ra]);
+ tcg_gen_st_i32(cpu_R[dc->ra],
+ cpu_env, offsetof(CPUMBState, btr));
break;
case SR_EDR:
tcg_gen_extu_i32_i64(cpu_edr, cpu_R[dc->ra]);
@@ -587,7 +587,8 @@ static void dec_msr(DisasContext *dc)
cpu_env, offsetof(CPUMBState, fsr));
break;
case SR_BTR:
- tcg_gen_extrl_i64_i32(cpu_R[dc->rd], cpu_btr);
+ tcg_gen_ld_i32(cpu_R[dc->rd],
+ cpu_env, offsetof(CPUMBState, btr));
break;
case SR_EDR:
tcg_gen_extrl_i64_i32(cpu_R[dc->rd], cpu_edr);
@@ -1799,8 +1800,7 @@ void mb_cpu_dump_state(CPUState *cs, FILE *f, int flags)
qemu_fprintf(f, "IN: PC=%x %s\n",
env->pc, lookup_symbol(env->pc));
qemu_fprintf(f, "rmsr=%x resr=%x rear=%" PRIx64 " "
- "debug=%x imm=%x iflags=%x fsr=%x "
- "rbtr=%" PRIx64 "\n",
+ "debug=%x imm=%x iflags=%x fsr=%x rbtr=%x\n",
env->msr, env->esr, env->ear,
env->debug, env->imm, env->iflags, env->fsr,
env->btr);
@@ -1868,8 +1868,6 @@ void mb_tcg_init(void)
tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, ear), "rear");
cpu_esr =
tcg_global_mem_new_i32(cpu_env, offsetof(CPUMBState, esr), "resr");
- cpu_btr =
- tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, btr), "rbtr");
cpu_edr =
tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, edr), "redr");
}
--
2.25.1
next prev parent reply other threads:[~2020-08-31 16:15 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 16:04 [PULL 00/76] target/microblaze improvements Richard Henderson
2020-08-31 16:04 ` [PULL 01/76] tests/tcg: Add microblaze to arches filter Richard Henderson
2020-08-31 16:04 ` [PULL 02/76] tests/tcg: Do not require FE_TOWARDZERO Richard Henderson
2020-08-31 16:04 ` [PULL 03/76] tests/tcg: Do not require FE_* exception bits Richard Henderson
2020-08-31 16:04 ` [PULL 04/76] target/microblaze: Tidy gdbstub Richard Henderson
2020-08-31 16:04 ` [PULL 05/76] target/microblaze: Split out PC from env->sregs Richard Henderson
2020-08-31 16:04 ` [PULL 06/76] target/microblaze: Split out MSR " Richard Henderson
2020-08-31 16:04 ` [PULL 07/76] target/microblaze: Split out EAR " Richard Henderson
2020-08-31 16:04 ` [PULL 08/76] target/microblaze: Split out ESR " Richard Henderson
2020-08-31 16:04 ` [PULL 09/76] target/microblaze: Split out FSR " Richard Henderson
2020-08-31 16:04 ` [PULL 10/76] target/microblaze: Split out BTR " Richard Henderson
2020-08-31 16:04 ` [PULL 11/76] target/microblaze: Split out EDR " Richard Henderson
2020-08-31 16:04 ` [PULL 12/76] target/microblaze: Split the cpu_SR array Richard Henderson
2020-08-31 16:04 ` [PULL 13/76] target/microblaze: Fix width of PC and BTARGET Richard Henderson
2020-08-31 16:04 ` [PULL 14/76] target/microblaze: Fix width of MSR Richard Henderson
2020-08-31 16:05 ` [PULL 15/76] target/microblaze: Fix width of ESR Richard Henderson
2020-08-31 16:05 ` [PULL 16/76] target/microblaze: Fix width of FSR Richard Henderson
2020-08-31 16:05 ` Richard Henderson [this message]
2020-08-31 16:05 ` [PULL 18/76] target/microblaze: Fix width of EDR Richard Henderson
2020-08-31 16:05 ` [PULL 19/76] target/microblaze: Remove cpu_ear Richard Henderson
2020-08-31 16:05 ` [PULL 20/76] target/microblaze: Tidy raising of exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 21/76] target/microblaze: Mark raise_exception as noreturn Richard Henderson
2020-08-31 16:05 ` [PULL 22/76] target/microblaze: Remove helper_debug and env->debug Richard Henderson
2020-08-31 16:05 ` [PULL 23/76] target/microblaze: Rename env_* tcg variables to cpu_* Richard Henderson
2020-08-31 16:05 ` [PULL 24/76] target/microblaze: Tidy mb_tcg_init Richard Henderson
2020-08-31 16:05 ` [PULL 25/76] target/microblaze: Split out MSR[C] to its own variable Richard Henderson
2020-08-31 16:05 ` [PULL 26/76] target/microblaze: Use DISAS_NORETURN Richard Henderson
2020-08-31 16:05 ` [PULL 27/76] target/microblaze: Check singlestep_enabled in gen_goto_tb Richard Henderson
2020-08-31 16:05 ` [PULL 28/76] target/microblaze: Convert to DisasContextBase Richard Henderson
2020-08-31 16:05 ` [PULL 29/76] target/microblaze: Convert to translator_loop Richard Henderson
2020-08-31 16:05 ` [PULL 30/76] target/microblaze: Remove SIM_COMPAT Richard Henderson
2020-08-31 16:05 ` [PULL 31/76] target/microblaze: Remove DISAS_GNU Richard Henderson
2020-08-31 16:05 ` [PULL 32/76] target/microblaze: Remove empty D macros Richard Henderson
2020-08-31 16:05 ` [PULL 33/76] target/microblaze: Remove LOG_DIS Richard Henderson
