From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Edgar E . Iglesias" <edgar.iglesias@xilinx.com>,
peter.maydell@linaro.org
Subject: [PULL 07/76] target/microblaze: Split out EAR from env->sregs
Date: Mon, 31 Aug 2020 09:04:52 -0700 [thread overview]
Message-ID: <20200831160601.833692-8-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200831160601.833692-1-richard.henderson@linaro.org>
Continue eliminating the sregs array in favor of individual members.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/microblaze/cpu.h | 1 +
target/microblaze/gdbstub.c | 4 ++--
target/microblaze/helper.c | 6 +++---
target/microblaze/op_helper.c | 8 ++++----
target/microblaze/translate.c | 6 ++++--
5 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/target/microblaze/cpu.h b/target/microblaze/cpu.h
index 36de61d9f9..c9035b410e 100644
--- a/target/microblaze/cpu.h
+++ b/target/microblaze/cpu.h
@@ -238,6 +238,7 @@ struct CPUMBState {
uint32_t regs[32];
uint64_t pc;
uint64_t msr;
+ uint64_t ear;
uint64_t sregs[14];
float_status fp_status;
/* Stack protectors. Yes, it's a hw feature. */
diff --git a/target/microblaze/gdbstub.c b/target/microblaze/gdbstub.c
index e4c4936a7a..e33a613efe 100644
--- a/target/microblaze/gdbstub.c
+++ b/target/microblaze/gdbstub.c
@@ -65,7 +65,7 @@ int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
val = env->msr;
break;
case GDB_EAR:
- val = env->sregs[SR_EAR];
+ val = env->ear;
break;
case GDB_ESR:
val = env->sregs[SR_ESR];
@@ -121,7 +121,7 @@ int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
env->msr = tmp;
break;
case GDB_EAR:
- env->sregs[SR_EAR] = tmp;
+ env->ear = tmp;
break;
case GDB_ESR:
env->sregs[SR_ESR] = tmp;
diff --git a/target/microblaze/helper.c b/target/microblaze/helper.c
index a18314540f..afe9634781 100644
--- a/target/microblaze/helper.c
+++ b/target/microblaze/helper.c
@@ -85,7 +85,7 @@ bool mb_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
qemu_log_mask(CPU_LOG_MMU, "mmu=%d miss v=%" VADDR_PRIx "\n",
mmu_idx, address);
- env->sregs[SR_EAR] = address;
+ env->ear = address;
switch (lu.err) {
case ERR_PROT:
env->sregs[SR_ESR] = access_type == MMU_INST_FETCH ? 17 : 16;
@@ -145,7 +145,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
qemu_log_mask(CPU_LOG_INT,
"hw exception at pc=%" PRIx64 " ear=%" PRIx64 " "
"esr=%" PRIx64 " iflags=%x\n",
- env->pc, env->sregs[SR_EAR],
+ env->pc, env->ear,
env->sregs[SR_ESR], env->iflags);
log_cpu_state_mask(CPU_LOG_INT, cs, 0);
env->iflags &= ~(IMM_FLAG | D_FLAG);
@@ -188,7 +188,7 @@ void mb_cpu_do_interrupt(CPUState *cs)
qemu_log_mask(CPU_LOG_INT,
"exception at pc=%" PRIx64 " ear=%" PRIx64 " "
"iflags=%x\n",
- env->pc, env->sregs[SR_EAR], env->iflags);
+ env->pc, env->ear, env->iflags);
log_cpu_state_mask(CPU_LOG_INT, cs, 0);
env->iflags &= ~(IMM_FLAG | D_FLAG);
env->pc = cpu->cfg.base_vectors + 0x20;
diff --git a/target/microblaze/op_helper.c b/target/microblaze/op_helper.c
index 3668382d36..5bacd29663 100644
--- a/target/microblaze/op_helper.c
+++ b/target/microblaze/op_helper.c
@@ -78,7 +78,7 @@ void helper_debug(CPUMBState *env)
qemu_log("PC=%" PRIx64 "\n", env->pc);
qemu_log("rmsr=%" PRIx64 " resr=%" PRIx64 " rear=%" PRIx64 " "
"debug[%x] imm=%x iflags=%x\n",
- env->msr, env->sregs[SR_ESR], env->sregs[SR_EAR],
