[PATCH v2 3/3] docs/system/arm/mps2.rst: Make board list consistent

[Peter Maydell <peter.maydell@linaro.org>]

Make the list of MPS2 boards consistent in the phrasing of each
entry, use the correct casing of "Arm", and move the mps2-an511
entry so the list is in numeric order.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/mps2.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
index 7f2e9c8d52e..8c5b5f1fe07 100644
--- a/docs/system/arm/mps2.rst
+++ b/docs/system/arm/mps2.rst
@@ -11,17 +11,17 @@ as seen by the guest depend significantly on the FPGA image.
 QEMU models the following FPGA images:
 
 ``mps2-an385``
-  Cortex-M3 as documented in ARM Application Note AN385
+  Cortex-M3 as documented in Arm Application Note AN385
 ``mps2-an386``
-  Cortex-M4 as documented in ARM Application Note AN386
+  Cortex-M4 as documented in Arm Application Note AN386
 ``mps2-an500``
-  Cortex-M7 as documented in ARM Application Note AN500
-``mps2-an511``
-  Cortex-M3 'DesignStart' as documented in AN511
+  Cortex-M7 as documented in Arm Application Note AN500
 ``mps2-an505``
-  Cortex-M33 as documented in ARM Application Note AN505
+  Cortex-M33 as documented in Arm Application Note AN505
+``mps2-an511``
+  Cortex-M3 'DesignStart' as documented in Arm Application Note AN511
 ``mps2-an521``
-  Dual Cortex-M33 as documented in Application Note AN521
+  Dual Cortex-M33 as documented in Arm Application Note AN521
 
 Differences between QEMU and real hardware:
 
-- 
2.20.1