2020-08-31 16:05 ` [PULL 34/76] target/microblaze: Ensure imm constant is always available Richard Henderson
2020-08-31 16:05 ` [PULL 35/76] target/microblaze: Add decodetree infrastructure Richard Henderson
2020-08-31 16:05 ` [PULL 36/76] target/microblaze: Convert dec_add to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 37/76] target/microblaze: Convert dec_sub " Richard Henderson
2020-08-31 16:05 ` [PULL 38/76] target/microblaze: Implement cmp and cmpu inline Richard Henderson
2020-08-31 16:05 ` [PULL 39/76] target/microblaze: Convert dec_pattern to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 40/76] target/microblaze: Convert dec_and, dec_or, dec_xor " Richard Henderson
2020-08-31 16:05 ` [PULL 41/76] target/microblaze: Convert dec_mul " Richard Henderson
2020-08-31 16:05 ` [PULL 42/76] target/microblaze: Convert dec_div " Richard Henderson
2020-08-31 16:05 ` [PULL 43/76] target/microblaze: Unwind properly when raising divide-by-zero Richard Henderson
2020-08-31 16:05 ` [PULL 44/76] target/microblaze: Convert dec_bit to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 45/76] target/microblaze: Convert dec_barrel " Richard Henderson
2020-08-31 16:05 ` [PULL 46/76] target/microblaze: Convert dec_imm " Richard Henderson
2020-08-31 16:05 ` [PULL 47/76] target/microblaze: Convert dec_fpu " Richard Henderson
2020-08-31 16:05 ` [PULL 48/76] target/microblaze: Fix cpu unwind for fpu exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 49/76] target/microblaze: Mark fpu helpers TCG_CALL_NO_WG Richard Henderson
2020-08-31 16:05 ` [PULL 50/76] target/microblaze: Replace MSR_EE_FLAG with MSR_EE Richard Henderson
2020-08-31 16:05 ` [PULL 51/76] target/microblaze: Cache mem_index in DisasContext Richard Henderson
2020-08-31 16:05 ` [PULL 52/76] target/microblaze: Fix cpu unwind for stackprot Richard Henderson
2020-08-31 16:05 ` [PULL 53/76] target/microblaze: Convert dec_load and dec_store to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 54/76] target/microblaze: Assert no overlap in flags making up tb_flags Richard Henderson
2020-08-31 16:05 ` [PULL 55/76] target/microblaze: Move bimm to BIMM_FLAG Richard Henderson
2020-08-31 16:05 ` [PULL 56/76] target/microblaze: Fix no-op mb_cpu_transaction_failed Richard Henderson
2020-08-31 16:05 ` [PULL 57/76] target/microblaze: Store "current" iflags in insn_start Richard Henderson
2020-08-31 16:05 ` [PULL 58/76] tcg: Add tcg_get_insn_start_param Richard Henderson
2020-08-31 16:05 ` [PULL 59/76] target/microblaze: Use cc->do_unaligned_access Richard Henderson
2020-08-31 16:05 ` [PULL 60/76] target/microblaze: Replace clear_imm with tb_flags_to_set Richard Henderson
2020-08-31 16:05 ` [PULL 61/76] target/microblaze: Replace delayed_branch " Richard Henderson
2020-08-31 16:05 ` [PULL 62/76] target/microblaze: Tidy mb_cpu_dump_state Richard Henderson
2020-08-31 16:05 ` [PULL 63/76] target/microblaze: Convert brk and brki to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 64/76] target/microblaze: Convert mbar " Richard Henderson
2020-08-31 16:05 ` [PULL 65/76] target/microblaze: Reorganize branching Richard Henderson
2020-08-31 16:05 ` [PULL 66/76] target/microblaze: Convert dec_br to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 67/76] target/microblaze: Convert dec_bcc " Richard Henderson
2020-08-31 16:05 ` [PULL 68/76] target/microblaze: Convert dec_rts " Richard Henderson
2020-08-31 16:05 ` [PULL 69/76] target/microblaze: Tidy do_rti, do_rtb, do_rte Richard Henderson
2020-08-31 16:05 ` [PULL 70/76] target/microblaze: Convert msrclr, msrset to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 71/76] target/microblaze: Convert dec_msr " Richard Henderson
2020-08-31 16:05 ` [PULL 72/76] target/microblaze: Convert dec_stream " Richard Henderson
2020-08-31 16:05 ` [PULL 73/76] target/microblaze: Remove last of old decoder Richard Henderson
2020-08-31 16:05 ` [PULL 74/76] target/microblaze: Remove cpu_R[0] Richard Henderson
2020-08-31 16:06 ` [PULL 75/76] target/microblaze: Add flags markup to some helpers Richard Henderson
2020-08-31 16:06 ` [PULL 76/76] target/microblaze: Reduce linux-user address space to 32-bit Richard Henderson
2020-09-01 0:21 ` [PULL 00/76] target/microblaze improvements no-reply
2020-09-01 0:32 ` no-reply
2020-09-01 12:17 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831160601.833692-18-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).