+ env->msr, env->sregs[SR_ESR], env->ear,
env->debug, env->imm, env->iflags);
qemu_log("btaken=%d btarget=%" PRIx64 " mode=%s(saved=%s) eip=%d ie=%d\n",
env->btaken, env->btarget,
@@ -431,7 +431,7 @@ void helper_memalign(CPUMBState *env, target_ulong addr,
"unaligned access addr=" TARGET_FMT_lx
" mask=%x, wr=%d dr=r%d\n",
addr, mask, wr, dr);
- env->sregs[SR_EAR] = addr;
+ env->ear = addr;
env->sregs[SR_ESR] = ESR_EC_UNALIGNED_DATA | (wr << 10) \
| (dr & 31) << 5;
if (mask == 3) {
@@ -450,7 +450,7 @@ void helper_stackprot(CPUMBState *env, target_ulong addr)
qemu_log_mask(CPU_LOG_INT, "Stack protector violation at "
TARGET_FMT_lx " %x %x\n",
addr, env->slr, env->shr);
- env->sregs[SR_EAR] = addr;
+ env->ear = addr;
env->sregs[SR_ESR] = ESR_EC_STACKPROT;
helper_raise_exception(env, EXCP_HW_EXCP);
}
@@ -488,7 +488,7 @@ void mb_cpu_transaction_failed(CPUState *cs, hwaddr physaddr, vaddr addr,
return;
}
- env->sregs[SR_EAR] = addr;
+ env->ear = addr;
if (access_type == MMU_INST_FETCH) {
if ((env->pvr.regs[2] & PVR2_IOPB_BUS_EXC_MASK)) {
env->sregs[SR_ESR] = ESR_EC_INSN_BUS;
diff --git a/target/microblaze/translate.c b/target/microblaze/translate.c
index 9f2dcd82cd..62747b02f3 100644
--- a/target/microblaze/translate.c
+++ b/target/microblaze/translate.c
@@ -1809,7 +1809,7 @@ void mb_cpu_dump_state(CPUState *cs, FILE *f, int flags)
qemu_fprintf(f, "rmsr=%" PRIx64 " resr=%" PRIx64 " rear=%" PRIx64 " "
"debug=%x imm=%x iflags=%x fsr=%" PRIx64 " "
"rbtr=%" PRIx64 "\n",
- env->msr, env->sregs[SR_ESR], env->sregs[SR_EAR],
+ env->msr, env->sregs[SR_ESR], env->ear,
env->debug, env->imm, env->iflags, env->sregs[SR_FSR],
env->sregs[SR_BTR]);
qemu_fprintf(f, "btaken=%d btarget=%" PRIx64 " mode=%s(saved=%s) "
@@ -1873,8 +1873,10 @@ void mb_tcg_init(void)
tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, pc), "rpc");
cpu_SR[SR_MSR] =
tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, msr), "rmsr");
+ cpu_SR[SR_EAR] =
+ tcg_global_mem_new_i64(cpu_env, offsetof(CPUMBState, ear), "rear");
- for (i = SR_MSR + 1; i < ARRAY_SIZE(cpu_SR); i++) {
+ for (i = SR_EAR + 1; i < ARRAY_SIZE(cpu_SR); i++) {
cpu_SR[i] = tcg_global_mem_new_i64(cpu_env,
offsetof(CPUMBState, sregs[i]),
special_regnames[i]);
--
2.25.1
next prev parent reply other threads:[~2020-08-31 16:10 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 16:04 [PULL 00/76] target/microblaze improvements Richard Henderson
2020-08-31 16:04 ` [PULL 01/76] tests/tcg: Add microblaze to arches filter Richard Henderson
2020-08-31 16:04 ` [PULL 02/76] tests/tcg: Do not require FE_TOWARDZERO Richard Henderson
2020-08-31 16:04 ` [PULL 03/76] tests/tcg: Do not require FE_* exception bits Richard Henderson
2020-08-31 16:04 ` [PULL 04/76] target/microblaze: Tidy gdbstub Richard Henderson
2020-08-31 16:04 ` [PULL 05/76] target/microblaze: Split out PC from env->sregs Richard Henderson
2020-08-31 16:04 ` [PULL 06/76] target/microblaze: Split out MSR " Richard Henderson
2020-08-31 16:04 ` Richard Henderson [this message]
2020-08-31 16:04 ` [PULL 08/76] target/microblaze: Split out ESR " Richard Henderson
2020-08-31 16:04 ` [PULL 09/76] target/microblaze: Split out FSR " Richard Henderson
2020-08-31 16:04 ` [PULL 10/76] target/microblaze: Split out BTR " Richard Henderson
