From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
peter.maydell@linaro.org,
"Edgar E . Iglesias" <edgar.iglesias@gmail.com>
Subject: [PULL 56/76] target/microblaze: Fix no-op mb_cpu_transaction_failed
Date: Mon, 31 Aug 2020 09:05:41 -0700 [thread overview]
Message-ID: <20200831160601.833692-57-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200831160601.833692-1-richard.henderson@linaro.org>
Do not call cpu_restore_state when no exception will be
delivered. This can lead to inconsistent cpu state.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reported-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/microblaze/op_helper.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/target/microblaze/op_helper.c b/target/microblaze/op_helper.c
index a99c467364..e6dcc79243 100644
--- a/target/microblaze/op_helper.c
+++ b/target/microblaze/op_helper.c
@@ -419,32 +419,33 @@ void mb_cpu_transaction_failed(CPUState *cs, hwaddr physaddr, vaddr addr,
int mmu_idx, MemTxAttrs attrs,
MemTxResult response, uintptr_t retaddr)
{
- MicroBlazeCPU *cpu;
- CPUMBState *env;
+ MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
+ CPUMBState *env = &cpu->env;
+
qemu_log_mask(CPU_LOG_INT, "Transaction failed: vaddr 0x%" VADDR_PRIx
" physaddr 0x" TARGET_FMT_plx " size %d access type %s\n",
addr, physaddr, size,
access_type == MMU_INST_FETCH ? "INST_FETCH" :
(access_type == MMU_DATA_LOAD ? "DATA_LOAD" : "DATA_STORE"));
- cpu = MICROBLAZE_CPU(cs);
- env = &cpu->env;
- cpu_restore_state(cs, retaddr, true);
if (!(env->msr & MSR_EE)) {
return;
}
- env->ear = addr;
if (access_type == MMU_INST_FETCH) {
- if ((env->pvr.regs[2] & PVR2_IOPB_BUS_EXC_MASK)) {
- env->esr = ESR_EC_INSN_BUS;
- helper_raise_exception(env, EXCP_HW_EXCP);
+ if (!cpu->cfg.iopb_bus_exception) {
+ return;
}
+ env->esr = ESR_EC_INSN_BUS;
} else {
- if ((env->pvr.regs[2] & PVR2_DOPB_BUS_EXC_MASK)) {
- env->esr = ESR_EC_DATA_BUS;
- helper_raise_exception(env, EXCP_HW_EXCP);
+ if (!cpu->cfg.dopb_bus_exception) {
+ return;
}
+ env->esr = ESR_EC_DATA_BUS;
}
+
+ env->ear = addr;
+ cs->exception_index = EXCP_HW_EXCP;
+ cpu_loop_exit_restore(cs, retaddr);
}
#endif
--
2.25.1
next prev parent reply other threads:[~2020-08-31 16:23 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 16:04 [PULL 00/76] target/microblaze improvements Richard Henderson
2020-08-31 16:04 ` [PULL 01/76] tests/tcg: Add microblaze to arches filter Richard Henderson
2020-08-31 16:04 ` [PULL 02/76] tests/tcg: Do not require FE_TOWARDZERO Richard Henderson
2020-08-31 16:04 ` [PULL 03/76] tests/tcg: Do not require FE_* exception bits Richard Henderson
2020-08-31 16:04 ` [PULL 04/76] target/microblaze: Tidy gdbstub Richard Henderson
2020-08-31 16:04 ` [PULL 05/76] target/microblaze: Split out PC from env->sregs Richard Henderson
2020-08-31 16:04 ` [PULL 06/76] target/microblaze: Split out MSR " Richard Henderson
2020-08-31 16:04 ` [PULL 07/76] target/microblaze: Split out EAR " Richard Henderson
2020-08-31 16:04 ` [PULL 08/76] target/microblaze: Split out ESR " Richard Henderson
2020-08-31 16:04 ` [PULL 09/76] target/microblaze: Split out FSR " Richard Henderson
2020-08-31 16:04 ` [PULL 10/76] target/microblaze: Split out BTR " Richard Henderson