2020-08-31 16:04 ` [PULL 11/76] target/microblaze: Split out EDR " Richard Henderson
2020-08-31 16:04 ` [PULL 12/76] target/microblaze: Split the cpu_SR array Richard Henderson
2020-08-31 16:04 ` [PULL 13/76] target/microblaze: Fix width of PC and BTARGET Richard Henderson
2020-08-31 16:04 ` [PULL 14/76] target/microblaze: Fix width of MSR Richard Henderson
2020-08-31 16:05 ` [PULL 15/76] target/microblaze: Fix width of ESR Richard Henderson
2020-08-31 16:05 ` [PULL 16/76] target/microblaze: Fix width of FSR Richard Henderson
2020-08-31 16:05 ` [PULL 17/76] target/microblaze: Fix width of BTR Richard Henderson
2020-08-31 16:05 ` [PULL 18/76] target/microblaze: Fix width of EDR Richard Henderson
2020-08-31 16:05 ` [PULL 19/76] target/microblaze: Remove cpu_ear Richard Henderson
2020-08-31 16:05 ` [PULL 20/76] target/microblaze: Tidy raising of exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 21/76] target/microblaze: Mark raise_exception as noreturn Richard Henderson
2020-08-31 16:05 ` [PULL 22/76] target/microblaze: Remove helper_debug and env->debug Richard Henderson
2020-08-31 16:05 ` [PULL 23/76] target/microblaze: Rename env_* tcg variables to cpu_* Richard Henderson
2020-08-31 16:05 ` [PULL 24/76] target/microblaze: Tidy mb_tcg_init Richard Henderson
2020-08-31 16:05 ` [PULL 25/76] target/microblaze: Split out MSR[C] to its own variable Richard Henderson
2020-08-31 16:05 ` [PULL 26/76] target/microblaze: Use DISAS_NORETURN Richard Henderson
2020-08-31 16:05 ` [PULL 27/76] target/microblaze: Check singlestep_enabled in gen_goto_tb Richard Henderson
2020-08-31 16:05 ` [PULL 28/76] target/microblaze: Convert to DisasContextBase Richard Henderson
2020-08-31 16:05 ` [PULL 29/76] target/microblaze: Convert to translator_loop Richard Henderson
2020-08-31 16:05 ` [PULL 30/76] target/microblaze: Remove SIM_COMPAT Richard Henderson
2020-08-31 16:05 ` [PULL 31/76] target/microblaze: Remove DISAS_GNU Richard Henderson
2020-08-31 16:05 ` [PULL 32/76] target/microblaze: Remove empty D macros Richard Henderson
2020-08-31 16:05 ` [PULL 33/76] target/microblaze: Remove LOG_DIS Richard Henderson
2020-08-31 16:05 ` [PULL 34/76] target/microblaze: Ensure imm constant is always available Richard Henderson
2020-08-31 16:05 ` [PULL 35/76] target/microblaze: Add decodetree infrastructure Richard Henderson
2020-08-31 16:05 ` [PULL 36/76] target/microblaze: Convert dec_add to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 37/76] target/microblaze: Convert dec_sub " Richard Henderson
2020-08-31 16:05 ` [PULL 38/76] target/microblaze: Implement cmp and cmpu inline Richard Henderson
2020-08-31 16:05 ` [PULL 39/76] target/microblaze: Convert dec_pattern to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 40/76] target/microblaze: Convert dec_and, dec_or, dec_xor " Richard Henderson
2020-08-31 16:05 ` [PULL 41/76] target/microblaze: Convert dec_mul " Richard Henderson
2020-08-31 16:05 ` [PULL 42/76] target/microblaze: Convert dec_div " Richard Henderson
2020-08-31 16:05 ` [PULL 43/76] target/microblaze: Unwind properly when raising divide-by-zero Richard Henderson
2020-08-31 16:05 ` [PULL 44/76] target/microblaze: Convert dec_bit to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 45/76] target/microblaze: Convert dec_barrel " Richard Henderson