2020-08-31 16:04 ` [PULL 11/76] target/microblaze: Split out EDR " Richard Henderson
2020-08-31 16:04 ` [PULL 12/76] target/microblaze: Split the cpu_SR array Richard Henderson
2020-08-31 16:04 ` [PULL 13/76] target/microblaze: Fix width of PC and BTARGET Richard Henderson
2020-08-31 16:04 ` [PULL 14/76] target/microblaze: Fix width of MSR Richard Henderson
2020-08-31 16:05 ` [PULL 15/76] target/microblaze: Fix width of ESR Richard Henderson
2020-08-31 16:05 ` [PULL 16/76] target/microblaze: Fix width of FSR Richard Henderson
2020-08-31 16:05 ` [PULL 17/76] target/microblaze: Fix width of BTR Richard Henderson
2020-08-31 16:05 ` [PULL 18/76] target/microblaze: Fix width of EDR Richard Henderson
2020-08-31 16:05 ` [PULL 19/76] target/microblaze: Remove cpu_ear Richard Henderson
2020-08-31 16:05 ` [PULL 20/76] target/microblaze: Tidy raising of exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 21/76] target/microblaze: Mark raise_exception as noreturn Richard Henderson
2020-08-31 16:05 ` [PULL 22/76] target/microblaze: Remove helper_debug and env->debug Richard Henderson
2020-08-31 16:05 ` [PULL 23/76] target/microblaze: Rename env_* tcg variables to cpu_* Richard Henderson
2020-08-31 16:05 ` [PULL 24/76] target/microblaze: Tidy mb_tcg_init Richard Henderson
2020-08-31 16:05 ` [PULL 25/76] target/microblaze: Split out MSR[C] to its own variable Richard Henderson
2020-08-31 16:05 ` [PULL 26/76] target/microblaze: Use DISAS_NORETURN Richard Henderson
2020-08-31 16:05 ` [PULL 27/76] target/microblaze: Check singlestep_enabled in gen_goto_tb Richard Henderson
2020-08-31 16:05 ` [PULL 28/76] target/microblaze: Convert to DisasContextBase Richard Henderson
2020-08-31 16:05 ` [PULL 29/76] target/microblaze: Convert to translator_loop Richard Henderson
2020-08-31 16:05 ` [PULL 30/76] target/microblaze: Remove SIM_COMPAT Richard Henderson
2020-08-31 16:05 ` [PULL 31/76] target/microblaze: Remove DISAS_GNU Richard Henderson
2020-08-31 16:05 ` [PULL 32/76] target/microblaze: Remove empty D macros Richard Henderson
2020-08-31 16:05 ` [PULL 33/76] target/microblaze: Remove LOG_DIS Richard Henderson
2020-08-31 16:05 ` [PULL 34/76] target/microblaze: Ensure imm constant is always available Richard Henderson
2020-08-31 16:05 ` [PULL 35/76] target/microblaze: Add decodetree infrastructure Richard Henderson
2020-08-31 16:05 ` [PULL 36/76] target/microblaze: Convert dec_add to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 37/76] target/microblaze: Convert dec_sub " Richard Henderson
2020-08-31 16:05 ` [PULL 38/76] target/microblaze: Implement cmp and cmpu inline Richard Henderson
2020-08-31 16:05 ` [PULL 39/76] target/microblaze: Convert dec_pattern to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 40/76] target/microblaze: Convert dec_and, dec_or, dec_xor " Richard Henderson
2020-08-31 16:05 ` [PULL 41/76] target/microblaze: Convert dec_mul " Richard Henderson
2020-08-31 16:05 ` [PULL 42/76] target/microblaze: Convert dec_div " Richard Henderson
2020-08-31 16:05 ` [PULL 43/76] target/microblaze: Unwind properly when raising divide-by-zero Richard Henderson
2020-08-31 16:05 ` [PULL 44/76] target/microblaze: Convert dec_bit to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 45/76] target/microblaze: Convert dec_barrel " Richard Henderson