2020-08-31 16:05 ` [PULL 46/76] target/microblaze: Convert dec_imm " Richard Henderson
2020-08-31 16:05 ` [PULL 47/76] target/microblaze: Convert dec_fpu " Richard Henderson
2020-08-31 16:05 ` [PULL 48/76] target/microblaze: Fix cpu unwind for fpu exceptions Richard Henderson
2020-08-31 16:05 ` [PULL 49/76] target/microblaze: Mark fpu helpers TCG_CALL_NO_WG Richard Henderson
2020-08-31 16:05 ` [PULL 50/76] target/microblaze: Replace MSR_EE_FLAG with MSR_EE Richard Henderson
2020-08-31 16:05 ` [PULL 51/76] target/microblaze: Cache mem_index in DisasContext Richard Henderson
2020-08-31 16:05 ` [PULL 52/76] target/microblaze: Fix cpu unwind for stackprot Richard Henderson
2020-08-31 16:05 ` [PULL 53/76] target/microblaze: Convert dec_load and dec_store to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 54/76] target/microblaze: Assert no overlap in flags making up tb_flags Richard Henderson
2020-08-31 16:05 ` [PULL 55/76] target/microblaze: Move bimm to BIMM_FLAG Richard Henderson
2020-08-31 16:05 ` [PULL 56/76] target/microblaze: Fix no-op mb_cpu_transaction_failed Richard Henderson
2020-08-31 16:05 ` [PULL 57/76] target/microblaze: Store "current" iflags in insn_start Richard Henderson
2020-08-31 16:05 ` [PULL 58/76] tcg: Add tcg_get_insn_start_param Richard Henderson
2020-08-31 16:05 ` [PULL 59/76] target/microblaze: Use cc->do_unaligned_access Richard Henderson
2020-08-31 16:05 ` [PULL 60/76] target/microblaze: Replace clear_imm with tb_flags_to_set Richard Henderson
2020-08-31 16:05 ` [PULL 61/76] target/microblaze: Replace delayed_branch " Richard Henderson
2020-08-31 16:05 ` [PULL 62/76] target/microblaze: Tidy mb_cpu_dump_state Richard Henderson
2020-08-31 16:05 ` [PULL 63/76] target/microblaze: Convert brk and brki to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 64/76] target/microblaze: Convert mbar " Richard Henderson
2020-08-31 16:05 ` [PULL 65/76] target/microblaze: Reorganize branching Richard Henderson
2020-08-31 16:05 ` [PULL 66/76] target/microblaze: Convert dec_br to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 67/76] target/microblaze: Convert dec_bcc " Richard Henderson
2020-08-31 16:05 ` [PULL 68/76] target/microblaze: Convert dec_rts " Richard Henderson
2020-08-31 16:05 ` [PULL 69/76] target/microblaze: Tidy do_rti, do_rtb, do_rte Richard Henderson
2020-08-31 16:05 ` [PULL 70/76] target/microblaze: Convert msrclr, msrset to decodetree Richard Henderson
2020-08-31 16:05 ` [PULL 71/76] target/microblaze: Convert dec_msr " Richard Henderson
2020-08-31 16:05 ` [PULL 72/76] target/microblaze: Convert dec_stream " Richard Henderson
2020-08-31 16:05 ` [PULL 73/76] target/microblaze: Remove last of old decoder Richard Henderson
2020-08-31 16:05 ` [PULL 74/76] target/microblaze: Remove cpu_R[0] Richard Henderson
2020-08-31 16:06 ` [PULL 75/76] target/microblaze: Add flags markup to some helpers Richard Henderson
2020-08-31 16:06 ` [PULL 76/76] target/microblaze: Reduce linux-user address space to 32-bit Richard Henderson
2020-09-01 0:21 ` [PULL 00/76] target/microblaze improvements no-reply
2020-09-01 0:32 ` no-reply
2020-09-01 12:17 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831160601.833692-8-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).