2020-08-31 16:05 ` [PULL 46/76] target/microblaze: Convert dec_imm " Richard Henderson
2020-08-31 16:05 ` [PULL 47/76] target/microblaze: Convert dec_fpu " Richard Henderson
2020-08-31 16:05 ` [PULL 48/76] target/microblaze: Fix cpu unwind for fpu exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 49/76] target/microblaze: Mark fpu helpers TCG_CALL_NO_WG Richard Henderson
2020-08-31 16:05 ` [PULL 50/76] target/microblaze: Replace MSR_EE_FLAG with MSR_EE Richard Henderson
2020-08-31 16:05 ` [PULL 51/76] target/microblaze: Cache mem_index in DisasContext Richard Henderson
2020-08-31 16:05 ` [PULL 52/76] target/microblaze: Fix cpu unwind for stackprot Richard Henderson
2020-08-31 16:05 ` [PULL 53/76] target/microblaze: Convert dec_load and dec_store to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 54/76] target/microblaze: Assert no overlap in flags making up tb_flags Richard Henderson
2020-08-31 16:05 ` [PULL 55/76] target/microblaze: Move bimm to BIMM_FLAG Richard Henderson
2020-08-31 16:05 ` Richard Henderson [this message]
2020-08-31 16:05 ` [PULL 57/76] target/microblaze: Store "current" iflags in insn_start Richard Henderson
2020-08-31 16:05 ` [PULL 58/76] tcg: Add tcg_get_insn_start_param Richard Henderson
2020-08-31 16:05 ` [PULL 59/76] target/microblaze: Use cc->do_unaligned_access Richard Henderson
2020-08-31 16:05 ` [PULL 60/76] target/microblaze: Replace clear_imm with tb_flags_to_set Richard Henderson
2020-08-31 16:05 ` [PULL 61/76] target/microblaze: Replace delayed_branch " Richard Henderson
2020-08-31 16:05 ` [PULL 62/76] target/microblaze: Tidy mb_cpu_dump_state Richard Henderson
2020-08-31 16:05 ` [PULL 63/76] target/microblaze: Convert brk and brki to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 64/76] target/microblaze: Convert mbar " Richard Henderson
2020-08-31 16:05 ` [PULL 65/76] target/microblaze: Reorganize branching Richard Henderson
2020-08-31 16:05 ` [PULL 66/76] target/microblaze: Convert dec_br to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 67/76] target/microblaze: Convert dec_bcc " Richard Henderson
2020-08-31 16:05 ` [PULL 68/76] target/microblaze: Convert dec_rts " Richard Henderson
2020-08-31 16:05 ` [PULL 69/76] target/microblaze: Tidy do_rti, do_rtb, do_rte Richard Henderson
2020-08-31 16:05 ` [PULL 70/76] target/microblaze: Convert msrclr, msrset to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 71/76] target/microblaze: Convert dec_msr " Richard Henderson
2020-08-31 16:05 ` [PULL 72/76] target/microblaze: Convert dec_stream " Richard Henderson
2020-08-31 16:05 ` [PULL 73/76] target/microblaze: Remove last of old decoder Richard Henderson
2020-08-31 16:05 ` [PULL 74/76] target/microblaze: Remove cpu_R[0] Richard Henderson
2020-08-31 16:06 ` [PULL 75/76] target/microblaze: Add flags markup to some helpers Richard Henderson
2020-08-31 16:06 ` [PULL 76/76] target/microblaze: Reduce linux-user address space to 32-bit Richard Henderson
2020-09-01 0:21 ` [PULL 00/76] target/microblaze improvements no-reply
2020-09-01 0:32 ` no-reply
2020-09-01 12:17 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831160601.833692-57-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).